Plastic mounted - Import export

For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel

Mounting plate steel/plastic. Monitor bracket aluminium. Bearing washers and sleeves plastic. Mounting flange aluminium. Mounting adapter aluminium. Screws steel. Version: Mounting plate painted. Monitor bracket painted. Mounting flange painted. Mounting adapter painted. Screws electro zinc-plated

Available in many versions for use in a wide variety of media such as water, acids, oils, fuels, etc. Float and housing in plastic Versions for mounting vertically or horizontally With cable outlet or plug connection

ELECTRICAL ELEVATOR WITH FRONT TIPPING BY 85° FPLTM10E The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. Equipped with sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors. OPERATION: After braking the wheels, for lifting it is sufficient to press the button on the rudder which regulates the ascent and descent of the forks. The tilting is done by pressing the buttonhole located on the rudder, the UP button tilts the load to the operator, while the DOWN button will lower it again.

With hexagonal spanner face and Torx drive for easy mounting Installation with plastic plugs or directly in wood We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

ELEVATOR WITH MANUAL TIPPING FRONT A 85° FPLTM10M The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. The trolley is equipped with a lever valve with two positions (lifting and tilting) Placing the lever on the lifting forks are raised horizontally up to 285 mm. from the floor, by positioning the lever on the opposite side starts tilting gradual up to a maximum of 85 °. Sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors.

The TLS 100 tube sensor works on the capacitive measuring principle and detects the presence of a liquid in a plastic tube. These plastic tubes may also be mounted as a by-pass on a compensator in order to signal the required medium level in containers. The sensor is simply snapped onto the tube at the ideal level of the medium and provides versatile usage for a wide range of applications in medical equipment, the food stuffs industry etc. The sensor can additionally be fixed by means of the two mounting lugs to ensure a tight fit on the tube. Caution The switch point is factory pre-set so as to lie exactly between the two mounting clips. When readjusting the switch point, please observe that it again lies between the two clips. A mass surface in the proximity (< 10 mm) may influence the switch point and may necessitate a readjustment.

Our special types of sealing brushes consist of 16 particular plastic profiles which we can supply in a comprehensive range of variations. The two constructions of sealing brushes are: Strip brush construction: that means our strip brushes with metal backing are mounted in plastic profiles. Punched brush construction: consisting of a solid plastic profile with bundle holes in which the fill material has been mechanically anchored. Depending on the fill material you can choose a fill density of high EA1, medium EA2 or low EA3. You can choose:- all fill types, e.g. natural bristles and hair, plant fibres, wires and synthetic filaments. - different trim heights (BH) (free bristle length) We can also supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Standard lengths are usually 1000 mm or 2000 mm. On request lengths of up to 5000 mm can be supplied, depending on the type of profile. Of...

The sturdy stainless steel and impact-resistant plastic housings are designed for mounting on tubs or similar containers. With the stainless steel brackets on the rim of the tank, the fill level can be easily adjusted. The fill level can also be finely adjusted on the PEKI brass high-performance float valve for high and low pressure. Stepless adjustment, simple installation, low wear, long service life and safe operation of the autotanker for automatic filling.

Outer body steel. Mounting bush plastic. Version: Steel electro zinc-plated. Note: Rotation dampers are maintenance-free, ready-to-install elements for the controlled braking and damping of rotational or linear movements. These rotation dampers enable the smooth opening and closing of small covers, compartments and drawers. They protect sensitive components and can also raise the quality and value of products. The rotation dampers brake right or left rotations or in both directions. One cycle rate corresponds to one 360° right rotation and one 360° left rotation. Attention: The rotation damper bush should not be used as a support, but rather as an external guide or bearing.

Ming Xiao Mfg engaged in custom plastic injection parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic injection parts,steel pins inserted plastic parts. We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance. Plastic injection parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc. welcome contact us for a quoting!

