Results for
CETIK GRUP
Turkey
In today's world, especially during transitions between warm and cold environments, the issue of fogging on eyeglass lenses is a common problem for many people. The OPTILUCE AntiFog Fog Prevention Spray Set provides an effective solution to this problem, offering eyeglass users a clear vision and a comfortable user experience. Advantages and Ease of Use: Effective Fog Prevention: OPTILUCE AntiFog Fog Prevention Spray prevents fogging on your eyeglass lenses for up to 3 days, providing clear vision at all times. Wide Range of Use: The spray can be used during daily life transitions between hot and cold weather. It's suitable for use on snow goggles, sunglasses, helmet visors, swimming and diving goggles, as well as on all optical surfaces such as computer screens
Request for a quoteQUELLTECH GMBH
Germany
Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction.
Request for a quoteQUELLTECH GMBH
Germany
The new QuellTech Q5 Laser Scanner Series combines the advantages of small form factors with both high resolution and scan rate. The sensor disposes of different set-up possibilities with respect to the analysis algorithm. Measurement results are delivered via Ethernet, calibrated in the X / Z plane. Special adjustable algorithms can be selected, extremely useful particularly also for optically most demanding surfaces. Time-consuming calibration tasks for the user are no more required, as the calibration routine runs on board. High Scan Rate with up to 14,000 Profiles per Second Due to an appropriate limitation of the image range (AOI) in X and Z direction, the scan rate could considerably be increased. High resolution and detection frequency with up to 14.000 profiles and 28 Mio. points per second •X measuring range from 10 to 1022 mm •Z measuring range (height) from 5 to 878 mm •Laser wave length blue 405/450nm, red 650nm
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Colorimeters measure colour in a substance, for example in water. It defines the measurement of the colour to enable its identification, using the lightwave spectrum. Colorimeters are a form of a spectrophotometer. The use of mirrors in the system, redirect the light beam from the light source to the sample and back to the sensor to enable a reading. Knight Optical provide high quality coated front surface mirrors of varying reflection averages from stock and to custom specifications. Knight Optical provide several metallic coatings such as: •UV Enhanced Aluminium •Enhanced Aluminium •Protected Silver •Protected Gold •Visible Dielectric •NIR Dielectric These are all available as custom coatings depending on your requirements for your colorimeter.
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Optical flats are single precision flat surfaces. They are used as reference surfaces to compare flatness of a substrate where flatness is unknown. When a high quality optical flat is placed on top of a polished substrate and used in conjunction with a monochromatic light source light bands are formed. The light bands that are present are known as interference fringes and their shape represents how flat the part being tested measures. Dependent on how many rings are formed or how straight the presented lines are is an indication of how flat the tested part is. Optical flats are used for testing gauge blocks. Optical flats are also used in interferometers and high quality flat optical mirror and window sub-straights for laser applications. This range of quartz optical flats are single-sided. Quartz has low thermal expansion properties and is very durable and cost effective solution over UV grade fused silica. Read PDFs for more information
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer Meniscus Lenses for use within Optical Systems. We supply a range of Meniscus lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Any spherical surface will introduce spherical aberrations to an optical system. Meniscus lenses are designed with the curvatures of the lens in mind to minimise these spherical aberrations. This effect is more noticeable with higher index glasses as spherical aberrations increase with the change in index. Meniscus lenses can be an effective compromise on cost and aberration when compared to using aspheric lenses or multiple lens. Fore more information read the PDF….
