Padding - Import export

PADS WITH RELIEF CUT

PADS WITH PAD PRINTING SIZE

Universal Damping Plates Natural frequency 12 Hz to 50 Hz Load range 0.002 N/mm 2 to 0.5 N/mm 2 Universally applicable and custom manufactured: ACE supplies cushioning pads in the SL-170 to SL-720 range under its brand name SLAB. These universally applicable absorbers are made from highly cushionable elastic PUR materials. The 12.5 mm or 25 mm thick plates can be supplied with a density of 170 kg/m 3 to 720 kg/m 3 provide made-to-measure vibration isolation. They can be combined as isolation packages and custom-made to suit requirements, using water-jet cutting. Other made-to-measure options from ACE include on-site vibration measurement and product selection, a special sizing software package, and cost-neutral design.

Universal Damping Plates Natural frequency 12 Hz to 50 Hz Load range 0.002 N/mm 2 to 0.5 N/mm 2 Universally applicable and custom manufactured: ACE supplies cushioning pads in the SL-170 to SL-720 range under its brand name SLAB. These universally applicable absorbers are made from highly cushionable elastic PUR materials. The 12.5 mm or 25 mm thick plates can be supplied with a density of 170 kg/m 3 to 720 kg/m 3 provide made-to-measure vibration isolation. They can be combined as isolation packages and custom-made to suit requirements, using water-jet cutting. Other made-to-measure options from ACE include on-site vibration measurement and product selection, a special sizing software package, and cost-neutral design.

Universal Damping Plates Natural frequency 12 Hz to 50 Hz Load range 0.002 N/mm 2 to 0.5 N/mm 2 Universally applicable and custom manufactured: ACE supplies cushioning pads in the SL-170 to SL-720 range under its brand name SLAB. These universally applicable absorbers are made from highly cushionable elastic PUR materials. The 12.5 mm or 25 mm thick plates can be supplied with a density of 170 kg/m 3 to 720 kg/m 3 provide made-to-measure vibration isolation. They can be combined as isolation packages and custom-made to suit requirements, using water-jet cutting. Other made-to-measure options from ACE include on-site vibration measurement and product selection, a special sizing software package, and cost-neutral design.

Confectioning and Combinable Energy capacity max. 15.0 Nm/cycle Stroke 6.5 mm Tailor made damping material in pad format: SLAB damping pads are made of a viscoelastic PUR-material. They absorb impact loads extremely effectively and are also suitable for insulating or damping vibration. The pad series SL-030 to SL-300 are quickly adapted to the relevant type of application. This is in part achieved through the configuration of the calculating tool or directly by the ACE specialist engineers. Furthermore, this is possible because the standard material can be cut exactly and quickly to any customer requirement with our new cutting system. It is also possible to obtain a sample to find an optimum solution.

Confectioning and Combinable Energy capacity max. 6.7 Nm/cycle Stroke 12.5 mm Tailor made damping material in pad format: SLAB damping pads are made of a viscoelastic PUR-material. They absorb impact loads extremely effectively and are also suitable for insulating or damping vibration. The pad series SL-030 to SL-300 are quickly adapted to the relevant type of application. This is in part achieved through the configuration of the calculating tool or directly by the ACE specialist engineers. Furthermore, this is possible because the standard material can be cut exactly and quickly to any customer requirement with our new cutting system. It is also possible to obtain a sample to find an optimum solution.

Confectioning and Combinable Energy capacity max. 3.1 Nm/cycle Stroke 6.5 mm Tailor made damping material in pad format: SLAB damping pads are made of a viscoelastic PUR-material. They absorb impact loads extremely effectively and are also suitable for insulating or damping vibration. The pad series SL-030 to SL-300 are quickly adapted to the relevant type of application. This is in part achieved through the configuration of the calculating tool or directly by the ACE specialist engineers. Furthermore, this is possible because the standard material can be cut exactly and quickly to any customer requirement with our new cutting system. It is also possible to obtain a sample to find an optimum solution.

Elastomeric bearings consisting of a solid block of vulcanised elastomer without internal cavities are called plain pads. Plain pads are economical efficient support for precast and pre-stressed concrete or steel beams in bridges and buildings. These pads are designed according to required standards and shear modulus of the manufactured elastomer may vary between 0.6-1.35 MPa to meet the customers need.

