Parts for sensors - Import export

These are the pin ring made by stainless steel,which is the accessories used for sensor.

The IST AG FS2 flow sensors are applicable in gas and offer excellent long-term stability. In addition to measuring flow rates, the FS2 gas flow sensor is able to detect flow direction with outstanding sensitivity. Further advantages of the FS2 thermal mass flow sensor include: — Simple signal processing — Simple calibration — Bare sensor resists up to +450 °C (customer specific) — Stable platinum technology — Excellent reproducibility — No moving mechanical parts — Customer-specific sensor available upon request The IST AG FS2 flow sensors are optimal for measuring gas flow and direction.

The inductive coupler of the NIC series is designed for contactless bidirectional transmission of power and data. The devices consist of two components, the primary part NICP and the secondary part NICS. The primary part supplies the secondary part with power via the air interface. In return the secondary part provides data to the connected sensors and actuators.

We at TFP use our special wire and fiber laying technology to create sensors for large dimensions to measure pressure, humidity and monitor structural composite parts. Please contact us for further information.

This torque sensor is qualified for static and dynamic measurements on non-rotary applications. Further the measurement of reaction torques on rotating machine parts is possible. Especially the torque sensors with flanges are preferred. They are mounted between motor and stator, e.g. in agitator drives. This enables a maintenancefree torque measurement. For individual measuring tasks the design of our torque sensors can be adapted to the customer’s installation conditions. More application examples: Test structures in the field of precision mechanics Determination of friction torques Acquisition of breakage moments on screw caps The design has been optimized regarding overall length, weight and volume, so that axial forces up to relatively high limit values and bending moments of up to 20 % of the measuring range have only a small effect to the influence of the measuring element.

Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces. Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force. The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable.

Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces.

This high-precision torque sensor is designed for both static and dynamic measurements on non-rotating parts. The 10mm diameter throughhole can be used to feed parts such as cables or Bowden cables through the sensor. The mounting flanges contain threaded holes and through-holes so that the sensor can be fitted at either end. With no rotating parts, this sensor needs no maintenance when used correctly. The modular design of this strain-gage sensor allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function. With the USB option, in addition to the voltage output, the measurement function is available via USB as well.

This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications. Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings. With no rotating parts, this sensor needs no maintenance when used correctly. Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches. The strain-gauge based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque.

Development and construction of test systems for environmental simulation, i.e. climate and temperature tests as well as corrosion tests (e.g. MEMS testing and automotive durability tests on tilt sensors, inclination sensors, inertial sensors, inclination sensors, automotive parts and many more). - Adjustable humidity - Typical temperature ranges are -72 to + 120°C - Parallel testing and calibration of more than 100 DUTs simultaneously per test run - Various interfaces to the DUTs can be switched like CAN, LIN, Flexray etc. - Database connection and automated data analysis using Microsoft PowerBi can be added.

Sensors of the IFE family with a length of up to 900 mm are used to detect large metallic objects and offer a switching distance of up to 180 mm. The sensors are very robust, water-tight according to IP 68 and thus also suitable for outdoor use. The proximity switches are based on the proven inductive principle and switch con tactless when a metallic object moves close. Sensors of the family replace several inductive sensors connected in series. With their large sensor surface the reliably detect large moving metal parts. The sensors check for example the reinforcement in cast concrete parts during quality control or report the presence of railway rails for onward transport.

Sensors of the series HG are used for speed measurement, for example of gear wheels, under extreme conditions, high temperatures, humidity, contaminated or oily environment and mechanical stress. Based on the Hall sensor principle the sensor detects moving ferro-magnetic metal parts. EGE speed monitoring sensors can be modified based on your own ideas.

In addition to purely switching sensors, your sensor specialist EGE also offers you inductive proximity switches with analogue output for measuring tasks. The analogue signal is proportional to the approximation of the metal part. This sensor is also available in a version up to 160° C. The proximity sensor is based on the proven inductive principle: When metallic objects come close, the resonant circuit of a coil is dampened through induction and an analogue signal generated from it. Analogue inductive are e.g. suitable for the double occupation control of metal plates, for the tensioning control of wire or for monitoring metallic brake pads.

Spare parts kit. Optional spares kit are offered. Spare parts kit for 1st necessity, including one High Pressure valve of each type, a complete set of gasket and specific electrical device, sensors… Spare parts kit for 1st maintenance. Special tools. Transport & logisitics : Trucking, sea freight, FCA , FOB, CIF any optional prices following to INCOTERMS 2010. Packings. Packings are specifically engineered and prepared to suit a long-lasting protection of the compressor and its equipment throughout overseas shipping or simply road trucking. Packing consists of : thermo-welded protections to seaworthy wooden crate 4C, also preparation for container : ‘stuffing-lashing-securing’ – 40’’ High Cube and 20’’ Dry containers… Start up and commissioning. Installation & mounting supervising ,commissioning and training. Prior to all start up a commissioning PiCK list and commissioning preparation check list is communicated in order to facilitate the off-loading and positioning of the..

PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow ultrasonic - as a replacement for the current and widely used standard measuring variant with impeller, turbine or vortex - now makes contactless measurement according to the ultrasonic principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. Alternatively, the mechanical flow measurement according to the differential pressure principle is available with the proflow mechanical. Easy to integrate in machines and plant lines 4 or 6 x consumer channels (forward/return) 1/2“ With LED-display on fl ow sensor Temperature measurement PT 1.000 Big RED/GREEN Status LED 1 x main connection 1“ Flow rate each channel 1 ... 30 l/min (no „overload-risk“-> 60 l/min possible]) Operating temperature: 0 ...120 °C

PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND NEARLY MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow mechanical - as a replacement for the current and widely used standard measuring variant with impeller or turbine - now makes mechanical measurement according to the differential pressure principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. A completely non-contact flow measurement based on the ultrasonic principle is available with the proflow ultrasonic. Robust flow measurement in consumer return line PT 1.000 temperature measurement in consumer return line 6 x 2 consumer channels 3/4“ female screw thread 1 x 2 main connection 1“ female screw thread Available in three temperature variants: operating temperature up to 100°C, up to 160°C and up to 180°C Max. flow rate each channel:: 25 l/min or 50 l/min

RC-SPC1K is an thick film technology rain sensor. This device is realized in Allumina (AL2O3) substrate, this material is endowed a big reliability from an electrical thermal point of view. The sensor consists of three parts : 1) Capacitive sensor (Face A) 2) Heater generator 3) Temperature Sensor The Face A is the sensitivity area (capacitiver sensor) this area is exposted to natural agent (rain); In dry condition the value of the capacitor is nominal 100pF, In presence of the rain the capacitance goes to high valued respect the dry contidion; The ratio changing is over 420%, in the table N.1 you can verify the capacitance change characteristics. On Face B is present the heating circuit the temperature sensor (NTC component) and the connection interface (six pads).

The BL 45A/F barriers are from the technology of the BL 4x range and are associated with accessories recommended by the French Tunnels Study Centre (CETU). The BL 45A/F barriers are particularly suited to securing roads such as bridges, tunnels, crossings, mountain passes, etc. Main benefits: Closing off wide lanes Low maintenance costs Investment for long life cycle Pivoting base The pivoting base positions the barrier parallel to traffic lanes to facilitate drive and periodic tests without affecting traffic. This device also limits damages caused by a slight shock by freeing the barrier's rotation via the failure of an adapted part. Position sensors indicate the housing position. Automatic locking The boom remains locked in the open position thanks to a robust mechanical system allowing a firm locking of the arm. This functionality guarantees that the boom is held in the open position even in strong winds. Applications: Traffic management Bridges and tunnels

The desktop laser welding machine delivers with 50 watts good beam power and is characterized by its uniform, powerful, yet soft welding behaviour. The manual welding laser VL 50 has a very spacious working chamber and allows to weld precious metals such as silver and gold due to its powerful laser behaviour. Longer concentrated work is easily possible thanks to the ergonomically designed housing with the well thought-out arrangement of keyboard, display and joystick. The desktop laser VL 50 is a valued tool in the manufacture and repair of dentures and jewelry, in welding on precision parts, medical technology components and sensors, but also when applying materials to small molds.

The iGRAIN CO2 Sniffer Cable detects any infestation activity like insects, fungi, mites etc immediately when the activity starts. The increased use of Phosphine fumigation and with longer exposure times is damaging for all types of CO2 and moisture sensors because Phosphine (PH2) is a very aggressive gas. For a long time, there has been a demand for a technology that copes with this issue. iGRAIN has developed a sensor that comes with this challenge, so fumigation is not spoiling the sensors. <b>Advantages</b> • Earliest possible infestation warning • iGRAIN Risk Factor classification of each silo (0-6) • Quantifies the level of infestation in the entire silo • Efficient to avoid Aflatoxins, Mycotoxins and Fumonisins • Connects with the iGRAIN Smart App • Alerts about insects and fungi in the daily report • Only one sensor cable is needed per silo • Part of the AIO family of sensor cables

Product handling for randomly fed parts requires a recognition of the position and orientation of each single part. Depending on the application, vision sensors with integrated processor or networked cameras with centralized processor can be used. Demanding algorithms for inspection, sorting and grading require the recognition of additional product characteristics for each single part. Critical and validated applications in the medical, pharmaceutical or semiconductor industry may even require multiple inspections or advanced data matching with an external data base. VELTRU specifies a simple minimal standard interface for machine vision to allow integrating any vision system. This interface makes use of the existing calibration routines to determine the sensor location relative to the robot and to communicate product location and orientation on a conveyor belt. The VELTRU V10 Vision Connection is a tight integration for the Matrox Design Assistant, a flow chart based configuration to

Ceramic components offer significant advantages over metal and plastic parts . They have a dimensional stability at high temperatures. They are good electrical insulators. They do not outgas in vacuum environment. Ceramics are inert materials and resistant to many gases and chemicals. They show high thermal insulating properties or high thermal dissipation. Applications and products Advanced ceramics are used in solid-state lasers (Nd-Yag..), gas lasers, fibre lasers, diode lasers, high-power laser diodes, IPL, as well as in optoelectronic devices - optical optical sensors / imaging, infra-red detectors... Typical customized products from Microcertec are electrical insulators resistant to gas corrosion and plasma discharges, reflectors, heat sinks, 3D metallized sensor carriers, structural parts than can be brazed, sensor holders.

Manufacture of basic parts, pieces for instruments, sensors and manometers.

Manufacture by machining is battling against the rising cost of materials and long machining times. That's why many companies are finding our forming process for hollow parts of increasing interest. We have other forming options for machine-finishing in-house. Our cold-forming process is distinctive – including for thin-walled hollow parts because of: rolled (chip-free manufacture) external threads suitable surfaces for maximum corrosion requirements Some examples of Conform® hollow parts and nuts: sensor housing union nuts for hydraulic, brake and fuel lines clinch nuts