Plastic fasteners - Import export

Features • Without pre-drilling in single-layer gypsum plasterboards • No cracking of the surface due to special thread geometry • In gypsum plasterboards high holding values up to 8 kg per fixing point • PZ2 driver for simple installation Description & Area of Application • Glass fibre reinforced gypsum plasterboard wall plug • Reinforced drill tip for easy installation without additional setting tool • For single layer gypsum plasterboards • Spiral + screw: Screw with PZ driver

Features • All-purpose for almost all building materials • Approved by the building authorities • Also approved for the fastening of ceiling substructures • 70 mm anchoring depth for secure hold in perforated brick • Fire resistance class R90 (in concrete) • Optimised spreading geometry • Can be processed down to -20°C • Also suitable for natural stone with dense structure • Countersunk screw with internal driver TX40 for flush installations Description & Area of Application • 2-way split spreader element with rotation lock • For fastening facade and roof substructures, doors, windows, etc. • The Fassad is supplied as a fastening kit with screw

Features • Up to 30% greater holding values than other expansion wall plugs • Several active rotation locks • Also suitable for chipboard screws • High material content for high holding values • Secure screw guidance • 100% nylon • The flexible wall plug neck adapts itself to the drill hole Description & Area of Application • Expansion wall plug for solid building materials • 2-way split spreader elements with rotation locks and flexible wall plug neck • Halogen-free • Can be used with wood, chipboard and hanger bolts • Barracuda + Screw: Screw with PZ drive

Features • Screws can be screwed in very easily due to the special geometry • Wall plug cap protects the surface to prevent slipping deeper into the drill hole • Ties or expands automatically depending on the building material • Detachable wall plug cap for prepositioned and push-through installation Description & Area of Application • All-purpose wall plug for almost all building materials • 4-way split wall plug body for uniform force distribution • Anti-rotation locks on wall plug neck prevent rotation in the building material • Deco + Screw: Screw with PZ driver

Features • Wall plug cap protects the surface and prevents slipping deeper into the drill hole • Holds in almost all building materials • Ties or expands depending on the building material • Anti-rotation locks prevent rotation in the drill hole • Suitable for pre-positioned installation Description & Area of Application • All-purpose wall plug for almost all building materials • 3-way split wall plug body with wall plug cap • Anti-rotation locks on wall plug neck and wall plug body prevent rotation in the building material • Trika + screw: Countersunk screw with PZ driver

Various product ranges to assemble and fasten easily panels

Features • The original all-purpose wall plug - often copied, but never equalled • Holds in almost all building materials • Ties or expands automatically depending on the building material • No turning in the drill hole • Pre-positioned and push-through installation Description & Area of Application • 3-way split wall plug body without wall plug cap • Anti-rotation locks on wall plug neck and wall plug body prevent rotation in the building material • Tri + Screw: Countersunk screw with PZ driver

Features • Ideal for perforated brick (Poroton) and cellular concrete (Ytong) • Extremely high holding values • Spreads in several directions • Rotors prevent rotation in the drill hole • 100% nylon • Long expansion range for secure anchoring • Also suitable for metric threaded rods Description & Area of Application • Multiple expansion by 2-way separated expansion elements which are offset by 90° with moving rotors and flexible wall plug neck • Large anchoring depth

Plastic Fixings & Fasteners (or simply put Nylon) are often employed for fixing panels into position, however they are also regularly used for assorted tasks such as grouping cables together for health and safety purposes. Being made mainly from Plastics and Nylon, these are high performance parts created for specific uses such as the ones mentioned above. All sizes and variations can be found by clicking through to our website, we also have a huge number of free samples available for people to try if they would like to test the sizing of a product beforehand.

The Micron TEP 3 machine is the machine that bridges the gap between the hobbyists and professionals. The free standing or bench mounted feature of this machine makes it top of the line choice as its deep frame feature allows a comfortable work space and can easily be transported to the job site. Package Deal Includes √ TEP 3 Fastener Attaching Machine √ #3 Plastic Grommet dies √ 1 bag of #3 Plastic Grommets and Washers (500 pcs of each) The Micron TEP 3 is the grommet press that bridges the gap between hobbyists and professionals. The Professionals like this machine because it is a fully capable well built machine that is light weight so it is easy to carry from station to station in the shop and to outside jobs. The hobbyists love this grommet press because they can get professional results at very affordable price.

