Piling - Import export

Hydraulic Self Driving Drilling and Pile-Driving Machines

The grain thrower PZM-120M is an ideal machine for fast loading of any grain into any transport. PZM-120M grain thrower is also used to transfer grain from one place to another. During the transfer process, moisture and light impurities are partially removed from the grain. Transfer of grain is necessary during its long-term storage. PZM-120M grain loader quickly loads grain into grain carriers, automobiles, railway cars, containers, barges, trailers, etc. A full load of a grain truck takes about 15 minutes. The grain thrower PZM-120M is used to work with grain, oilseeds, legumes and industrial crops, while the trauma to the grain is minimal (less than 0.1%). During the operation of the grain thrower, the grain is fed to the conveyor using scraper feeders. The conveyor loads the grain into the trimmer, which throws it through a special guide tube. The trimmer with the pipe easily rotates 257 degrees. Changing the direction and height of grain flight is carried out in less than 3 sec.

Three identical vacuum lifting devices to lift and transport precast concrete piles at the outside storage facility in the United Kingdom. The Aerolift vacuum lifters ensure fast, efficient, and safe handling. Expected time saving of 70%!

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the TF – TV VM (VM = metal tank) series the cloth support is made of a perforated metal sheet drum. This model is used for wastewater treatment plants of small working capacity (up to 2.000 PE) or as a secondary treatment downstream from immobilized biomass systems. It is available for installation in concrete tanks or metal tanks versions. The equipment is supplied with an electrical switchboard. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The tertiary filtration is strongly influenced by the hydraulic profile of the plant, which often cannot be changed. In the PECV VM (VM = metal tank) disc filters series the collection shaft is placed vertically. The goal is to feed equipment completely submerged even with very low hydraulic profiles. Even for this series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PECV VM solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 10.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The PPC – PPC VM (VM = metal tank) series was developed for plants with medium-large potential. For filters in this range, cloth washing is done with two pumps only (of which one backup pump) which serveall the discs. The selection of discs on which to conduct the backwash (in sequence) is carried out by using double-acting valves with pneumatic control. The largest standard model in this series has a filtering surface of 160 m2 that can process a load equal to a community of approximately 50.000 PE. A singular feature of this series is the low energy consumption, even more noticeable with the increasing plant potential. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the PEC – PEC VM (VM = metal tank) series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PEC – PEC MT solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 20.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

Min Oil Flow: 100 l/min Working pressure: 150 bar Max centrifugal force: 12000 kg Vibration numbers: 2300 Weight: 1200 kg

The mohair/velour roller is high quality professional product, designed especially for treating even surfaces. "Velour" is highly resistant to aggressive solvents and provides a smooth and glossy finish to the covered areas. The sleeve is made from 100% woolen fabric with 4mm length of the pile. The product is available in various lengths and diameters of the refill.

„Green Light” is a high quality long pile paint roller with fibre length of 18mm. This is a professional product for exterior painting, intended for the application of water dispersion and masonry paints on rough and very uneven surfaces. "Green Light" is available in various lengths and diameters of the sleeve.

Axinar has designed and produces, solar panel stands and mounts for various applications. The structural elements are designed to be adaptable to different soil conditions and flexible in the construction space. Upon request, the base can be adjusted to any desired angle.

Individual products are fed to the punching area from the flat pile feeder and punched with the rotating flexibe die. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching punching cylinder with high precision without stopping. Inline configuration of the die-cutting machine with machines interfaced downstream such as folding machines, mailing systems and packaging machines is the most efficient way of carrying out multiple high-performance steps in one operation. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed. The maximum capacity of the machine is 12,000 sheets/h

The measuring probe lance is in the form of a length of 2000 mm and includes the three temperature sensors: - on the tip of the lance - at a distance of 750 mm from the tip and - at a distance of 500 mm from the end of the lance The lance tip has a rounded head, so when pushing into the pile it does not poke through encountered "in the way" compost components. The probe in wireless version is powered by a battery. Measurements and data are transmitted, depending on the version of the device, by wire or wireless.

Pile Weatherstrip which is used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 6,7 mm Total Height 5,0 mm Pile Density 2P2L, 3P2L, 3P3L, 4P2L Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip 4,8x8-3Р with glue / without glue which is used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 4,8 mm Total Height 8,0 mm Pile Density 2P2L, 3P2L Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip 4,8x6-3Р without glue / with glue Used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 4,8 mm Total Height 6,0 mm Pile Density 2P2L, 3P2L Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip which is used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 4,8 mm Total Height 4,0 mm Pile Density 2P2L, 3P2L Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip,dustproof and buffer brush - 6,7x9-3Р with glue / without glue Used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 6,7 mm Total Height 9,0 mm Pile Density 2P2L, 3P2L, 3P3L, 4P2L Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip which is used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 6,7 mm Total Height 5,0 mm Pile Density 2P2L, 3P2L, 3Р3L, 4P2L Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip,dustproof and buffer brush - 14x4-8Р without glue Used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 14 mm Total Height 4,0 mm Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip,dustproof and buffer brush - 9,5x4-6Р with glue / without glue Used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 9,5 mm Total Height 4,0 mm Pile Density 4P4L, 6P4L Sample: Freely Brand Name: KIAPLAST

Pile Weatherstrip which is used for sealing solution for different purposes. Colours: gray, white, brown, dark brown, black, gold, beige, bronze Sizes: Base width 4,8 mm Total Height 4,0 mm Pile Density 2P2L, 3P2L Sample: Freely Brand Name: KIAPLAST