Results for
ROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Powder and Wet paint equipment must be determined and selected carefully according to the properties of the parts to be painted. In our systems, we use the highest quality, most efficient and most reliable, manual and automatic powder and wet paint guns, single and multi-axis robots.
Request for a quoteADLER-WERK LACKFABRIK JOHANN BERGHOFER GMBH & CO KG
Austria
The front door not only acts as an important architectural design element, however, but is also expected to offer protection against the wind and weather. Heat, cold, damp and UV radiation from the sun, as well as wood-destroying fungi, are constant sources of stress for front doors. Under these aspects, ADLER has developed a highly technological and particularly resistant painting system. The new all-round improved Aquawood Protor System has allowed new standards to be set in the front door coating sector. The new generation boasts extraordinary scratch resistance, even greater hardness, excellent economy and more efficient drying. With Aquawood Protor, ADLER provides an innovative system, which meets the highest quality demands, whilst being easier to process and reducing material costs – ALL IN ONE. In the case of this system too, ADLER naturally builds on decades of experience in the research and development of water-thinnable surface coatings.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION • White fine grain repair filler for interior and exterior use • Does not shrink • High resin content • FINEX SYSTEM is a multi-purpose filler, which allows to fill holes and cracks, and to repair windowsills and damaged angles ACCEPTED SUBSTRATES Cement, concrete, bricks, concrete blocks, stone, aerated concrete, plaster, old paint, old tiling. SUITABLE SURFACES Once completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.
Request for a quotePERGEL METAL
Turkey
The paint plant is especially preferred in the construction and furniture industry. The materials used in this sector are painted both for aesthetic purposes and for protection purposes. Paint plants is a far-reaching term. There are varieties. Its quality and form vary. In general, the age paint plant is more preferable. There is a wet paint booth, conveyor system and drying oven in the paint plant. It is produced in accordance with the most suitable conditions and made suitable for use.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection Also available as spray version OKS 3571 MOSH/MOAH-free
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Dry lubrication for applications where pastes or powders have been used up until now Chain lubrication of heavily loaded chains in temperature ranges in which oil or grease lubrication is not possible For example, in annealing, stoving and baking ovens for aluminium tube manufacturing, in painting systems or in baking lines Advantages and benefits Hygienically harmless as defined in German LFGB Approved by Nuremberg LGA for use in food processing technology NSF H2 registered Economical due to low consumption Optimum wear protection at high pressures and extreme temperatures Can be mixed with water in ratio of up to 1:5
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Novelis products are renowned for their use in building and construction, but our aluminum also can help ensure the efficiency of buildings and maintain the comfort of those inside. Novelis aluminum is flexible but strong, stylish but practical – characteristics that make it ideal for construction of roller shutters, sunbreakers and windows. Exposed to the harshest conditions, our pre-painted rolled aluminum can withstand mother nature’s worst yet retain its ease of use and like-new aesthetics for years to come. Novelis SP80 is the name of a particularly abrasion-resistant paint system for roller shutter slats based on polyamide-treated premium polyurethane.
Request for a quoteIFA TECHNOLOGY GMBH
Germany
IFA Technology considers your individual requirements and builds customised plants and systems for the paint industry and the varnish industry. Our plants and systems for dosing liquids and solids in the paint and varnish industry offer high dosing accuracy and perfect reproducibility. We meet the high demands of our customers through the use of high-quality materials and precise workmanship. Application of plants and systems for the paint industry and the varnish industry: Storage, mixing, dosing and application of paints and varnishes Special dosing valves and dosing pumps for paints and varnishes
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
LMF JDN Low Headroom Trolleys The trolley for areas where headroom is restricted Carrying capacities: from 0,5 t up to 6,3 t When only very low headroom is available we recommend the JDN-Ultra-Low Monorail Hoists. Standard Features State of the art by using JDN Air Hoists PROFI TI as well as a new driving motor Low-maintenance and low-wear operation of the motors by means of a reduction of components No additional motor lubrication required 2-step travelling speed Changeable track width * Advantages Able to negotiate curves Longer cross beams to improve the minimum headroom even with bulky loads Options Rack and pinion drive Spark-resistant package Offshore paint Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose Hose trolleys * Please contact us.