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Monochromatic lights have a low pressure sodium light source that emits monochromatic light in which rays have virtually the same wavelength. This light is a very effective way of viewing fringe patterns on the surface of optical flats (Newton rings) Knight Optical's standard type moonlight has a straight line engraved across the diffused screen enabling the operator to easily compare the straight lines of the component being tested thus identifying how flat the flatness is. Other options of monochromatic lights are available enhanced version and floor standing version. These lights are not supplied with the optical flat as standard however we stock a range of quartz and Zerodur optical flats with a range of flatness’s to meet your application. Monochromatic light units are suitable for the following electrical services: 220/240V, 110V and 12VDC on selected units. Contact our technical team for further information. FOR MORE INFO READ PDF…
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical offer a range of Stock N-BK7 Dome Windows, for use with Underwater Lighting. A dome is an optical window composed of two parallel curved surfaces. Domes are commonly used in defence applications and often in extreme environments such as Submersible ROV’s. The shape of the window creates a naturally strong shape that gets tougher under pressure. Using a curved dome optical surface allows for an increased beam angle, therefore allowing a greater area to be lit from one light source. For visible applications, N-BK7 with its high optical quality and uniform transmission and low absorption in the visible spectrum makes it an ideal material for underwater lighting. A tough and cost effective solution which allows for good transmission of the light source in the underwater environment will both protect the light source as well as transmitting from 300nm up to 2µm. For more information read PDF
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Precision grade plate beam splitters offer higher flatness and parallel specifications particularly useful in laser and imaging applications. Both faces of these precision beamsplitters are polished to a high degree of flatness of λ/4 and have excellent surface quality. Precision splitters are made from high quality optically polished BK7 with both surfaces controlled to a high degree of parallelism. Our stock ranges of precision beamsplitters are available for use in Visible, Near Infrared and Telecoms wavelengths with 50/50 split ratio. The beamsplitter coating is a high quality dielectric coating, the non-splitting face of the beamsplitter is multilayer antireflective coated to eliminate second face ghosting effects. For more information read the PDF
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
With the chip-removing microstructuring of metal surfaces, LT Ultra offers the right manufacturing technology for the production of embossing tools with optical surface qualities that allow economical replication in large numbers. Examples of microstructuring are the production of microfluidics or microlenses on our ultra-precise multi-axis machines. We can manufacture the structures directly in various materials such as brass, chemically deposited nickel or in selected hardened steels.For the replicating production of optical components, ultra-precise mold inserts made of steel are of particular interest due to their very long service life compared to other materials. In order to avoid the final polishing, which often leads to an undesirable change in shape or which is impossible due to a high structure density, LT Ultra offers ultrasound-assisted machining of steels with geometrically defined cutting edges made of monocrystalline diamond.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
LT Ultra is your partner for the production of optical surface qualities in injection mold inserts. For example, we can manufacture inserts for the injection molding of spectacle lenses with several focal lengths as well as mold inserts for microlenses or components for vehicle lighting systems. In addition to simple geometries such as spheres or aspheres, we mainly manufacture non-rotationally symmetrical components and freeform surfaces.Mold inserts for a long service life can be made from chemically deposited nickel (NiP). Here you can work directly in the nickel. The advantage is that the very durable nickel can also be deposited on substrates that could not be brought into optical quality themselves or only with great effort. On request, LT Ultra offers the complete delivery of the mold insert as well as the processing of additional parts.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
Optical surfaces out of steel without polishing. Ultrasonic assisted diamondturning on steel parts. Pyramidal mirrors, Ellipsoids, Masters, Toroids of all types, Roof mirrors, Conical mirrors, Bifocal paraboloidal mirrors, Waxicons / axicons, Stepped mirrors, Chopper blades, Scraper mirrors, Cylindrical mirrors. Other special shapes are available on special order.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
We find decorative coatings wherever an attractive or optically effective surface is required. Examples include the construction sector (interior and exterior), office organisation, interior decoration, reflectors, veterinary medicine, labels, roof construction and other niche segments.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
We manufacture a large number of standard products as well as customer-specific special parts with optical surface qualities as contract manufacturing. You are welcome to get an overview in the category metal optics.You can also download all metal optics directly from our general overview or find them in our download area .In addition to such components with an optical function, we also manufacture precision parts for which a high geometric accuracy is in the foreground, such as air bearing components or micro-milled parts. With an extensive inventory of ultra-precision machines and the corresponding measuring technology, we manufacture with accuracies down to the sub-micrometer range and with roughness up to approx. 1 nm [Ra]. LT Ultra serves both single and series production. We look forward to your inquiry.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
To create ideal conditions in terms of rigidity and damping for multi-axis machining, the series was equipped with hydrostatic (oil) bearings. By using diamond tools, optical surface quality can be achieved on a wide range of materials like crystals, nonferrous metals and plastics, even with complex geometries. Similar to the MMC 600/900 air bearing machines, the basic setup can be equipped with various accessories. The basic setup consists of 3 linear axes and can be upgraded by additional rotary, tilt or spindle axes to 4, 5 or 6 axes. Accessories, like different spindles, vacuum chucks, palleting systems, 3D touch probes for workpiece measurement, tool changer and automated tool setting, allow an effective use of the machine. Besides further accessories, there is the possibility to develop customized solutions, to adapt the machine to your needs.Please do not hesitate to contact us.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
To create ideal conditions in terms of rigidity and damping for multi-axis machining, the series was equipped with hydrostatic (oil) bearings. By using diamond tools, optical surface quality can be achieved on a wide range of materials like crystals, nonferrous metals and plastics, even with complex geometries. Similar to the MMC 600/900 air bearing machines, the basic setup can be equipped with various accessories. The basic setup consists of 3 linear axes and can be upgraded by additional rotary, tilt or spindle axes to 4, 5 or 6 axes. Accessories, like different spindles, vacuum chucks, palleting systems, 3D touch probes for workpiece measurement, tool changer and automated tool setting, allow an effective use of the machine. Besides further accessories, there is the possibility to develop customized solutions, to adapt the machine to your needs. Please do not hesitate to contact us.
