Plastic supports - Import export

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Support sleeves for reinforcing plastic components. Made of stainless steel with customised design. The bushings can be produced not only round but also oval as a deep-drawn part.

Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a broad temperature range For example, electric motors, drives, control systems and telecommunication and navigation systems under arctic conditions, Bowden cables and brake mechanisms in aircraft, sliding parts in shock-freezing systems etc. Lubricating grease for plastic/plastic and plastic/metal pairs and elastomers For plastic sliding coatings in bridge supports and as a parting agent in plastics processing Advantages and benefits Highly effective due to optimum formula Broad temperature range with a wide range of possible uses Excellently suited for lubricating plastics and elastomers Lubricating grease resistant to ageing, especially at low temperatures

(1) Material of poutry slat floor: polypropylene (2) 3 sizes of our slat floor: *1.2m (Length)x0.5m (Width)x0.04m (thickness) *1m (Length)x0.5m (Width)x0.04m (thickness) *0.5m (Length)x0.4m (Width)x0.04m (thickness) (3) Hole size of slat floor: 2.2*2 cm(big hole) and 2*1.5cm(small hole) *big hole used for adult chicken,duck,goose and other poutry *small hole used for baby chicken ,duch,goose and other poutry (3) Hole size of slat floor: 2.2*2 cm(big hole) and 2*1.5cm(small hole) *big hole used for adult chicken,duck,goose and other poutry *small hole used for baby chicken ,duch,goose and other poutry (4)Accessories :incuding bracket ,PVC support/pipe and plastic fiberglass beam: *Bracket and PVC support/pipe: Note：for the PVC support:40-50cm / length , the diameter is 5cm *plastic fiberglass beam：length :1-6m ; height:12cm or 9 cm (5)Quality:has been exporting USA,Canada,New zealand, best quality

Stamped leadframes are designed to support and accomodate electronic components and PCBA. They can be made with full or selective tin, nickel, silver or gold plating depending on the final requirement. They can be made with pressfit terminals to be inserted into Printed circuit boards. 3 D stamped leadframes can also be designed to your needs. Overmolded leadframes made with high performance plastic resins are designed to support components which are protected in a housing. The overmolding housing allows for the integration of : - the connection area for power components bonding - the output connector to the customer interface - specific terminals to accomodate components to be soldered in electric capacitors for example.

The Relax RDF standard mattress, for a matrimonial bed for two people, is made of hardwood, multi-layered beech, which offers flexibility and resistance over time, supporting a weight of over 350 kg. The slats of the mattress are slightly curved and have a width of 6.8 cm, thickness of 0.8 cm, being fixed in plastic supports (H20 boxes), embedded in the sides of the struts, which have a section of 6 cm x 2.5 cm, thus eliminating the unpleasant creaking. The transverse bar under the slats provides extra safety and prevents the frames from drifting apart over time, successfully coping with long-term use. The slats are made by industrial processing of the treated beech log. Beech is a hardwood, the best in quality compared to birch, poplar or others. The lamellas are formed by pressing sheets of technical veneer at a high temperature, after first passing them through an adhesive.

The Relax RUF standard bed frame, for a single bed, is made of hardwood, multi-layered beech, which offers flexibility and resistance over time, supporting a weight of over 200 kg. The slats of the mattress are slightly curved and have a width of 6.8 cm, thickness of 0.8 cm, being fixed in plastic supports (H20 boxes), embedded in the sides of the struts, which have a section of 6 cm x 2.5 cm, thus eliminating the unpleasant creaking. The transverse bar under the slats provides extra safety and prevents the frames from drifting apart over time, successfully coping with long-term use. The slats are made by industrial processing of the treated beech log. Beech is a hardwood, the best in quality compared to birch, poplar or others. The lamellas are formed by pressing sheets of technical veneer at a high temperature, after first passing them through an adhesive.

The Relax RDLC standard bed frame, for a single bed, is made of hardwood, multi-layered beech, which offers flexibility and resistance over time, supporting a weight of over 250 kg. It presents an increased resistance due to the wide and slightly curved blades, being also ideal for overweight people. The slats of the mattress have a width of 17 cm, thickness of 0.8 cm, being fixed in plastic supports (H20 boxes), embedded in the sides of the struts, which have a section of 6 cm x 2.5 cm, thus eliminating the unpleasant creaking. The transverse bar under the slats provides extra safety and prevents the frames from drifting apart over time, successfully coping with long-term use. The slats are made by industrial processing of the treated beech log. Beech is a hardwood, the best in quality compared to birch, poplar or others. The lamellas are formed by pressing sheets of technical veneer at a high temperature, after first passing them through an adhesive.

The mobile fence system (standard size 25 0 cm x 20 0 cm) can be produced in different lengths. It can be assembled to plastic floor supports or floor support plates or bottom of frame vertical profiles, where it can be easily mounted on precast concrete blocks under profile, galvanized or electrostatic painted.

Services include - Custom machining of steel, stainless steel & other materials including nylon and plastic parts - Production and support tooling - Design, prototype, test and assembly Examples of work - Plastic ware parts for vial guides - End of conveyor turn guides - Inspection stations ** Ask for a quote **

Full customization (design, material, shape, color etc.), free samples & small order quantity! from Turkey Material Aluminium, inox (stainless steel), brass... Surface / Coating Polishing (polished), brushing (brushed), anodized coating (eloxal), chrome coating (chrome plated), painting, sandblasting, vibration, for brass: gold/silver/lack Color Metallic grey, black, nickel white, gold, silver, any color upon request Application / Usage Built-in ovens High Quality & Responsible After Sales Service ISO9001:2008 quality system & applying highly strict QA/QC system, from raw material to after sales of the goods.. Full Customization & Free Sample Type of material, design, surface treatment, color, branding... Any kinds of customization are warmly welcome! Fast Response & Fast Delivery Responding your messages latest in 2 hours! Fast delivery, approximately in 10-15 days for your customized needs!

Aluminium Mat Inox Anodized Handle With Plastic Support