Ph - Import export

Industrial type gear units operate especially under heavy working conditions, have rigid case, bear high moments up to 480000 Nm and stand out with silent operation and easy maintenance features

Milled peat Fraction:0-20 mm Raw material: sphagnum light peat Chemical characteristics: EC 0.1-0.3 mS/cm pH 4.2-4.7 (H2O) Additives: none

For head or field installation Feed via current loop Impedance monitoring

Dr. Paul Lohmann® offers Triammonium Citrate as crystalline powder in food and chem. pure grade. For food applications, it is used as acid regulator. For industrial applications, it is used as a pH buffer, catalyst and chelating agent. It also allows to increase the current density in electrochemical processes. CAS 3458-72-8 EINECS 222-394-5 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Sodium Succinate 6-hydrate as powder and solution in food/pharma and chem. pure grade. For biopharmaceutical applications, it is used as a pH buffer in cell culture media. For food applications, it is used as a flavoring agent. For industrial applications, it is used as a stabilizer for electroplating baths, as a nucleating polymer additive and as a crystallization modifier in gypsum production. CAS 6106-21-4 EINECS 205-778-7 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Tripotassium Citrate as powder, free flowing powder, fine powder, crystals in food/pharma/chem. pure grade as well as for food supplements. For pharmaceutical applications, it is used for the treatment of hypokalemia. For food applications, it is used as acid regulator. For industrial applications, it is used as pH buffer, complexer and conductivity enhancer for electrochemical processes. CAS 866-84-2 \ 6100-05-6 EINECS 212-755-5 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required

AVOLA Circular saw blade HM/A/PH for cutting polystyrene and wood Special benefits of our patented development: One saw blade for two materials For polystyrene (Styrodur and styrofoam) and wood No jamming and sticking, because the newly developed openings in the master blade ensure sufficient air cooling Even without blade replacement More safety and occupational protection Faster, more effective and environmentally friendly operation

The SPIROL Model PH Heat Insert Driver provides an accurate and consistent method to simultaneously install multiple Threaded Inserts or Compression Limiters at multiple elevations. Simultaneous installation dramatically increases productivity and simplifies the number of manufacturing steps to complete an assembly. Additionally, the platen head and fixture can be easily changed to accommodate quick change-over to different assemblies associated with new production runs. This machine can be used to install 12 Inserts into 1 assembly, or a fewer number of Inserts into a larger number of assemblies – as long as the total combination does not exceed 12 Inserts.

Complete set with accessories Temperature compensation Redox conversion Evaluation of electrode quality

Complete set with accessories Temperature compensation Redox conversion Evaluation of electrode quality

Complete set with accessories Temperature compensation Redox conversion Evaluation of electrode quality

Working range Blind rivets up to 4 mm Ø all materials. Not suitable for stainless steel CAP® blind rivets. Technical data Weight: 1.2 kg Operating air pressure: 6 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: 0.8-1.2 ltr. per rivet (0,2 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: 15 mm Nosepieces/accessories Nosepieces: 16/18, 16/24, 16/27 and 16/29 1 set of jaws, 1 spent mandrel bottle, 1 wrench each of MSU and MSZ, Maintenance instructions with spare parts list Features • Hydraulic head in aluminium with wear-proof cylinder surface • Pneumatic cylinder made of die cast aluminium • The piston made of hardened and hard chromium plated steel make the device easy to handle and wear-proof • Compact seals are wear-proof for a long service life • Fast venting valve for fast return and high working sequence • Low-noise pneumatic switching • Simple, low-interruption valve design • Hydraulic head can be adjusted by 360°

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Remove Heavy Metals and Organic Compounds from Wastewater to Comply with POTW Discharge Regulations PRAB works with many customers who produce wastewater that is either too acidic or too alkaline to be discharged into the public sewer. In these cases, a reliable pH adjustment system like the fully automated, skid-mounted systems offered by PRAB, could be the solution. The pre-packaged pH Adjustment Systems treat a wide variety of industrial waste streams and are configured to neutralize and automatically adjust the pH of wastewater, greatly reducing labor costs, eliminating accidents and potential illegal discharge violations. PRAB starts with a review of the application and then focus on which pH adjustment system will be best suited for the process. Customizable options are offered, which makes the selection process less challenging. PRAB has streamlined this process with its new water/wastewater analysis instrumentation and complimentary lab with pH testing equipment

Minesan Alkaline Mineral Herb Powder Nutritional supplement with the basic minerals sodium and calcium, the trace element zinc and herbal extracts of chamomile and melissa. Among other things, calcium contributes to normal function of digestive enzymes. The trace element zinc is a component of a variety of enzymes and makes a substantial contribution to a normal acid-base metabolism. In conjunction with a balanced, mineral-rich diet, Minesan supports a normal acid-base balance. pH-Test Strips Due to our often unbalanced diet, a lot of people are too acidic without knowing it. Therefore regularly check your acid value (pH factor). By using pH Test Strips, you can determine your pH factor quickly and easily. For monitoring of the pH level in urine pH 5.2–7.6. Serve exclusively for determining the pH level in any quantity of urine samples (collected in a container) from the human body.

