Overvoltage protection - Import export

Surge protectors, also known as SPDs (Surge Protection Devices), are devices that absorbes the voltage variation in place of the installed equipment, thus also drastically reducing the risk of breaking of electrical appliances. Scorpio is a SPD, available in different models (differential or common mode), specific for low voltage and protects against the direct and indirect effects of lightning or other transient overvoltages of a differential type (line - neutral). It must be installed upstream of the electrical or electronic devices. Available in different models Frequency: 50/60 Hz -Fast surge protection -Small size -Protection fuse in series with the line -Can be used as T3 (protect a single device) or T2 (protect multiple devices) -The 10kV models are equipped with a LED indicating correct operation

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product Description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper, Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,Imin)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

The module supports 4-channel thermocouple signal acquisition The module carries with 4 analog indicators The module supports 9 kinds of conventional thermocouple temperature measurement type The internal bus of the module and field input adopts magnetic isolation The module input channel supports TVS overvoltage protection 24-bit ADC resolution (Σ-δ type)

CT-3238: 8-channel analog input /0&4-20mA/15-bit single-terminal Module features The module supports 8-channel current signal acquisition. The module can be configured for 0-20mA or 4-20mA current signal acquisition. The module supports 2-wire (non-loop output, external power supply required) or 4-wire current sensor input. The internal bus of the module and field input adopts magnetic insulation. The module input channel is connected to the field active analog signal current output sensor. The module channel equips with TVS overvoltage protection

The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0,35 % (opt. 0,25 %) FSO — diameter 35 mm — cable and sensor section separable — small thermal effect — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — SIL 2 (safety integrity level) according to IEC 61508 / 61511 — different cable and elastomeres — customer specific versions

The separable plastic immersion probe LMK 858 was designed for level measurement in aggressive media, desalination plants and for use in more viscous media such as sludge. Since the area of application is often outside a building, great emphasis was placed on high surge / lightning protection. The immersion probe is based on an extremely robust and precise pressure sensor, the membrane of which consists of a high-purity ceramic. Another special feature of the LMK 858 is the separability of the probe head and cable part. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — housing PP-HT — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — cable protection — diaphragm pure ceramic (99.9 % AI2O3)

The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if necessary. The sensor head can be separated from the cable part and can therefore be replaced if necessary without time-consuming assembly work. Features: — nominal pressure: 0 ... 1 mH2O bis 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 35 mm — diaphragm ceramics Al2O3 (99.9 %) — excellent long term stability — integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — mounting accessories — different kinds of elastomer

DC12~24V Power input DC12~24V Power supply with overcurrent Overvoltage and polarity inverse protection

Aluminum panel with IP65 compliant; 12.1" XGA TFT, Optimum resolution 1024*768, Project Capacitive touch screen; Support Intel® the 6/7/8/9th Gen. Core™i3/i5/i7, Pentium, Celeron LGA1151 socket CPU; 3x Gigabit Ethernet ports; 4 x RS-232 / RS-485 Interface with surge prot ection, RS485 support automatic flow control; Wide voltage DC12~24V input, reverse polarity protection, overvoltage protection, overcurrent protection; Extend WIFI/3G/4G network from Mini-PCIe slot; I/O: HDMI/ 3GLAN /6USB / 4COM

21.5 inch IP69K Stainless Steel Panel PC based on Intel® Celeron® J1900 processor Support Intel® Celeron® J1900; Rugged IP69K stainless steel case; M12 type plug. All interfaces use waterproof aviation plugs; 21.5" Full HD TFT, Optimum resolution 1920*1080, Project Capacitive touch screen; Wide voltage DC12~24V input, reverse polarity protection, overvoltage protection, overcurrent protection. Rugged IP69K stainless steel case, Fanelss design High-strength 304 stainless steel housing that meets IP69K protection resistance detergent. Fanless and sealed enclosure M12 type plug All interfaces use waterproof aviation plugs which are waterproof, corrosion-resistant, chemical-resistant, detergent-resistant, and disinfectant-resistant.

