Results for
GLT BEARINGS GMBH
Germany
Thermoplastic all-plastic plain bearing | Maintenance-free COM-KU®/X is a self-lubricating and maintenance-free plastic plain bearing made of a high-quality plastic compound with the best sliding properties. Excellent tribological properties, especially for dry running. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Filament-wound composite bearing with self-lubricating inner | Surface backed with a high-strength | Maintenance-free | With a sliding layer of PTFE with lubricant additives COM-KU®/M is a self-lubricating and maintenance-free plastic plain bearing. Using a heavy-duty glass fibre fabric combined with a selected binder resin helps to increase the mechanical properties, pressure further and wear resistance of this bearing type. The special lubricant additives and the PTFE in the sliding layer reduce the friction coefficient, optimising the wear behaviour and thus the material's service life as a dry sliding bearing. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Fibre-reinforced compound plain bearing in wound technology | Maintenance-free | High load capacity COM-KU®/D is a self-lubricating and maintenance-free compound plain bearing. It has good sliding properties and is suitable for loads (also impact loads and with edge pressures). Good damping properties, very suitable for low sliding speeds, good chemical resistance, and long service life. Suitable as a replacement for lubricated bearings. For technical details, please visit the product page on our website!
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
Our ACP Group offers over 400 different variants of stamped and lanced metal carriers. These carriers are used in a wide variety of sealing systems. Only high-quality raw materials such as steel, aluminium and stainless steel from certified suppliers are used for production. The Huehoco Group also offers a wide range of coating options. From functional to decorative coatings, our customers can choose from a wide range of products. We offer suitable bonding agents for almost all types of rubber and plastic compounds.
Request for a quoteDEUTSCHES METALLFASERWERK DR. SCHWABBAUER GMBH & CO. KG
Germany
Material: low carbon steel We offer our STAX steel fibers as short fiber according to customer specification (on special request as well as strand on reels). The Ø-fiber strength is approx. 30-50 μm. Regular analyses in our laboratory ensure the quality of our products. Main area of application for our STAX steel fibers is friction material for brakes and clutches, and as concrete reinforcement or in plastic compounds. Further we produce segment wire steel fibers for reinforcement of conrete floors for example.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Elastomer or plastic sealing elements and also elements made of composite materials (elastomer + plastic or metal) can be compounded with metal detectable additives.
Request for a quoteDEUTSCHES METALLFASERWERK DR. SCHWABBAUER GMBH & CO. KG
Germany
Material: E-Cu58 Properties: good electrical and thermal conductivity We produce our STAX copper fibers Cu99 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and fine 60 μm. STAX copper fibers Cu99 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for STAX copper fibers Cu99 are found in friction material as brake pads or clutches, further in plastic compounds, for shielding, in sport floors, on thatched roofs against growth of moss, as electrical and thermal conductor in different versions. If you are looking for copper fibers for your specific application, please do not hesitate to contact us.
Request for a quoteBALLERSTAEDT & CO. OHG
Germany
Preformed aluminium seals protect the product as well as the environment. They are made of aluminium-plastic compounds that provide an ideal protection against leaks and 100% tamper-proof. They can also be used to seal containers with aggressive chemicals and agro-chemicals. Their recessed shape or cap shape makes them idel for manual processing as they can easily be manually placed on the containers. Advantages reliable protection, also for aggressive products easy manual handling, self-centring
Request for a quoteHODA, UAB
Lithuania
HODA, UAB has reliable mold manufacturing partners in Europe and Asia. Also our company has all needed equipment to manufacture plastic moulds and plastic mould tools.
Request for a quoteNEDEX KIMYA SAN VE TIC A.S.
Turkey
NEDEX warm edge spacers (NANOBAR) have lowest Σλd- and Ψ-values. NANOBAR has maximum number of perforation holes for a better IGU performance. Nedex warm edge spacers can be produced in widths between 8-24 mm. The extruded part of spacer which gives the shape of spacer is produced by UV resistant plastic compounds with three different rigidity factors named by Nanobar, Nanobar-F and Nanobar-R. The colour of plastic part can be white, grey RAL7035, grey RAL7040, grey RAL9023 and black. Their stability and material specifications make their processing in bending lines possible. They can even be installed in IG units, which are under extreme external loads. Metallic and nonmetallic coatings at the backside of warm edge spacers guarantee perfect tightness against water vapour and argon permeation. Surfaces which are in contact with sealants have very good adhesion to sealants. NEDEX warm edge spacers have high UV stability, scratch resistancy
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
AMETEK has the metallurgical expertise to produce specialty powders for super-niche and highly engineered applications. Our experience has made us a global leader in the field. Customized and Specialty Alloys Utilizing high pressure water atomization under carefully controlled conditions, we develop innovative powders in an extensive range of standard and custom alloys. Niche Applications Our high alloy powders are used in specialty segments including Sintered Metal Filters, Fiber – polyester and nylon production, Plastic Compounding, Hardfacing and Surface Coating, Powder Metallurgy (P/M), and Metal Injection Molding (MIM). Typical alloys include
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
As a world class manufacturer of metallic powders used as plastic additives and fillers, we engineer alloyed stainless steel powders in fine and coarse mesh sizes. Our metal additives are uniquely suited for critical plastic and advanced polymer compounding applications. Products and Sizes We offer several different alloys and sizes of material specifically tailored for polymer compounding. Grades: Our metallurgists and engineers have worked to develop our polymer filler compounding products from 316L, 304L, 430L, and 410L alloys. Sizes: The above grades are typically offered in fine sizes and with surface areas suited to suspension in a variety of polymers. Our Plastic Compounding Fine Powder has a particle size approximately 30 microns.
