Piston seals - Import export

Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.

These sliding rings are the solution for designs which only allow room for a small or low housing. They are ideal for retrofitting into existing O‑ring grooves

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy. The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.

The tandem configuration of type 114 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.

When to use piston rings? When piston rings with excellent wear properties are required When simple assembly is of great importance When high edge loads occur When tailor-made solutions based on iglidur® materials are required When not to use piston rings? When the piston rings should seal simultaneously When different diameters should be covered by one part Before: with piston rings: Why complicate things when it can be done differently? Replace elaborately stamped PTFE tapes with a single clip-on guide ring, such as in lifting elements, control valves and fittings. We offer iglidur® piston rings made of freely selectable materials for a wide range of applications. Special properties Easy to assemble Low-priced More wear-resistant than PTFE-bonds Higher load capacity Defined dimensions different materials per ex. iglidur® J, J350… iglidur® piston rings - application examples When to use piston rings? When piston rings with excellent wear properties are required When simple assembly is of great importance When high edge loads occur When tailor-made solutions based on iglidur® materials are required When not to use piston rings? When the piston rings should seal simultaneously When different diameters should be covered by one part Installation recommendations pistons installation recommendations for housings Installation recommendations for housings Dimensions [mm] dS (h-tolerant) [mm] dG (h-tolerant) [mm] bg [mm] Nominal diameters dS = d1 dG = d2 bG = b1 +0,2 Installation recommendations for pistons Dimensions [mm] dG (h-tolerant) [mm] dH (h-tolerant) [mm] bg [mm] Nominal diameters dG = d1 dH = d2 bG = b1 +0,2 b1: Desired length Inner and outer Ø (d1 and d2) made using standard plain bearings* M for metric PRfor piston ring iglidur® desired material

BORSIG offers development, production and reconditioning of compressor parts, as well as their reconditioning and modification. Our product program comprises plate vales, ring valves, piston rod seals and oil scraper packings.

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

BVHS-GD 400 STEEL GALVANISED BVEHS-GD 400 STAINLESS STEEL Load Capacity: 400 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206). Material: Frame and cover in 2 mm cold-formed precision steel profiles. Underside of cover reinforced with steel girder. The frame is reinforced with an additional frame. Hot-dip galvanised. Or grade 304 stainless steel. High-load hinges. High-specification double-piston gas struts. EPDM seal. Robust steel mesh reinforcement. Features: Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaran- teed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. The access cover has a water drain nozzle. There is the option (if required) to connect a drain...

It is a consumable used in perfusor devices to give a drug to the patient at a certain time and at a certain rate. Since its tip can be locked in the form of a luer lock, it minimizes drug leakage and wrong drug delivery. There are two types, transparent and light sensitive. It is available in 2/3ml,5ml,10ml,20ml,50/60ml transparent and light sensitive (orange) sizes according to needs. Manufactured according to DIN EN ISO 7886. Our perfuser injectors, which have been used for a long time throughout Turkey with their wide product range, are compatible with all devices. Sterile, non-toxic, apyrogenic It has a latex-free double sealed piston with a special safety brake. With luer-lock connector. It has 15Gx1″ needles. PVC-free blister pack, Gamma(R) and/or E.O. has been sterilized. Opaque injectors are available in Black and Orange color options. Air bubbles and possible particles in the fluid can be easily observed in the orange injector.

SST STUD TENSIONER Quick Reaction Subsea Tensioner Our Subsea stud tensioner incorporating the quick reaction nut feature reduces diver fatigue, improving diver safety and productivity. Visible piston stroke indication Positive ‘over-stroke’ stop to prevent piston expulsion/seal damage. Piston/cylinder misalignment compensation Anti-slip cylinder surface for improved handling Low friction seals Anti-corrosion coating Bolt coverage from 3/4" to 4" (M20 to M100) Designed to fit BS1560/ANSI B16.5/API flanges, as well as most compact flange designs Piston stroke: 30mm except for SST1 - 20mm Max tool pressure: 21,750 psi (1,500 bar) Bolt protrusion above nut: refer to chart (specification) for stud protrusion requirements ‘D’ includes an allowance for tool removal after bolt tightening with 30mm tool stroke Product development is constantly taking place and dimensions may change without notice