• For Phillips cross-head screws • The ergonomic multi-component design with integrated soft zones and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • The handle core made of impact-resistant hard plastic is sheathed with various soft components and embedded highly flexible cushions which optimally adapt to the hand and ensure maximum force transmission • The flexibility of the material and the pleasant feeling of the high-speed turning zone additionally increases the sensitivity and supports the precise application of force • Practical hole booklet for hanging up the tools or for inserting a lever • Bit holder for the drive by, e.g. a ratchet or a cordless screwdriver • Bit storage in the cross hole possible • Insulation according to DIN EN/IEC 60900 • Blades made of chrome molybdenum vanadium steel • Blades hardened and black with injected insulation

pH sensor for water applications The OPTISENS PH 8100 sensor is characterised by standardised design, easy handling and a long life cycle. In combination with the MAC 100 signal converter it is possible to create an extremely reliable and low-cost measurement system, which is suitable for a wide range of water analysis measurement tasks. Designed as combined electrodes with built-in reference electrode the OPTISENS PH 8100 sensor type is equipped with two open diaphragms and integrated temperature sensor Pt100. The sensor can be easily adapted to various application requirements and it is extremely service friendly and durable.

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

Digital pH sensor SMARTPAT analytical sensors from KROHNE are the first and only sensor line in the market with integrated transmitter technology. The complete circuitry is miniaturised and fits into the sensor head. This technical achievement cuts the price in half compared to all measurement systems without integrated transmitter technology. KROHNE is the only company who offers a real open standard without additional external transmitter and with a direct connection via standardised fieldbus from the sensor to the process control system. The SMARTPAT sensor stores all data and sends these as bidirectional digital signals with 4...20 mA / HART® 7 protocol to the control and asset management systems, handhelds, PC and other peripherals.

 WPH webReady The pH/ORP on-line process controllers are designed for industrial, commercial, and municipal water treatment applications. The output configuration allows you to program up to four outputs in a variety of control modes. Select from on/off mechanical relays or pulse proportional control for direct connection to metering pumps. The easy-to-use menu format and pre-wired, pre-mounted panel system options make set-up and installation quick and simple. Integrated data logging is available to validate system performance. With a USB memory stick data and event logs that include electrode measurements, temperature and relay status can be extracted. Then download log files from the USB stick to a PC. Product features: Range of applications Select from pH or ORP measurements and from five output options. Use In-Range to control a solenoid valve to dump a batch treatment tank when measurement value is within limits, or program for Out-of-Range Alarm in waste treatment applica

17-4 PH®, a wrought compressed stainless steel powder, combines high strength and high hardness with excellent corrosion resistance, fracture toughness and heat treatment properties. When machined, 17-4 PH® produces long, gummy chips. While soft and ductile in an annealed condition, it is capable of high hardness properties with a single precipitation or aging treatment. Applications 17-4 PH® is ideal for manufacturing aircraft fittings, braces, chemical processing components, coupling, fasteners, gas turbines, gears, hydraulic actuators, jet engines, nuclear reactor parts, pump shafts, rocket and missile components, valve stems and wear rings. The physical properties of 17-4 PH® stainless steel make it weldable by common fusion and resistance techniques. Among members of the precipitation hardening class of stainless steels, 17-4 PH® has the best weldability.

SS 17/7 PH® is a precipitation hardenable stainless steel that is formable and also capable of meeting high strength requirements. It is utilized in applications that require both high strength and good corrosion resistance. The alloy is classified as semi-austenitic to distinguish the soft phase (austenite) available for ease of forming from the high strength phase (martensite) usually achieved by heat treatment. The alloy can be formed from the annealed temper but due to a rapid work hardening rate may not be deep drawn without intermediate annealing. It is joined by most arc and resistance methods used for stainless steel. It should not be fusion welded unless shielded by inert gas to prevent oxidation of aluminum.

SS 17/4 PH® is a precipitation hardenable Martensitic stainless steel with high strength, and good corrosion resistance. This makes it perfect for use in metal diaphragms, for both aerospace sensors and burst discs. It is easily heat treated from the annealed temper. The corrosion resistance of the alloy is comparable to SS 302. It is heat treated at 900° F/1 Hour for highest strength. Other thermal treatments can be utilized to provide greater toughness and improved formability. Joining of the alloy is accomplished by the usual methods that are effective for stainless steel. Available Sizes: SS 17/4 PH® is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) and widths up to 12.0” (304.8 mm). The material conforms to AMS 5604, ASTM A693 and UNS S17400.