Packing machines - Import export

New packaging machine with transparent bell RP series with solid steel structure, the latest generation of electronic, front control interface, intuitive programming, more space in the packaging space and a whole host of technical features that enhance performance yet. Three models are available with a support surface of mm. 400x250x200h - mm. 520x390x250h - mm. 580x780x250h. The dimensions of the support surface are to be considered with the hood closed. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product.

Pail filling machine for 3 – 12 kg 2-lane machine Machine performance: 14 cycles/min. 28 pails/min. 1.680 pails/h Special features: 6 rotary piston filling pumps (4 x coarse dosing, 2 x precise dosing) Precise dosing by means of load cells Film bar with integrated sealing and super-heated steam Pressure cap station with automatic feeder

Used in products packed with machines. One box has one roll 50 cm 17 micron and 50 cm 23 micron are our standard products. Can be produced in different specifications and colours upon order.

This packing machin is used in the packaging sector because it allows of enveloped the clothes both in the superior part and in that inferior. The superior machine can welding both horizontal and tilted (--/. Today with this new model is possible the regulation pneumatically of the height of the inferior settling bar, finally finding an application in the laundry.

New pneumatic packing machine bar welding with pneumatic regulation of the height of the head for closing in low of the envelopes. Ideal for welding envelopes for different measures of clotes for more transport cleaning and sure.

LF-5K is a linear feeder for granular materials and some powder materials. The vibratory feeding mechanism achieves multi-stage feeding. The pneumatic cylinder drives fast discharging. LF-5K linear feeder has a wide weighing range with high speed and high precision, which can be widely used in quantitative packaging machinery of grain, feed, chemical, rubber, and plastic industries.

Profit Pack Machine Bypass Mode This option allows the Profit Pack product conveyor to continue to run, while bypassing the Sealer. Access through HMI. Profit Pack Complete Detection Beacons This option provides a complete detection four color LED beacon on the Erector that alerts operator. Top to bottom; Red burning - general failure, Orange blinking - low tape, Orange burning - out of tape or broken tape, Blue blinking - low blanks in magazine, Blue burning - magazine empty, Green burning - machine in standby. Detection on the Sealer; Orange blinking - low tape, Orange burning - out of tape or broken tape, Green burning - machine running or standby. Profit Pack Product Conveyor Height Adjustment Hydraulic height adjustment on Profit Pack product infeed conveyor between 39.36" - 47.25" (1000-1200mm). Infeed Product Conveyor Width 7.87" (200mm) Smooth Surface Belt Standard smooth surface belt with width of 7.87" (200mm). Infeed Product Conveyor Width 13.77" (350mm) Smooth Surface...

Profit Pack Machine Bypass Mode This option allows the Profit Pack product conveyor to continue to run, while bypassing the Sealer. Access through HMI. Profit Pack Complete Detection Beacons This option provides a complete detection four color LED beacon on the Erector that alerts operator. Top to bottom; Red burning - general failure, Orange blinking - low tape, Orange burning - out of tape or broken tape, Blue blinking - low blanks in magazine, Blue burning - magazine empty, Green burning - machine in standby. Detection on the Sealer; Orange blinking - low tape, Orange burning - out of tape or broken tape, Green burning - machine running or standby. Profit Pack Product Conveyor Height Adjustment Hydraulic height adjustment on Profit Pack product infeed conveyor between 39.36" - 47.25" (1000-1200mm). Infeed Product Conveyor Width 7.87" (200mm) Smooth Surface Belt Standard smooth surface belt with width of 7.87" (200mm). Infeed Product Conveyor Width 13.77" (350mm) Smooth Surface...

It is used to bag the granular and processed products in PP bags at high capacities

It is used to bag the granular and processed products in PP bags at high capacities

Our KMX 1000+ 60 silage baling machine has been designed for baling of beet pulp, corn silage and all other rough feed crops. According to the dryness rate and size of the grain particles the machine can bale 950-1000 kg. This machine can bale in 1 minute 1000kg and in 1 houre 60 tons approximately. The product has a positive role in making the life of farmers convinent and productive. Simultaniously the machine is capable of litter packing as well.

◾ Fully PLC controlled. ◾ Precision weighing and long life with stainless steel load cells. ◾ 5/10kg.-10/25kg.and 25/50kg. weighing December. ◾ Automatic filling into bags with an open mouth. ◾ Lower and upper tolerance values that can be programmed separately. ◾ Automatic sack shaking mechanics. ◾ Separate weighing container feeding system according to the type of product to be bagged. ◾ Double coil feeding driven by separate motor. ◾ Single coil feeding driven by two-speed motor. ◾ Belt feed driven by two-speed motor. ◾ According to the product to be bagged and the desired tolerance, 13-22 tons/hour (50 kg. capacity Decoupled in bags) between. ◾ Special system panel from IP54 protection class ◾ Regulation bunker weighing unit and special vibration units in unloading bunkers. ◾ Easy calibration with keypad. ◾ Height adjustable sewing machine column.

The high capacity packaging machine realizes sound and high extraction packaging. This is one of the most important machines in high-capacity factories. The capacity is up to 35-40 tons / hour.