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
PROFI 6 TI LM JDN Trolleys Carrying capacities: up to 20 t as manual trolleys (LN) for pushing or pulling the trolleys by hand as reel chain trolleys (LH) for moving the trolleys by unwinding the reel chain as motorised trolleys (LM) powered by an air motor Standard Features easy to install with anti-climb and anti-drop devices robust and with little maintenance able to negotiate curves Options Rack and pinion drive 1 Spark-resistant package 2 Offshore paint 2 Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose 1) From LM 3.2t upwards 2) Not available for LN 1t
Request for a quoteSALT CAM
Turkey
The mirrors are materials which are used widely and illuminate the places, provide extended, higher, deeper and enhanced areas with their illuminating features at the same time. The technical achievements of the mirror applications which are applied through optic illusions are crucial to provide persistency and integrity for the decorative purposes demanded. Flotal is the brand of mirrors of the Şişecam Float Glasses. They are produced with the Float Glasses which are the glasses with finest quality of the world. The float glasses complete the washing, shining, silver plating, copper plating, painting with two-layered covering systems and drying phases through full automatic production system and become flotal mirrors. The Flotal Security Mirrors which are produced by covering the back sides of the flotal mirrors with the safety films do not scattered in any circumstance, and even though they scattered, they do not fall into.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, joints, clamping and drying frames or slideways at temperatures up to 280°C For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Reduction of the friction coefficients and increase in the wear protection through additives suitable for high temperatures Long period of use through high oxidation stability Clean chains without deposits (no cracking residues) Extended relubrication intervals through low evaporation losses
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation
Request for a quoteGRÜNING & LOSKE GMBH
Germany
lastic and strong adhesive and sealant on polyurethane (PUR) basis. For bondings and sealings on metals, many plastics, ceramic, wood, glass, stone, etc.. Applications: Tank and apparatus construction, Car body, freight container and vehicle construction, Ventilation and air conditioning, Pipeline and fittings construction, Energy and electrical industry, Insulating technology and in many areas of plastic technology and wherever silicone is not suitable. Properties: Can be painted over and sanded after curing, Odourless curing, Resistant to weathering and UV, Excellent aging resistance, Resistant to fresh water and saltwater, Stable, pasty and Silicone-free. A better adhesion is achieved by using suitable WEICON adhesion agents. With suitable paint coating systems (except alkyd resin paints). Available in white, grey and black.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, hinges, joints, clamping and drying frames, and slideways at higher temperatures For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Non-contaminating liquid lubricant for higher temperatures Highly effective due to optimum wear protection, outstanding oxidation behaviour and good creep properties Absolutely resistant to water and steam, inert with respect to acidic media Outstanding adhesion and lubrication effect with no tendency to drip and no formation of hard residues For best results clean the cold surface, first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. Apply sufficient amount onto the lubrication areas with brush, dip oiler, dipping or suitable automatic lubrication systems. Let excess drip off and let product affect before the beginning of operation. Instructions of the machine manufacturer have to be considered. Relubrication period and amount should be stated
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of friction and rolling bearings, chains, joints or slideways at higher temperatures For conveying systems under radiation heat in painting, stoving and drying systems, travelling grates in firing systems Dry lubrication at temperatures above 200°C Lubrication of elastomers and plastics not resistant to mineral oil Advantages and benefits Highly suitable as a high-temperature lubricant Very effective due to finest, homogeneous MoS₂ distribution in the oil Resistant to water and many chemicals, fuels, lubricants and hydraulic oils For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. If at all possible, avoid excess. Observe the machine manufacturer's instructions. Assess the lubrication frequency
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