Request for a quoteMINE COLOURS
Turkey
Foam Masterbatch for water tanks, Colour masterbatch for PVC and PPR Pipes, Masterbatch for crosslinked PE Pipes. Mine Colours has also designed a special Polypropylene Random Pipe Colour Masterbatch (PPR Pipes). This masterbatch has superior dispersibility of the pigments and does not damage rigidity, heat resistance and impact resistance of the pipe. The Polypropylene Random Pipe Colour Masterbatch contains some special additives which bring elasticity, flexibility and impact toughness while maintaining clarity in the Polypropylene Random copolymer. Masterbatch Applications: Plastics & Polymeric compounds are becoming increasingly important in today's Building and Construction industries, often replacing existing materials as they are more durable, longer-lasting and attractive. New applications are always being developed that need to encompass the requirements of strict building codes and regulations. Mine Colours offers comprehensive product range
Request for a quoteBALLERSTAEDT & CO. OHG
Germany
Preformed aluminium seals protect the product as well as the environment. They are made of aluminium-plastic compounds that provide an ideal protection against leaks and 100% tamper-proof. They can also be used to seal containers with aggressive chemicals and agro-chemicals. Their recessed shape or cap shape makes them idel for manual processing as they can easily be manually placed on the containers. Advantages reliable protection, also for aggressive products easy manual handling, self-centring Delivery MOQ: 10,000 pcs per size different shapes, sizes and materials available peelable and strong-weldable specifications availbale individual logo embossing possible customer specific design possible using digital print (also small batches) Application areas Chemical industry Cosmetics industry Pharmaceutical industry Food industry
Request for a quoteHEXPOL TPE GMBH
Germany
TPE compounds for plastic closures using the in shell liner moulding process The EPSeal 800 series was developed for PE and PP closures specially designed for the in shell moulding liner technology. The series includes versions for cold fill, pasteurisation and hot fill beverage treatment systems. This series also includes versions with different rheological values to address the special processing requirements of different lining machine types. An assortment of lubricant packages addresses the spectrum of closure and liner profile designs but all lead to a neutral taste and odour sealant whilst remaining consumer friendly and reliable. Download EPSeal Product Guide
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LAUSITZ ELASTE GMBH
Germany
Rubber-plastic compounds are a good alternative to rubber-metal compounds and bring significant weight advantages.
Request for a quoteMASKOM CARTRIDGES
Turkey
Maskom has been a global brand in more than 50 countries with its high quality product and service. Since its foundation in 2007 with the aim of having a presence everywhere, where the plastics are, the company has been producing plastic compound fillers and masterbatches. Maskom Plastic Cartridge Technologies business unit was launched in 2019 to meet the cartridge and accessories needs of manufacturers of sealants and adhesives by using state-of-the-art machinery, equipment and IML printing technology and by taking advantage of the experience in plastics industry.
Request for a quoteQUAY CHEMICALS B.V
United Kingdom
1,Chemical Name: Ammonium Acetate 2,Molecular Formula : CH3COONH4 3,Molecular Weight: 77.08 4,CAS:631-61-8 5,Character: It occurs as white triangular crystal with acetic acid smell. It's soluble in water and ethanol, but insoluble in acetone. Aqueous solution is neutral. 6,Usage: It's used as analytical reagent, meat preservative and also used in pharmacy. 7,Packing: It is packed with polyethylene bag as inner layer, and a compound plastic woven bag as outer layer. The net weight of each bag is 25kg. 8,Storage and Transport: It should be stored in a dry and ventilative warehouse, kept away from heat and moisture during transportation, unloaded with care so as to avoid damage. Furthermore, it must be stored separately from poisonous substances.
Results for
Plastic compounds - Import exportNumber of results
21 ProductsCompany type
Category