Panel supplies - Import export

Powering and controlling the motors within the system is done via MCC panels. Contains equipment required for MCC panels, main supply units and remote control. It also has the necessary communication infrastructure for PLC, central automation and SCADA systems. The system automatically protects the motors and all electrical equipment in the field against excessive voltage drops and rises.

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

The infrared heating panel TIH 900 S supplied in TÜV-tested quality comes with all the references to be expected of a branded heating panel. This includes i.a. the efficient heating procedure with environmentally sound IR-C radiation, where 100 % of the electrical energy input is converted into heat output. Moreover, the TIH 900 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.

The BaCo 1800 is a fully automated foil application and sealing machine, suitable for plastic, tin or glass containers. mobile base frame feed conveyor with feed control synchronised star wheel stand with receptacles for the containers as form parts adjustable outer ring for guiding containers through the machine sequence foil magazine for stackable pre-cut Ballerstaedt seals pneumatically driven foil dispenser with a precise, maintenance free 180° reverse gear for removing the seals from the magazine, applying them to the sealing edge and fixing them with a pre-sealer sealing station for closing the containers with regulation of the sealing temperature, pressure and time for optimal setting of the seal parameters, conductive, optional also inductive exit conveyor for the containers central height adjustment of the magazine plate to adjust it to the respective container height all-over protective coating control panel with electrical supply unit

oHeterogeneous flooring manufactured in rolls (LINO FATRA®) is designed mainly for residential and commercial buildings, schools, hospitals, and light industry buildings. Luxury vinyl floorings in board form are manufactured (product lines FATRA THERMOFIX® and IMPERIO®), which are used mainly in residential and commercial buildings. oHomogeneous flooring (LINO FATRA®) is supplied in panels with their design may include special conductive features. They are used mainly in operating theatres, laboratories, and computer classrooms. oFloating vinyl floor (product lines FATRA RS-CLICK and FATRACLICK®) is supplied as boards with the patented Uniclic® system and designed mainly for residential buildings and family houses.

It consists of a front panel and one back supplied in layers Level IIA II IIIA KEVLAR 129 ht and with fabric cover. Ballistic panel material Kevlar 129 HT - Kevlar XP - golf flex - dyneema. The Police XP model is extremely light and easily concealable. The excellent vest wearability, which makes the article suitable for all body types is secured by two side elastic flaps and two on the shoulders; the fins allow one. Velcro adjustment of 18 cm on the front e 11 cm on the shoulders, in addition to their natural extension. Used in all operational situations

It consists of a front panel and one back supplied in layers Level IIA II IIIA KEVLAR 129 ht and with fabric cover. Ballistic panel material Kevlar 129 HT - Kevlar XP - golf flex - dyneema. The Police XP model is extremely light and easily concealable. Each panel is contained in a fabric lining suitable to protect from rays ultraviolet within the band of spectrum of 2,200 Armstrong. The outer lining is made of fabric 65% polyester 35% cotton, or CORDURA®. Anti-crease and easily washable, this one feature comes from the ability to remove ballistic panels.

CREATE A MODERN MINIMALIST LOOK WITH YOUR CHIANTI WETROOM SCREEN. THESE STYLISH GLASS PANELS ARE SUPPLIED WITH A CHROME STABILISING BAR SO YOU CAN DESIGN A WETROOM SPACE TO THE EXACT DIMENSIONS YOU REQUIRE. ALL 2M HIGH WITH 8MM CLEAR GLASS OR WITH OPAQUE CENTREPIECE (80CM). AVAILABLE IN LARGE QUANTITY OF DIMENSIONS FROM 30CM (CLEAR GLASS ONLY) TO 160CM. ALSO AVAILABLE ARE RETURN PANELS 30CM AND 45CM, FIXED OR ROTATING IN CLEAR GLASS ONLY. YOU WILL NOT BEAT THE QUALITY OF OUR CHIANTI WETROOM PANELS WHICH CAN BE INSTALLED ON WETROOM FLOORS OR SHOWER TRAYS. EACH PANEL HAS AN ALUMINIUM FLOOR PROTECTOR STRIP ON BOTTOM OF GLASS ALSO INCLUDED AS STANDARD.

Central cooling systems are designed units to use for the removing of thermal loads which are pointed at more than one cooling point. The system will have the appropriate capacity depending on the desired power designed in the same or different capacities of compressors. Electric power supply and control panel are on the unit, and all connections are made in the factory. Scrolling, hermetic, semihermetic varieties of central system are available. Semihermetic or screw compressors are used in the central system for the center of industrial plants with high cooling capacity. Hermetic and scroll compressors are used to lower capacity the projects. Leakage tests of outdoor unit are performed by pressing nitrogen. Electrical panel and all automatic control elements are shipped as ready for assembly. It is manufactured in accordance with European Union norms and CE certificate.

