Nickel ores - Import export

zinc diecasting*for rods up to 16 mm Ø*nickel plated brass screws*location hole 10 mm Ø

zinc diecasting*for rods up to 16 mm Ø*nickel plated brass screws*location hole 10 mm Ø

zinc diecasting*for rods up to 16 mm Ø*nickel plated brass screws

zinc diecasting*cork lined jaws*capacity 0 – 80 mm*rod Ø 10 mm

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.

This metal shell is made by progressive deep drawn stamping on 80T pnumatic press machine with +/-0.05mm tolerance for all dimensions, productivity is 60000pcs daily, which can be zinc or nickel plated with 24 hours for salt spray test.

With the chip-removing microstructuring of metal surfaces, LT Ultra offers the right manufacturing technology for the production of embossing tools with optical surface qualities that allow economical replication in large numbers. Examples of microstructuring are the production of microfluidics or microlenses on our ultra-precise multi-axis machines. We can manufacture the structures directly in various materials such as brass, chemically deposited nickel or in selected hardened steels.For the replicating production of optical components, ultra-precise mold inserts made of steel are of particular interest due to their very long service life compared to other materials. In order to avoid the final polishing, which often leads to an undesirable change in shape or which is impossible due to a high structure density, LT Ultra offers ultrasound-assisted machining of steels with geometrically defined cutting edges made of monocrystalline diamond.

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

With the help of the 3D-MID process, plastic parts can be metallized not only over the entire surface, but also selectively. To do this, the plastic part is activated with a special laser at the points that are to be coated (this is referred to as laser activation or laser direct structuring). The additives contained in the plastic directly under the plastic surface are “exposed” by the laser treatment. In a chemical bath, copper particles can then be deposited specifically only on the activated surfaces. Other metals, e.g. nickel, tin or gold, can then be deposited onto the starting layer of copper. In this way, a selectively coated plastic part is obtained. MID technology thereby makes it possible to selectively coat two-dimensional and also three-dimensional plastic parts and use them, for example, as circuit carriers for electronic or mechatronic assemblies. With the LPKF-LDS process

RK Rose+Krieger has optimised its RK Duoline profile linear unit for use in cleanrooms and now offers spindle and belt-driven RK Duoline Clean linear units, with or without vacuum suction, in the popular sizes 60 and 80. A total of eight different versions passed EN ISO 14644-1 testing to be awarded cleanroom certification in the global classifications 1 (RK Duoline Clean 60 SU with 0.5 m/s vacuum suction) to 5 (RK Duoline Clean 80 Z without 0.5 m/s vacuum suction). All the requisite cleanroom suitability tests were conducted at the Fraunhofer Institute for Manufacturing Engineering and Automation (IPA) in Stuttgart. Key features RK DuoLine Clean All external steel parts nickel-plated or made of stainless steel Suitability according to EN ISO 14644 -1 for clean rooms Optionally with or without vacuum suction High efficiency Low no-load torque Central lubricating Access

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Introducing Master Alloys: The Epitome of Elemental Excellence Crafted with utmost precision and expertise, Master Alloys stand as a testament to the pinnacle of metallurgical innovation. Comprising a harmonious fusion of three fundamental elements - Aluminum, copper, or nickel - these alloys are meticulously blended with a remarkable concentration of other elements, resulting in an unparalleled composition. Master Alloys embody the perfect synergy between the base metals and their complementary counterparts. With a discerning eye for quality, our experts have curated a selection of alloys that showcase exceptional strength, durability, and versatility. Each alloy variant has been carefully engineered to meet the diverse needs of industries ranging from aerospace and automotive to electronics and construction.

Axon' offers an extended range of equipment wires and cables for any applications requiring resistance to high temperatures. Different types of constructions can be proposed and delivered ex stock. They are designed to resist high temperatures ranging from -90°C to +260°C depending on the insulation material ; PTFE, ETFE, FEP or polyimide. They are made with silver plated or nickel plated conductor copper alloy, tin, silver or nickel plated copper. They can be used for various applications: aeronautics, automotive, space telecommunications, electronics, military equipment, general industry, ...

Stamped leadframes are designed to support and accomodate electronic components and PCBA. They can be made with full or selective tin, nickel, silver or gold plating depending on the final requirement. They can be made with pressfit terminals to be inserted into Printed circuit boards. 3 D stamped leadframes can also be designed to your needs. Overmolded leadframes made with high performance plastic resins are designed to support components which are protected in a housing. The overmolding housing allows for the integration of : - the connection area for power components bonding - the output connector to the customer interface - specific terminals to accomodate components to be soldered in electric capacitors for example.