Ming Xiao Mfg engaged in custom plastic molded parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic molded parts,steel pins inserted plastic parts. We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance. Plastic parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc. Plastic injection molding is suit to complicated plastic parts with complex profile or structure, welcome contact us for quoting!

Ming Xiao Mfg engaged in custom plastic molded parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic molded parts,steel pins inserted plastic parts. We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance. Plastic parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc. Plastic injection molding is suit to complicated plastic parts with complex profile or structure, welcome contact us for quoting!

Ming Xiao Mfg engaged in custom plastic molded parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic molded parts,steel pins inserted plastic parts. We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance. Plastic parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc. sales@mxmparts.com WhatsApp +86 13780014913

Ming Xiao Mfg engaged in custom plastic injection parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic injection parts,steel pins inserted plastic parts. We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance. Plastic injection parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc. welcome contact us for a quoting!

Ming Xiao Mfg engaged in custom plastic molded parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic molded parts,steel pins inserted plastic parts. We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance. Plastic parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc. Plastic injection molding is suit to complicated plastic parts with complex profile or structure, welcome contact us for quoting!

The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum media compatibility. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — high overpressure capability — pure ceramic sensor — especially for tank level measurement of viscous and aggressive media — housing material PP-HT or PVDF — diaphragm ceramics Al2O3 (99.9 %) Optional Features: — different kinds of cable and seal materials — prepared for mounting with pipe

Flush-mount niches 60 F series in technopolymer, for connection to filling fuel flexible hose Ø 60 mm. These niches are supplied in combination with three of our female threaded tank caps, passage diameter 54 mm: ALU 2″ tank cap ALU M60X2 tank cap M60X2 tank cap with key We can produce our flush-mount plastic compartments for plug housing in a wide range of colors (black, blue, red, green, white) to meet the most varied aesthetic requirements or allow a better identification of the type of fluid to be loaded into the tank. It’s available the new rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster.

Cases for deck filler 32-40-50 mm series in technopolymer, for connection to filling flexible hose with three different diameters: Ø 32 mm (for water) Ø 40 mm (for fuel) Ø 50 mm (for fuel). These niches are supplied in combination with three possible our internal bayonet tank caps passage diameter 40 mm: 240 tank cap AIR tank cap V7 S tank cap It’s available the new rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster. We can produce our flush-mount plastic compartments for plug housing in a wide range of colors (black, blue, red, green, white) to meet the most varied aesthetic requirements or allow a better identification of the type of fluid to be loaded into the tank.

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

This product is made of high-grade polycarbonate or ABS and are typically designed for enclosing electrical and electronic components and even complete small-scale controllers. The BERNSTEIN Series CT plastic enclosers all comes with a transparent polycarbonate cover and follows protection class IP 65 of DIN EN 60529. Also provided are attachment bosses on the enclosures' base to built-in components mounting. Components can be easily secured using self-tapping mounting screws. These plastic enclosures allows various direct mounting options because attachment bosses' location and installation of mounting rails is possible. The BERNSTEIN Series CT enclosures are manufactured with the BERNSTEIN developed and patented quick-release fastener.

In Case Of Fire Do Not Use Lift | Lift Sign All signs have braille characters to meet ADA regulations. 1/8" thick injection-molded plastic. Double-sided mounting tape included.

The stiffness adjustment sliders are made of a rubberized and very resistant plastic. It is mounted on the slats of the mattress in the lumbar area, to adjust their stiffness. By moving the sliders closer, the lamellae become more elastic and flexible, while moving them away towards the extremities, the lamellae become stiffer, harder. They are available for 3.8 cm and 6.8 cm wide slats.