15 inch IP69K Stainless Steel Panel PC based onIntel® Celeron J1900 CPU Support Intel® Celeron® J1900; Rugged IP69K stainless steel case; M12 type plug. All interfaces use waterproof aviation plugs; 15" XGA TFT, Optimum resolution 1024*768, Project Resistive Touch screen; Wide voltage DC12~24V input, reverse polarity protection, overvoltage protection, overcurrent protection. Rugged IP69K stainless steel case, Fanelss design High-strength 304 stainless steel housing that meets IP69K protection resistance detergent. Fanless and sealed enclosure M12 type plug All interfaces use waterproof aviation plugs which are waterproof, corrosion-resistant, chemical-resistant, detergent-resistant, and disinfectant-resistant.

21.5 inch capacitive Panel PC based on Intel® 6/7/8th Gen. Core™i3 i5 i7 processor Aluminum panel with IP65 compliant; 21.5" Full HD TFT, Optimum resolution 1920*1080, Project Capacitive touch screen; Support Intel® the 6/7/8/9th Gen. Core™i3/i5/i7, Pentium, Celeron LGA1151 socket CPU; 3x Gigabit Ethernet ports; 4 x RS-232 / RS-485 Interface with surge prot ection, RS485 support automatic flow control; Wide voltage DC12~24V input, reverse polarity protection, overvoltage protection, overcurrent protection; Extend WIFI/3G/4G network from Mini-PCIe slot; I/O: HDMI/ 3GLAN /6USB / 4COM

19 inch capacitive Panel PC based on Intel® 6/7/8th Gen. Core™i3 i5 i7 processor Aluminum panel with IP65 compliant; 19" SXGA TFT, Optimum resolution 1280*1024, Project Capacitive touch screen; Support Intel® the 6/7/8/9th Gen. Core™i3/i5/i7, Pentium, Celeron LGA1151 socket CPU; 3x Gigabit Ethernet ports; 4 x RS-232 / RS-485 Interface with surge prot ection, RS485 support automatic flow control; Wide voltage DC12~24V input, reverse polarity protection, overvoltage protection, overcurrent protection; Extend WIFI/3G/4G network from Mini-PCIe slot; I/O: HDMI/ 3GLAN /6USB / 4COM

DC12~24V Power input DC12~24V Power supply with overcurrent Overvoltage and polarity inverse protection Easy to switch RS232/RS485 RS232/RS485 support automatic data flow control

Be used for iPhone and Android ， such as iPhone, Samsung, Huawei, Meizu, Xiaomi, oppo, vivo, etc. You can charge 3 devices at the same time, and save socket space and solve the problem of insufficient sockets. Name ： Three-Port USB Wall Charger Color ： Black / White Rated Input ： AC 110-240V ~ 50 / 60Hz 0.5A Rated Output (USB 1) ： 5V == 2.4A Rated Output (USB 2) ： 5V == 2.4A Rated Output (USB 3) ： 5V == 2.4A Total Output ： 5V == 3.4A Max Shell ： PC + ABS Chip ： SF6771S Protection ： Overvoltage / Under-voltage / Overcurrent Short-circuit / Over-temperature Protection Certification ： CE / RoHS Packing ： Color Box

Our LoRaWAN® ZHAGA KSK-LK01 Controller is a smart lighting solution that follows ZHAGA standards for seamless integration. With LoRaWAN® connectivity, it enables remote management, energy efficiency, and secure communication. Easy to install and scalable, it's a future-proof choice for efficient, interoperable, and intelligent lighting control systems. ZHAGA controller typically includes various input and output ports, such as power supply input, communication input, and output for controlling the LEDs. It receives signals from the driver or control system, interprets them, and translates them into commands that can be understood by the LED module. The controller also monitors the operating conditions of the LEDs, such as temperature and current, and adjusts the performance accordingly. It ensures that the LEDs operate within their specified parameters and protects them from overvoltage, overcurrent, and overheating.