The Valex elastomeric pads are designed for the elastic fastening of overhead crane rails. The Valex elastomeric pads, when used with Valex series clips, greatly reduce vibration and consequent rail wear. They lead to a uniform distribution of the loads over the supporting structure. The use of elastomeric padding is particularly advisable where: • the rails are subject to difficult working conditions, • the rails are subject to very large vertical or lateral loads, • the rails are exposed to weathering, • noise and vibrations are to be reduced to a minimum.

Disk brake pads for commercial vehicles. ECE R90 approved. Applicability: Mercedes, DAF, MAN, Scania, Iveco etc. Braking system: Knorr SB 7 WVA: 29059, 29061, 29087, 29108, 29163, 29179, 29202, 29201, 29105

Product introduction: 1.During the period of pregnancy and lactation,most of mothers are easy to leak milk. Breast pads help to absorb milk preventing leakage and keep the breast dry. 2.Replace after feeding or pumping session to reduce skin irritation risk and minimize sour milk odor. Product Function: 1.Secure day and night; 2.Feel dry even with heavy milk flowing; 3. Keep skin soft and safe; 4.Tapes keep pad without any moving; Main materials: 1.Fluff pulp+SAP(Jel); 2.Non-woven fabric; 3.Tissue paper; 4.Breathable waterproof film; 5.Adhesive tape; 6.Release paper; Main Design 1.Unique leakage on sides; 2.Special absorbent core; 3.Additional leakage barriers; 4.Secure hold firmly; 5. 3D design makes fit perfectly

1) High quality non-woven fabrics as top layer is clean and dry. Cotton fabric feeling and soft 2) The absorbing layer is composed of fluff pulp coated by tissue paper and high polymer absorbing resin. High polymer absorbing resin can absorb liquid 100-150 times larger than its sap weight 3) The bottom film is high quality flow casting film, never leaking water. It effectively prevents clothing dirty due to liquid spilling and penetrating, and keeps the place around dry 4)Capable of absorbing urine and other liquid for many times, so as to keep pad surface dry and comfortable

Mailer / Envelope with embedded paper honeycomb pad. 100% made of kraft paper without any plastic. 100% recyclable and degradable. Embedded paper honeycomb pad to protect products to avoid damage during shipping. Customized size and illustrations are applicable

The rest pads can be used both as a stable and precise support and as a stop. The pin form of the rest pad also allows it to be used with components with constricted support points.

Version: Ground. Top face without centerbore. Note: Rest pads can also be used as feet for jigs and fixtures. Advantages: Cerazur is extremely impact and bend resistant. The basis of this material is zirconium oxide. It is a composite metal-ceramic material.

Hardened and ground. Top face without centerbore. Note: If more than one rest pad is used, the support height can be reground. Rest pads can also be used as feet for jigs and fixtures.

Self-aligning pads are used to support and clamp unmachined and machined workpieces. They also serve as stops, supports and thrust pads in fixtures and toolmaking. Ball secured against rotation. Form O: The abrasive diamond surface is bonded firmly to the ball. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads. Advantages: The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement.

Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. Form K white. Form E hardened, bright. Form O diamond impregnated surface comparable to 100 grade abrasive grit. Form P polyurethane surface, hardness 60 Shore. Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. In addition, they serve as stops, supports and thrust pads in fixtures and toolmaking. The ball can be removed from the housing by applying light pressure to the socket head screw. Ball secured against rotation. Advantages: Highly cost-effective as inserts can be exchanged. The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement. Drawing reference: Form C: flattened steel insert, smooth Form E: flattened stainless steel insert, smooth Form F: gripper face Form K: flattened POM insert, smooth

Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Note: Self-aligning pads serve as stops, supports and thrust pads in fixture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with male thread, flattened ball, smooth. Form D: with male thread, flattened ball, with POM insert. Form F: with male thread, flattened ball, diamond grip. Form M: with male thread, flattened ball, with carbide insert. Form G: press fit, flattened ball, smooth. Form H: press fit, flattened ball, with POM insert. Form J: press fit, flattened ball, diamond grip. Form K: press fit, flattened ball, with carbide insert.