The workplace-system luminaire WLA illustrates just what flexibility looks like. Versions in four different lengths provide individual lighting for any table width in a wide range of industrial applications. To minimise installation work even at daisy-chained workplaces, the concept enables multiple luminaires to be through-wired. — LED technology — Colour temperature neutral white 5000 K — Colour rendering Ra > 80 — Glare-free thanks to structured cover — Housing made of colourless anodised aluminium and grey plastic — PC screen — Mounting by means of T-slots (8 mm) or luminaire bracket (accessories) — Switch for On/Off — Degree of protection IP20, protection class I — Supplied with built-in Wieland GST18i3 connector / socket (luminaires with through-wiring) — Accessories: Cables, Luminaire bracket sets

The adjustable ALD arm-mounted luminaire appeals for its flexible head joint and balanced arm. The wide area of illumination of the work area and option of continuous dimming ensure ergonomic working, even for activities that take a long time. Plus the ALD is suitable for use in all kinds of industrial environments. — LED technology — Colour temperature neutral white 5000 K — Colour rendering Ra > 80 — Glare-free thanks to structured cover — Housing made of colourless anodised aluminium and grey plastic — Polycarbonate plastic screen — Ergonomic arm-mounting technology with 3D head joint — Touch panel in luminaire head for On / Off and dimming — Degree of protection IP20; protection class I — Supplied with approx. 3 m connecting cable and plug-in power supply with plug type CEE 7/16 (Europlug), BS 1363 and NEMA 1-15P — Various fasteners as accessories

Cube connector (set) 2D and 3D, to connect three aluminum profiles at right angles with cover caps to cover the bores Different sizes: — Profile: 20, 30, 40, 45 — Profile: 1" — Profile groove 5; 6; 8; 10 Material: — Cube connector: die-cast aluminium, bright or aluminium-coloured — Cover cap: PA plastic — Mounting set Steel, galvanised Various types/versions: — Individually with cover caps — optionally incl. mounting set Various screws are available: ISO 7380 M5x14 or UNC 1/4-20x1" self-tapping screws S8x25-SW5 or S12x30 - Torx T50 Translated with www.DeepL.com/Translator (free version)

Monitor Work Station SIT / STAND 4-axis, Profile Attachment 40 (Set) For mounting of monitors with 2 - 8 kg, mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; fold-up holder with wrist rest for keyboard up to 2.5 kg, incl. left or right pull-out shelf for mouse, as well as holders for hand scanner and mouse; 360° mounting flange can be attached lateral, transverse, or on the face of the profile, if attached on the front face, the core hole of the respective profile must be M8 threaded Material Monitor Work Station: Steel / aluminum / plastic #b Cable management cover: Plastic #b Mounting flange: Aluminum die-cast #b Screws: Steel Surface/Color: Monitor Work Station: Gray Lacquered Cable management cover: Gray Lacquered Mounting flange: Alu color Zinc plated

The JETBOXX® mini top-mounted dryers are particularly applicable where small material flow rates with the highest drying precision are required. Due to their compact design, the plastic granulate dryers can be mounted on the feed section of the injection molding machine without any difficulty. The dryers are available with a volume of 0,5/1,0/2,5/5/6/12/18 litres and can be optimally adapted to your requirements with a large number of options from the JETBOXX® system. Compressed air conveyors of one or two components with or without dedusting function are available. Filling by hand is also possible via hinged covers. The compressed air-based dryers are maintenance-free and provide professional functions such as: plastic-specific and throughput dependent dryer settings, database for plastics, conveying control, week timer, overheating protection, dew point measurement, speed dial programs, personal programs, and many more.

JETBOXX® plastic granulate dryers are compressed air based dry-air dryers for mounting directly on the feed section of the processing machine. The JETBOXX® technology guarantees perfect drying results thanks to plastic-specific and throughput-dependent dryer settings. The dryers are available with a volume of 30/50/75 litres and can be optimally adapted to your requirements with a large number of options from the JETBOXX® system. The JETBOXX® control provides a database for plastics, conveying control, week timer, fully automatic decrease and resume of the drying intensity when production is interrupted (overheating protection), automatic restart with preheating program in 1- or 2 shift operation, dew point measurement, speed dial programs, personal programs, and many more. Compressed air conveyors of one or two components with or without dedusting function are available. The conveying control is already included.