In addition to the product range of classic cold rolling mills, we can also offer our customers electrolytically galvanized strip. The zinc coating offers excellent corrosion protection: In cooperation with our customers, we have developed a product that solves the problem of zinc abrasion in the processing of galvanized strips - ZPL (Zinc Plus Paint). An organic coating system is applied immediately after electrolytic galvanizing. This results in a colourless, uniform, highly lubricious layer with a dry film thickness of 0.50 - 3.00 µm, which can of course also be supplied in any desired colour. ZPL offers the following advantages: Further improvement of corrosion protection Excellent sliding properties, preventing zinc abrasion in the tool Reduced tool wear Longer tool life Oil-free processing is made possible Coating and printable layer with "Anti Finger Print" properties
Request for a quoteMICRO-EPSILON
Germany
reflectCONTROL Automotive enables the fully automatic inspection of painted car bodies. The robotic systems enable the detection, three-dimensional measurement and classification of typical paint defects such as inclusions, craters, runners, etc. This enables robot-based automatic processing of the defects, up-stream analysis to identify the sources of defects, and laser-based marking for possible manual processing of the defects. The reflectCONTROL systems consist of sensor, robot, computer and software and interface package. Depending on the requirements, different versions of the system are available, which are configured depending on the customer's needs. The number of reflectCONTROL sensors and robots required can be flexibly adapted to the required throughput.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation Also available as spray version OKS 3541 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir/shake well before use. Apply OKS 354 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate
Request for a quoteMIKROPOR
Turkey
Energy consumption, one of the basic cost items, constitutes approximately 80% of total filtration costs. Because of this high rate, using an air filter with high energy efficiency provides cost-saving and also reduces the amount of waste, since the replacement frequency is decreased. An invariable method is used in order to evaluate the energy efficiency of G4, M5, M6, F7, F8, and F9 class filters, and products in which this method is implemented are indicated with Eurovent 4/11 certificate located thereon. Our Eurovent certified products protect your health and the environment while allowing you to save money. We offer a complete range of air filters suitable for a modern-day painting system. These systems require either a constant fresh and particle-free air or recirculated air without VOC. Because of our worldwide experience, we supply ultimate filtration solutions for HVAC and HT applications to well-known automotive manufacturers.
Request for a quoteMASSAN METAL
Turkey
Stainless Bistro table legs that are produced in molding injection machines and carefully painted with electrostatic powder coating system, are ideal products for your indoor/outdoor venues, hotels, restaurants, cafe/bars with their different colors, adjustable pingo system and unique appearance.
Request for a quoteARI METAL
Turkey
13 LT Office Mesh Waste bin. Paint system is electro static powder coated. Can be paint other colors according to the demands. Paint powder quality is first class quality.
Request for a quote4CR INTERNATIONAL GMBH
Germany
Hard cup and collars support liners for the paint preparation system, saves you valuable time, less cleaning up after painting, all-in-one solution reduces outside contamination and reduces paint consumption. No Problems when spraying at 90°.
4CR INTERNATIONAL GMBH
Germany
Hard cup and collars support liners for the paint preparation system, saves you valuable time, less cleaning up after painting, all-in-one solution reduces outside contamination and reduces paint consumption. No Problems when spraying at 90°.
BDA GLOBAL TRADING
Turkey
AGL Systems Pavement Chemicals ATC Flight Consoles Aircraft Arresting System Aircraft Docking System Dock Leveller Jet Blast Deflector Cargo Equipments Paint Booth Aircraft Parking Shades Systems Barriers & Road Blocker Security System CCTV & Broadcast Systems
Request for a quoteROSSOFUOCO SRL
Italy
The versatile solution of two types of cooking: direct, indirect or both. The fire can be lit directly in the brazier inside the cooking chamber, or in the combustion chamber below. By inserting a grill into the cooking chamber itself, a second surface is obtained for the simultaneous insertion of multiple trays. The fire can therefore be lit directly in the cooking chamber or in the separate combustion chamber or simultaneously in both depending on preference, with the advantage of keeping, in the latter case, the hob hotter for longer.Black painted structure – Double combustion system – Glass on cooking and combustion chamber doors Kit of shovels and shovel holders and stainless steel side worktop.
Request for a quoteResults for
Painting system - Import exportNumber of results
103 ProductsCountries
Company type
Category