Results for
INTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
The screw elements can be mounted on a square shaft. You transport bulk materials into bins or silos via rotary movements.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Pipe lining made of cast polyurethane (75 Shore A). The lining is held from the outside via two flanges. Due to the extremely good abrasion resistance you have proven our linings!
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
For forklift trucks and crawler undercarriages we supply undercarriage rollers with polyurethane coating incl. rim. Whether made of steel, aluminum or plastic - we supply you with the complete roller
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Yellow ejector rings with high-precision polyurethane coating for use in steel service centers.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Available with stainless steel axle with suspension for permanent belt contact. We will be happy to assist you with the initial installation. Thanks to an approval according to various EU regulations, we can offer you a top material with the casting polyurethane Intec E for extreme applications in contact with food. Whether for small quantities from 1 or for large-volume components weighing up to 900 kg - Intec E covers the entire range in hardnesses from 45 Shore A to 93 Shore A.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
The row of fingers is cast on a steel rod and then riveted with other rods on a belt of rubber.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Hedgehog fingers/ hedgehog mats/ hedgehog bands are used for safe transport of sensitive and pressure-sensitive fruit as well as vegetables. The hedgehog tapes can even be glued with a PVC carrier tape. Thanks to an approval according to various regulations of the EU, we can offer you a top material with the casting polyurethane Intec E for extreme applications in contact with food. Whether for small quantities from 1 or for large-volume components weighing up to 900 kg, Intec E covers the entire range in hardnesses from 45 Shore A to 93 Shore A. If you need large quantities, we offer food contact approved materials in injection molding with up to 6 kg weight and 1.5 m² area.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Coated track plates for use in crawler tracks for construction machinery. The extremely wear-resistant polyurethane Intec E provides the necessary mechanical properties for use in the crawler and protects the floor from the high machine weight. Up to 1.5 m length possible!
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Seeder housing as a completely assembled assembly group - this is used in mechanical seeders for metering the seed or fertilizer.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
We coat rollers up to 3 m in diameter and weighing up to 2 t! We will be happy to provide you with rollers complete with wheels. We have good international contacts for procuring wheels made from steel, aluminium and stainless steel. Upon request we can mill a profile in the coating or form profiles directly during casting.
Request for a quoteW. MÜLLER GMBH
Germany
Space-saving in a vertical (e.g. for retrofitting) but also in a horizontal version, our extruders are available in many variations for your specific needs. For applications with larger throughputs, we have high-quality extruders with heat-separated feed zone cooling, which deliver a high-quality melt for the further process. We also offer coordinated screw designs for special materials such as PVC, PA, EVOH, E-PET or adhesive layers.
Request for a quoteHODA, UAB
Lithuania
There are a variety of methods used to process plastic. Each method has its advantages and disadvantages and are better suited for specific applications. These methods include: injection molding, blow molding, thermoforming, transfer molding, reaction injection molding, compression molding, and extrusion.
Request for a quotePLASTEMA SP. Z O.O. SP.K.
Poland
Our injection department is also involved in injection molds testing. We test injection molds for tool shops and customers who import molds, e.g. from China. In addition to tool testing, we also assess the quality of workmanship, check the compliance of the construction documentation with the actual state and possible modifications to the forms.
Request for a quotePLASTEMA SP. Z O.O. SP.K.
Poland
There are currently 14 injection molding machines with clamping forces from 60 to 250 tons in our production plant. The maximum weight is about 600 grams. We process both bulk and construction materials. We process materials such as: - PP, - PE, - PVC, - PA6 (also modified varieties - e.g. modified with glass fiber up to 40%), - PA6.6, - POM, - PBT, - Thermoplastic elasotmers, - SAN, - PS, - PC, - PMMA.
Request for a quotePLASTEMA SP. Z O.O. SP.K.
Poland
Many years of our technologists' experience in the field of projects implementation and development of technologies allow us to help with our customers' obstacles. We can deal with: - technology development in injection molding plants, - we help in the preparation of a business plan and commissioning of entire production plants or injection department in plants that have previously outsourced production to an external injection molding company.
Request for a quotePLASTEMA SP. Z O.O. SP.K.
Poland
Our company is into designing of details made of plastic. The design department, which cooperates with mold designers and injection technologists, has extensive practical knowledge that allows us to develop technologically correct projects. We also work with designers who support us in the design of functional elements.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AMETEK ENGINEERED MEDICAL COMPONENTS
United States
AMETEK EMC offers technical expertise and precision engineering to support customers in the development and manufacture of the most demanding applications.