All dies, sold separately. Our portable pneumatic fastener attaching machine is the top choice for the tarp industry as its light weight portability will allow you to take this machine to any job site. It is built on casters so you can work on the floor to install grommets on your heavy duty tarps or banners that are too heavy to lift up. This machine will accommodate installation sizes from # 1.7 to # 3 grommets and can be used with our heavy duty industrial dies for the toughest material installations. The interchangeable dies and the grommets are sold separately. The metal base and the casters are included with the PL 10. At Micron, we Manufacture Quality and Reliability. 60516 (1) High Quality, Easy Portability. The Micron PL 10 high quality portable Grommet Press has a handle on top and is easy to carry around in the shop or to outside job locations.

is a special fastener designed for reliability and an easy direct assembly into thermoplastics. Enhancement when compared with Polymate30: The re-designed geometrical flank allows for optimized movement of plastic material while initiating the fastening procedure. Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. At the same nominal diameter, up to 50% gain in torsional and tensile strength. As there is a larger core and reduction in the thread pitch length, shorter fasterners and/or smaller diameters may be used. Improved pitch provides added vibrational safety. SOMETIMES SMALLER IS BETTER The visuals below show the advantages of a reduced fastener length and diameter by comparing Polymate30 to Polymate20. Substitute A provides a reduction in length, whereas Substitute B provides a reduction in diameter. For both scenarios, the reduction in pitch from the Polymate20 provides a maintainted thread flank.

FEATURES AND BENEFITS Enhancement when compared with Polymate30: • The re-designed geometrical flank allows for the optimized movement of plastic material while initiating the fastening procedure. • Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. • At the same nominal diameter, up to 50% gain in torsional and tensile strength. • As there are a larger core and reduction in the thread pitch length, shorter fasteners and/or smaller diameters may be used. • Improved pitch provides added vibrational safety.

Plastic fastener for fixing solar fuse connector in solar panel systems

plastic bloc for fastening of tubes

Item No.: 992xxx Cord fastener Specification Plastic cord fastener Model type: S (Standard) Material: Polyamide Colour: black/grey Packaging: in PE bag

Item No.:600012 Rear parcel shelf cord Specification Rear parcel shelf cord Braided cord with injection-moulded plastic fasteners Model type: C (Customised) Dimensions: Diameter approx. 3.0 mm Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Directly injection-moulded plastic

Schmale clasps give your plastic packaging a special touch. Our clasps and clasping systems are produced in various designs and ways of operating; they also offer a number of possibilities for customising and for different ways of fastening. Many models of clasps can be customised with either your or your customer‘s logo and available in a wide range of material and surface options. Taking into consideration the material properties and wall thicknesses of your plastic packaging, we offer you fastening machines which are specially designed for our clasping system and ensure highly efficient and economical processing, optimising your production processing. Should you have additional questions or special requirements please contact us » Clasps for fastening to plastic Schmale clasps give your plastic packaging a special touch. Our clasps and clasping systems are produced in various designs and ways of operating; they also offer a number of...

Hinges for fastening to plastic Schmale hinges also give your plastic packaging that special touch. A number of designs and ways of working as well as a wide range of materials and surface options enable you to find a perfect match for your plastic product styles. Together Schmale hinges and clasps give your product a harmonious overall image. Taking into consideration the material properties and wall thicknesses of your packaging, our hinges and hinge systems offer you, according to your requirements, various fastening possibilities and a highly efficient and economical way of fastening hinges using fastening machines specially designed for our hinge systems. Single hinges for nailing or screwing are recommended for smaller quantities. Should you have additional questions or special requirements please contact us » Hinges for fastening to plastic Schmale hinges also give your plastic packaging that special touch. A number of designs and ways of working as well as a wide...

available in 16 colors excellent acoustic performance made of recycled plastic bottles a set of fasteners included

Easy assembly by thumb pressure! The rivets provide a cheap way to fasten metal, plastic, timber and other thin-walled materials. Resistant to vibrations, abrasion and corrosion. Reusable! Can also be used as a plug or cap. Material: PA 6.6 Colours: Last digits 000 = natural Last digits 699 and 599 = black

Hood with fastening stoppers and lined with mesh Side pockets with plastic zip Elastic fastening with stoppers at the bottom

Splints are specially shaped plates made of plastic (disposable) with longitudinal and transverse perforations for easy modeling of any size of the splint according o the extremity. Fastening of splints is made using the bandages or a textile fastener of the Velcro type (option). The cervical collar is a two-component structure that is adjustable against both neck volume and neck height. Fixing of collars is carried out by means of a textile fastener. Disposable splints (plastic) are ideal for use in places where conventional cardboard tires are not suitable for climatic conditions (rain, snow, etc.) Advantages: - Lightweight and compact! All splints and collars are foldable, unobstructive, and fit into any medical set. - Multipurpose and easy to use! They can be transformed to any size – it is enough to bend the ends of the splints along the contour until the desired length is obtained. Easily and tightly modeled on the shape of the extremity.

The filter housing is made of sturdy steel plate with a reinforcement of structural steel frame. Equipped with inlet and outlet openings for the dusty or filtered air. The inspection cap is used to control the automatic filter and has a flap for access to the built-in filter cartridges. These are made of folded polyester material having a filter area of each of 8 and 14 m². Provided with upper and lower reinforcing rings of plastics material for fastening in the holders. The dust drawer is equipped with wheels, allowing easy extraction during disposal of the dust. The centrifugal fan with a flanged electric motor and the fan / motor unit is built up in the filter housing - the motor is bolted with its flanges on the filter housing and surrounded by the sound enclosure.