Request for a quoteWALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG
Germany
Integrated motorized magnification and illumination shift to check the active surface of optical fiber glas connectors for defects.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BIAX - SCHMID & WEZEL GMBH
Germany
BIAX Half-moon Pattern Scraper, particularly suitable for: • scraping oil-pockets • for optically pleasuring surfaces. Order number 200040420 Power [W] 800 Noise level [db (A)] 71 Weight [g] 2,7 kg (Dimensions scraper LxWxH 405 x 76 x 92 cm) No. of strokes [min¯¹] 500-1.850 Stroke length [mm] constant 2 mm Included Accessories 1x hexagonal screwdriver SW 4 (item no. 001 363 503) 1x scraper carrying case (item no. 001 401 819) 1x set of 2 pcs. Carbon brushes 230 V (item no. 001 328 362) 1x operating instructions (item no. 001 238 344) 1x spare parts list (item no. -)
Request for a quoteLEICA MICROSYSTEMS
Germany
Optical profilometer for contactless 3D surface metrology. Combines confocal metrology in HD with interferometry to a versatile dual core system. High-performance software, simple module selection with one click and confocal scanning without movable parts help to make the analysis very efficient and fast. HD confocal measurement with vertical resolution up to 2nm for surfaces with sloping areas and intricate structures. Interferometry with a resolution up to 0,1 mm for even surfaces with microstructures. Fast, reproducible data capture due to innovative HD microdisplay scanning technology without any movable parts in the sensor head. The integrated HD CCD-Camera has an extra-large field of view, for the analysis of bigger areas. Realistic color imaging due to four varicolored LEDs in the sensor head.
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
IMOS Interference Microscope-nanoprofilometer enables accurate, quantitative, ISOcompliant noncontact surface measurements and characterization of micro and nanoscale surface characteristics, capturing up to two million data points in seconds. Choosing the right optical profilometer depends on your application requirements, including speed, accuracy, vertical range, automation and flexibility. IMOS optical surface profilometer provides powerful versatility in noncontact optical surface measurements. The system makes it easy and fast to investigate a wide range of surface types, including smooth, rough, flat, sloped and stepped surfaces. All measurements are nondestructive, fast and require no special sample preparation.
Request for a quoteNEXTSENSE GMBH
Austria
Specially developed for the conditions in final assembly, the automated optical measuring system CALIPRI CB20 measures gap and flush with the highest precision and repeatability, even on poorly or excessively reflective surfaces. The key to this is the patented CaliBreezeTM technology, which uses a thin layer of condensed water to optimize the optical properties of different surfaces for measurement. After the measurement, which only takes a few seconds, the condensation layer disappears without residue. CALIPRI CB20 integrates two patented technologies: CaliBreezeTM technology and the Calipri principle. The latter is a technology renowned in the industry and already integrated in all other CALIPRI solutions from Nextsense. Thus, the cross-platform measurement specifications allow the comparison of the measurement data of all CALIPRI solutions, which simplifies the optimization of production processes.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
The surface control optic FLO is used for surfaces with low reflection and is particularly suitable for surface control in press plants.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
The hand controller HST1.2 is used to manually control OLIGO surface control optics. All common surface control optics can be controlled via a dial with a large, clearly legible scale.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
The surface control optic VAO is used for surfaces with medium to high reflection and can be employed in all coating processes in the industry. It stands out with its slimline design.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
Ths surface control optic LPS50 is used for surfaces with low to medium reflection and can be employed in all coating processes in the industry.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
The surface control optic LEDLPO is used for surfaces with high reflection and can be employed in all coating processes in the industry. It projects very focused, multi-point light on a surface (sunlight simulation). Possible surface defects and holograms are more visible.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
The surface control optic LEDSLO is used for surfaces with high reflection and can be employed in all coating processes in the industry. It projects multi-point light on a surface (sunlight simulation). Ultra-fine defects are visible with LEDSLO.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
The surface control optic sidemaxLED is used for surfaces with medium to high reflection and can be employed in all coating processes in the industry. Due to it´s uniquely precise and low dazzling parastic image, surface errors even become visible with low light levels.
Request for a quoteOLIGO LICHTTECHNIK GMBH SURFACE CONTROLS
Germany
The surface control optic LPS100 PM is used for surfaces with medium to high reflection and can be employed in all coating processes in the industry.
Request for a quoteResults for
Optical surfaces - Import exportNumber of results
41 ProductsCompany type
Category