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
With the METROFLOW gravimetric material loader, plastic processors can automate important areas of the production process cost-effectively and efficiently. The METROFLOW weighs every single load and evaluates the results, with a guaranteed precision of <1%. This improves the entire material management process and allows for full traceability. The material loaders come in 6, 10 and 30 liter volumes. The METROFLOW series is part of the motan range of products and systems for all stages of management, conditioning and preparation of plastic granules. The design quality, plus the engineering, ensures high performance and reliable operation.
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
In the plastics compounding and manufacturing process there are many powders (all with different flow properties) which require handling. For the vacuum conveying of both free-flowing and non-free-flowing powders, motan has a solution. The METRO P series of hopper loaders are available in two versions and guarantee reliable and dust-free conveying. The METRO PC system loaders are designed to be integrated into centralised motan conveying systems. The METRO PB single loaders are designed to be used as a “stand-alone” solution. From the material source right through to the point of processing, motan offers the ideal solution for your powder handling requirements.
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
With the METRO G/F/R material loaders, large quantities of granulate, dusty regrind and flakes can be conveyed automatically to the hopper of a processing machine, drying bin or day bin. Filters with sophisticated cleaning technology and large outlet flaps guarantee trouble-free operation. Via the hinged lid, free from vacuum and material hoses, the loaders can be quickly and easily cleaned during material changes.
Request for a quoteASSFALG GMBH
Germany
It is the perfect battery-operated tool for deburring, separating, grinding and polishing. Due to its unrestricted mobility, the MT-A enables continuously fatigue-free and efficient work. In addition, its precise and powerful motor makes it easy to process any material. Almost all fields of application are covered.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accessories mainly used in water sports accessories.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
CNC plastic turning machining,mainly use for very precise mechanical parts.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
A universal fast cutting mixture of fine and medium fine abrasive particles, for outstanding buffing action. Formulated for professwnal, high temperature machine buffing, but can also be applied by hand. Especially formulated for the preparation and maintenance of polyester and epoxy moulds or surfaces. Developed tot quick and easy removel of the „coarse marks" and scratches remaining on the surface after the „wet and dry" sanding procedure. M-200 LIQUID EXTRA HEAVY DUTY CLEANER, is the most abrasive cleaner and the first to be used after the sanding procedure - then followed with M-300 LIQUID HEAVY DUTY CLEANER (fine abrasive), for the final high gloss surface. The unique feature of the polishing alumina used for the OSKAR'S M-200 and M-300, is that the abrasive particles „break-down" to finer and finer particle size, during the application, and thereby ensure both effective and gentle cleaning and polishing action simultaneously, without any possible damage to the gel-coat.
Request for a quotePEEKCHINA CO., LTD.
China
The ARKPEEK-MOD PEEK sheave bushing is a high-performance product designed for industrial applications. It combines 10% carbon fiber, 10% PTFE, 10% graphite, and 70% PEEK, providing exceptional strength, durability, and resistance to wear, chemicals, and heat. With self-lubricating properties and low friction, it offers smoother operation and extended service life. Choose the ARKPEEK-MOD PEEK sheave bushing for reliable and cost-effective performance in aerospace, automotive, and manufacturing industries.
Request for a quotePEEKCHINA CO., LTD.
China
Our PEEK thrust washer inner is a high-performance component designed to provide exceptional performance and reliability in various industrial applications. Made from durable PEEK material, our thrust washer offers superior temperature resistance, wear resistance, and corrosion resistance, making it an ideal solution for harsh environments. Unlike traditional metal washers, our PEEK thrust washer provides a lightweight and cost-effective alternative without compromising on durability or efficiency. Whether you're looking for a high-speed application solution or a corrosion-resistant solution for harsh environments, our PEEK thrust washer inner is the perfect choice to enhance the performance of your machinery.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.
Request for a quotePEEKCHINA CO., LTD.
China
Manufactured PEEK Parts Welcome to our world of exceptional engineering, where we specialize in crafting non-standard PEEK parts designed to surpass conventional expectations. Our dedication to precision and innovation means we can provide you with custom solutions that are tailored to your exact specifications and requirements. Whether you have specialized applications or unique design challenges, our CNC machining expertise ensures that you receive top-quality PEEK components that not only meet but exceed industry standards. Trust us to deliver the precision, reliability, and performance you need to elevate your projects to new heights.
Request for a quoteResults for
Plastics processing - Import exportNumber of results
182 ProductsCountries
Company type
Category