WIND TENSIONERS Our tensioners have quality designed in with standard features that enhance durability and efficiency to get the job done faster and safer: Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclosed load cell eliminates debris in piston retraction mechanism Auto-Engaging Geared Nut Rotator Self-energizing, long life seals Enhanced Usability: Piston stroke limit indication High pressure swivel coupling (swivel is optional on WSS & WSL) 19,580 psi (1,350 bar maximum operating pressure) Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation Anti-slip grip surface Tool lifting-strap as standard WSS & WSL FOUNDATION WIND TENSIONERS Suitable for ISO Metric threaded and all-thread bars Geared or Manual Nut Rotator Long & short stroke models Maximum operating pressure 19,580 psi (1350 bar) Uses standard system 'nut' for reaction Contact factor for op

WIND TENSIONERS Our tensioners have quality designed in with standard features that enhance durability and efficiency to get the job done faster and safer: Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclosed load cell eliminates debris in piston retraction mechanism Auto-Engaging Geared Nut Rotator Self-energizing, long life seals Enhanced Usability: Piston stroke limit indication High pressure swivel coupling (swivel is optional on WSS & WSL) 19,580 psi (1,350 bar maximum operating pressure) Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation Anti-slip grip surface Tool lifting-strap as standard WSD COMPACT TOWER WIND TENSIONERS Robust Gearbox Drive Auto-Engaging Geared Nut Rotator Low height hydraulic load cell Fast application using 1/2" drive Cycle counter optional (Add “A” to end of part number) Maximum operating pressure 19,580 psi (1350 bar) Twin...

WIND TENSIONERS Our tensioners have quality designed in with standard features that enhance durability and efficiency to get the job done faster and safer: Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclosed load cell eliminates debris in piston retraction mechanism Auto-Engaging Geared Nut Rotator Self-energizing, long life seals Enhanced Usability: Piston stroke limit indication High pressure swivel coupling (swivel is optional on WSS & WSL) 19,580 psi (1,350 bar maximum operating pressure) Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation Anti-slip grip surface Tool lifting-strap as standard WDD UP TOWER WIND TENSIONERS Robust Gearbox Drive Auto-Engaging Geared Nut Rotator Small diameter, high load 2-Stage hydraulic load cell Fast application using 1/2" drive Cycle counter optional (Add “A” to end of part number) Max Pressure: 19,580 psi (1,350...

OEM Spare Parts for Concrete Pumps

OEM Spare Parts for Concrete Pumps

OEM Spare Parts for Concrete Pumps

BlueVCount measures gas volumes in reactions of all kind. It is applicable for fermentations, degradation studies, substrate comparison studies, wastewater treatment, bioethanol or hydrogen production and is especially helpful in bio methane potential (BMP) determinations in industry and academia. Gas volume measurement delivers important information about the process and helps to optimize yields and process procedures. BlueVCount is a volume measuring unit with a 1 ml cylinder that is equipped with an oil (special) sealed magnetic piston. It counts how often 1 ml gas comes through the cylinder and reports it to the integrated display or via Modbus RTU to a software (e.g. BlueVIS). A minimum flow is not necessary.

Advanced ceramics offer significant advantages over metals and plastics. They have in general good mechanical properties and are particularly resistant to compression. Some ceramics are very resistant to wear and friction. They also show relatively low friction coefficient and good toughness. It is also possible to achieve very good surface finishes that ensure leak tightness. Ceramics are all the more relevant when the application is associated with thermal stresses, abrasive particles or food compatibility. And ceramics are inert mateials that are resistant to many gases and acids. Applications In view of their mechanical properties and resistance to wear ceramics are found in the following mechanical industries : pumps valves dispensing units mechanical seals analyzing equipment Products Microcertec offer the following ceramic components : valve components pistons seal rings shear discs Materials There are many different types of ceramics that can meet the requirement for...

— brackets are equipped with cross slots to guarantee an ideal adjustment of the installation set — Length compensation fittings to find the optimum position of the water meter — Screw connections with roughened external thread for even more tightness QUICKTURN piston valves — easy operation by ergonomically shaped handles — fast operation with just a few turns from "open" to "closed" — Direction of rotation indication on the handle — The label on the handle allows the clear line marking — non-rising top — Dead space top — Functional parts of the piston valve maintenance-free and permanently lubricated — Deposition-resistant sealing piston by special profile All materials meet the requirements of the Federal Environmental Agency and are approved for drinking water.