The vertical vacuum packing machine is a specialized equipment used in packaging that removes air from a package or container, creating a vacuum environment. This equipment is commonly used across industries for preserving and extending the shelf life of perishable goods, protecting items from moisture and oxygen exposure, and maintaining product freshness.

◾ Fully PLC controlled. ◾ Precision weighing and long life with stainless steel load cells. ◾ 5/10kg.-10/25kg.and 25/50kg. weighing December. ◾ Automatic filling into bags with an open mouth. ◾ Lower and upper tolerance values that can be programmed separately. ◾ Automatic sack shaking mechanics. ◾ Separate weighing container feeding system according to the type of product to be bagged. ◾ Double coil feeding driven by separate motor. ◾ Single coil feeding driven by two-speed motor. ◾ Belt feed driven by two-speed motor. ◾ According to the product to be bagged and the desired tolerance, 13-22 tons/hour (50 kg. capacity Decoupled in bags) between. ◾ Special system panel from IP54 protection class ◾ Regulation bunker weighing unit and special vibration units in unloading bunkers. ◾ Easy calibration with keypad. ◾ Height adjustable sewing machine column.

These are the turned parts,which used in motorcycle indusry, after machining, use the vacuum packing prevents oxidation.

Straight, Zig-zag, anvils and bottom knives for AUCOUTURIER®, RECORD®, ILAPAK®, CLEMENT®, TEVOPHARM®, BOSCH®, OTEM®, ULMA®

TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open.

Skinpack packing machine at semiautomatic cycle to package objects of either small, medium or large size, between cardboard and transparent plastic film. The skinpack package allow immediate display of the product, possibility of both advertising in colour on the cardboard surfaces, practicality of the packaging, which can be hung in showcases. Safety protection with sensors. The cardboard support can be replaced with a sheet of bubble wrap (bubble polyethylene). CE-approved machine with low voltage controls, electrical panel with Siemens PLC, safety module (Pilz), safety protection on the work area with safety sensor (the movement of the frame descent only occurs with closed protection, the movement of ascent is driven by a dual control). The packaging machine mod. FP-390 has a limited energy consumption as the resistors are activated only at the time of packaging (on the other Skinpacks the resistances are always on) and there is no risk of overheating.

The F1000 carton erector is used when a large number of boxes of the same size are to be formed. With the erector it is possible to form the boxes and accumulate them in a specific area of ​​the warehouse, ready for use. By combining the erector with a line (taping base, filling surface and taping machine) it is possible to create the boxes as they are needed, without taking up space for accumulation. The erector automatically forms the boxes by taking them from the side magazine and folding the four lower flaps. The settings regarding box size, speed, etc. are all settable via a convenient front panel. Operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F1000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box.

Plastic film for automatic packing machines is primarily used for the following: E-commerce: as rolls for despatch packaging where the product is automatically wrapped in film, as new packaging for returned goods, etc. Pharmaceutical industry: for bundling and thereby securing the shipment of multiple packages Sanitary products: for packaging paper towels and tissues, nappies and other sanitary items Insulation industry: for packaging insulation boards using stretch packing machines Food industry: food packaging machines (frozen foods, fruit, vegetables, etc.)

TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

FC LINE HOOD PACKAGING MACHINE The FC LINE has a fresh design and solid structure, an electronic of new generation, and several other technical improvements which improve even more the performances of these machines. Three models are available with a support plan of mm. 400x250x200h - mm. 520x390x250h - mm. 580x780x250h. The dimensions of the support surface are to be considered with the closed hood. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product.

The MINIMA packaging machine designed for medium/small production realities (artisanal, commercial, etc.), makes versatility and minimum bulk its strengths. Absolute reliability and high efficiency, combined with high operating silence, low energy consumption and ease of use, unique in its kind, are qualities that make it a cutting-edge product. All the functions of the machine are displayed and controlled electronically thanks to the digital panel. The dimensions of the support surface are 350x240x140 mm h (height of the closed hood) The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. The choice of the machine must take into account that: the front opening of the "Minima" bell is 23 cm but laterally drops down to zero the dimensions of the box (height + depth) must not exceed the width of the reel 350 mm also considering that there must always be at least 50 mm of waste.

Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side)

The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller

Packaging machine with automatic cycle Skinpack, for wrapping objects of small, medium or large dimensions, between cardboard and transparent plastic film. The extreme usability and the use of unskilled workers encourage the use of this machine. The package Skinpack allows you to see the product immediately, it gives you the opportunity to advertise in color and include information on the carton, convenience of packaging that can be hung in the exhibitors. Given the high power of the machine is possible to use unperforated cartons.

Industrial washing brush refills are used across numerous industries including, glass manufacturing, packing machines, crate washing, tray washing, keg washing, food preparation machines, pallet washing, fruit washing and many more industries Our brushes are manufactured to suit each specific product in both robust products to delicate cleaning processes and our aim is to offer you the best brush for your product.

Industrial washing brushes are used across numerous industries including, glass manufacturing, packing machines, crate washing, tray washing, keg washing, food preparation machines, pallet washing, fruit washing and many more industries Our brushes are manufactured to suit each specific product in both robust products to delicate cleaning processes and our aim is to offer you the best brush for your product.