Includes a wide range of Open Frame monitors and industrial Touch Monitors for many different applications and markets. Custom monitors and touchscreen monitors are also available, to give you the optimum solution. These Open frame industrial Monitors including ‘chassis’ and panel mount monitors offer great benefits such as; 6.5″ to 84″ available with up to 4K resolution. Long term stability of mechanical design with VGA, DVI, HDMI, Video interfaces Various built in Touchscreen options with RS232 / USB communication optional (for touch) Excellent design to optimise air flow / heat dissipation, and minimal footprint with fine finishing with good looking black powder coated chassis (option) Standard VESA mounting monitors Some larger panels have SMPS (power supply) built in for your ease of design-In. CDS’s Daylight Readable (sunlight readable) Open Frame Monitors are an excellent solution for manufacturers or integrators, looking for a quick and easy installation

Period of use: 100.000 hours Low energy consumption Easy installation Low voltage power supply available Stable light, not affected by voltage variations Housing made of extruded aluminum, for proper thermal management The light fixture consists of: 1 pc. clear diffuser, poly-carbonate or glass (for high temperatures and resistance to chemical environments) 1 pc. Aluminum encasement Optical assembly Fixing system The interior houses an optical block made up an aluminum support and LED(s) All external elements are powder-coated in Airport Yellow – RAL 1004 Electrical Characteristics Electrical insulation class: I Power supply (XXX): 230-110V AC, 12-24V or 48V DC Power consumption 3 W per LED If it is powered from Power Supply And Control Panel will have redundancy and alarming

Parking kiosk with a ramp is an innovative product of the company "ANITKOR" with a modern access control system. An innovative part that represents an independent power supply via solar panels located on the canopy of the kiosk. Kiosk is a product intended for all needs of parking space records. During the development, it is possible to specifically define the dedicated parts of the functionality of the kiosk and the record system in proportion to the needs of the client. The company "ANTIKOR" is constantly striving for an innovative approach to self-sustaining systems that allow complete autonomy and independence from the electricity grid in the form of solar panels.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

TYP A 075 Cutting & Forming Machine for DIP Components Description The Streckfuss cutting and forming machine type A 075 is designed to cut and form the leads of dual in- line package components utilizing a tube- to- tube feeding configuration. The machine is able to process DIP's in a wide range of component sizes (from 7,62 mm up to 19,9 mm). The component leads are first formed to the desired lead span and then cutted to desirable length. The adjustment of lead span and cutting parameters can be preset and are displayed on a digital panel. The supply of components can only be done by the use of component tubes. An empty component tube picks up the processed components. The processing speed is infinitely variable. Up to 3.500 components can be processed within an hour. Components

AIC manufactures and supply PLC platforms, AC&DC drives panels suited to allow an enhanced power control of each equipment using all the drives available on the market, such as Rockwell Automation, ABB, Siemens, Nidec, Schneider, according to the customer needs/requirement. The power control supply includes: - AC Medium voltage panels suited with dedicated power transformers, up to 7MW; - Low voltage AC Drives: Single motor drives, Multidrives with DC Bus supplier; - Low voltage DC Drives; - Soft-starter for smooth acceleration; - MCC for fixed speed drive design; - AC & DC motor and gear motor basic & detailed design and supply.

Set 2250kVA Cummins Diesel Generators Engine Cummins QSK60-G4 Engine Alternator Stamford PI 734 F1 Alternator, 400/230 Volts, 3251 Amps, 50Hz Hours XP22502 - 186 XP22503 - 181 XP22504 - 206 XP22505 - 181 Control Panel Deep Sea DSE 5220 LED Display We can fit new deep sea control panels to allow all to synchronise at additional cost. Switchgear Generator & Mains Schneider Breaker 3200A 4 Pole ACB, Deep Sea 332 Transfer Panel and Supply Display Monitors. Transformers 2000kVA, 50Hz, 3 Phase, 11000 V to 417 V transformers. Weighing 4000Kg each, manufactured 2009. Available as a package including transformers and switchgears. Generators sold individually come with a switchgear. Ex Datacentre standby sets with Cummins Engine Manuals, Stamford Alternator Manuals, Factory test reports, CE Certification, Commissioning certification and Test reports.

Our factory is offering high quality fence panels for gardens, constructions, fields and farming.The eyeholes are 5*15 cm and tchikness is 4mm. Our products are manufactured according to Europeand standards and having ISO and CE certificates as well.

USE : Check the Torque of the coachscrews, the Fishbolts and the Rail-Bolts. ADVANTAGES : Very accurate and reliable. - Measurement Capacity 16 - 80 daN/m - Total Length = 1.18 m - Net Weight = 4.2 Kg - Square Bit Drive = 19.05 mm - Delivered in Wooden Case ( Weight with Case = 6.2 Kg ) - Reference : CDY * Sockets with 19.05 mm Square Bit Drive - See the Supply Accessories Panel.

SmartCity Bin 120 is a street waste compacting bin with fill-level measurement system, operating on sustainable solar power. It is an automatic urban trash container for outdoor use, supplied with solar panel, built-in compactor, fill-level measurement system based on innovative algorithm Equipped with air pressure, humidity, temperature and air quality sensors. Galvanized steel vandalproof housing, separate locks on each door, hands safety sensor and fire detection system with smart firefight algorithm stand for high safety standards. Stylish NB-IoT automatic garbage bins, supplied with advanced controlling and energy safe algorithms and real time data transfer – the face of smart city street landscape!

1.Carrier lower base profile base surface width is 117 mm. 2.Lower carrier profile vertical height are 9 and 14 mm with two alternatives and Water inclined has at 14 mm height threshold profile. 3.At case and side profile junction there is no plastic injection. Alluminium profiles are linked to each other with screws in order to provide uninterrupted conjuction. 4.Above glass panels; there is no additional panels. Centering is supplied thanks to component that is mounted inside upper case profile . 5.Balanced and without flexure operation is provided by courtesy of carrier channel located at lower rail profile. 6.There is no need any additional component or application under favour of first wing profiles are handler itself. 7.Center channel is existed at wing profile as moving profile in order to prevent axial leakage. Additionally; intersection between glass and aluminium the wing profile is specially designed in order to prevent glass leakage.