— Gas-cooled DC TIG inverter welding machine — TIG welding with high frequency starting — TIG lift arc welding without HF — MMA welding — MMA pulse welding and pulsed TIG welding up to 2 kHz — Reduced secondary current accessible using torch trigger — Adjustable up-slope/down-slope — Adjustable gas pre-flows/post-flows — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function — Energy-saving thanks to high efficiency and standby function — Portable, including shoulder strap — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

— Inverter welding machine, DC — Very light-weight, only 4,7 kg – housing made of aluminium and impact-resistant plastic — Portable, shoulder strap — MMA and TIG lift arc welding — Cellulose electrodes: 100% safe for vertical-down welding — Welding of stick electrodes up to 4 mm — Pulsed MMA welding: — Especially suitable for root welding — Outstanding gap bridging with no sagging of the root side — Fine-flaked weld surface with a TIG look for final passes — Less finishing work thanks to less spatter — Ideal for difficult electrodes — Less distortion thanks to controlled heat input — Pulsed TIG welding with up to 2 kHz — Connection capability for remote control — IP23 spray water protected — Arcforce, hot start, antistick — Energy efficient due to standby mode — 3.5 m mains lead with 16 A earthed plug — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Wide range input Extensive Protection (e.g. short circuit-/no-load/overvoltage protected) CEC and Energy Star Level VI compliant EN55011 Group I Class B Safety class I Isolation voltage 3kV High efficiency

Wide range input Extensive Protection (e.g. short circuit / no-load / overvoltage protected) CEC and Energy Star Level VI compliant EN 55022 group I class B Safety class II Isolation voltage 3 kV Option: Mains Plug Versions USA, AUS, UK

Wide supply voltage range 7 to 40 V Wide compensated range (0 to 70°C) Total accuracy down to 1% over 0 to 70°C, all effects included (maximum) Standard 0.5 to 4.5 V analog output Digital I2C output up to 15 bits (pressure + temperature) Overcurrent and overvoltage protection Overload and short circuit protection Integrated EMC protection Standard M8 output connector Gage configuration 20 mBar – 7 Bar

Wide supply voltage range 7 to 40 V Wide compensated range (0 to 70°C) Total accuracy down to 1% over 0 to 70°C, all effects included (maximum) Standard 0.5 to 4.5 V analog output Digital I2C output up to 15 bits (pressure + temperature) Overcurrent and overvoltage protection Overload and short circuit protection Integrated EMC protection Standard M8 output connector Gage configuration 20 mBar – 7 Bar

Wide supply voltage range 7 to 40 V Wide compensated range (0 to 70°C) Total accuracy down to 1% over 0 to 70°C, all effects included (maximum) Standard 0.5 to 4.5 V analog output Digital I2C output up to 15 bits (pressure + temperature) Overcurrent and overvoltage protection Overload and short circuit protection Standard M8 output connector Gage configuration 20 mBar – 7 Bar, or vacuum

Switchmode USB power supplies. Confirm to IEC 60950Additional information •Output voltage tolerance: +2% / -2% •DC output: USB socket Typ A •Current: 1000 mA •Family : FOX5 •Frequency: 50 / 60 Hz •Standard: IEC60950-1; IEC62368 •Humidity: 10% - 95% •Working temperature: 0°C - 40°C •Input tolerance: ±10% •Storage temperature : -40°C - 70°C •AC Input: EURO, US/JP •Input voltage: 100-240 V •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Output voltage: 5 V •Protection Class: II

Product information "FOX6- XM-USB 2nd Gen" IEC 60601-1 approved, ≤ 10μA leakage current, Protection class 2xMOPP, DOE 2016 ready, IP42 approved exchangeable plug system as additional accessories, Double Safety: Housing snapped & welded.