The range of cables has been designed to avoid propagation of fire and emission of toxic fumes in public places and industrial facilities in case of fire.These Low Smoke Zero Halogen (LSZH) cables and wires can be offered as single wires, shielded cables or multi-core cables jacketed with Axon' special compounds. They are designed to resist temperatures ranging from -50°C to +250°C. LSZH cables offered by axon' are made with tin plated copper, nickel plated copper, copper alloy, or silver plated copper conductor. They are insulated with special halogen free insulating material including Poliax™, Neutrax™, Polyimide, Axon Special Compound. This is an ideal solution for cabling of buildings, trains, subways, ships, industrial premises and all public places where security of people and material have to be assured

We produce bottle moulds and bottom plates in special alloys based on aluminium bronze or nickel bronze. Pieces are delivered as-cast, rough or fully machined.

The pressure regulator can be tightened by hand without the need for a spanner. It reduces the stored bottle pressure from max. 200bar (on request 300bar) to an outlet pressure which is adjusted at the flowmeter. The flowmeters are used to set the required flow in l/min. Important: The pressure regulator has a constant outlet pressure of 2.5bar which is necessary to protect the gas flow sensor of the orbital unit. Versions: — Special Argon Pressure Regulator with twin flowmeter, brass — Special Pressure Regulator with twin flowmeter for H2-gases, brass — Special Argon Pressure Regulator with triple flowmeter, brass Pressure regulators with different connections and for use with other gas types or nickel-plated version available on request.

art. Medium 32 / 34 mm - nickel-plated brass / steel art. Large 45 mm - nickel-plated brass / steel art. Small 27 mm - nickel-plated brass / steel Medium art. 32 / 34 mm - gilt brass art. argentina 34 mm art. Brasile 32 mm Square plastic cuff links 17x17 mm (logo: emblem, etc.) Round plastic cuff link ø 12 mm Rectangular plastic cuff link 13x19 mm(logo: emblem, etc.) plastic safety pin safety pin from 19 mm to 55 mm - brass / iron / steel art. America 46 mm art. California 34 mm art. Doppio i 35 mm art. Medium mm 39 - coloured 16 art. 315 mm 38 art. Large mm 46 art. Medium 39 mm shirt cuff clip 38 mm art. Norvegia mm 35x38 Pins, in the steel or nickel-plated brass version with standard, silver-colour plastic or coloured glass head. Lengths vary from a minimum of 10 mm to a maximum of 42 mm and with a variable width from 0.54 to 1.00. Other shapes for alternative uses on request.

CONEC has developed an ODVA compatible IP67 Fiber Optic connection for harsh indoor and outdoor environment. The new system is a bayonet locking enclosure with integrated LC Duplex Connectors and Adapters. The bayonet locking enclosure provides an easy and secured connection also under adverse conditions. The available materials for the housings are plastic, plastic metallized or nickel plated zinc die-cast for extreme harsh conditions. The LC connections are available for single mode or multimode transmission, depending on the requirements of the operated system. The major application for these connectors are connections from base stations to the transmission modules based on antenna poles or for network connections on the last mile into end users homes. This program is supplemented by preassembled patch cables in various lengths.

AMETEK Specialty Metal Products has been a leader in developing roll bonding dissimilar metals for more than fifty years. The advantage of clad materials is the end product combines the superior properties of each metal: Strength, Corrosion Resistance, Lightweight, Cost, Thermal and Electrical Conductivity. As a result, clad products produce a material superior to any of the individual metals taken alone. Clad metals produced by our roll bond technology combine two or more metals into a single sheet or plate that can be cut, welded or formed into a finished part ranging from chemical processing chambers and pressure vessels to small applications and clad pipe. We specialize in cladding stainless steel or nickel alloys to carbon steel as well as triple layer clad plates bonding stainless steel to an aluminum core. Because of the properties offered by clad metals, and the wide variety of cladding and backing materials available today, these metals can be combined to make custom

It is a funneled turbo atomizer. It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyester against the harmful effects of pesticides. The turbo fan is produced from Chrome (Cr)-Nickel (Ni) or galvanized sheet metal against corrosion.

1. A deep cylindrical permanent magnet assembled concentrically in a mild steel pot with spacer of Aluminum or Copper. 2. These magnets are primarily for gripping applications. 3. Magnet material used is Alnico 5, working temperature is up to 250 ° C. North polarity in center of holding face and each magnet has a coated keeper 4. Outer surface except pole can be red (smooth or wrinkle) painted, or coated with Zinc, Nickel or Chrome We have accumulated abundant experience and established stable and credible business relationships with customers worldwide. With rich experience in dealing with all types of large and small orders, we have developed extensive contacts with many local and international freight organizations. Consequently, we are able to ship our goods safely and reliably to almost anywhere in the world

Controller for electroless nickel baths / Controller for electroless copper baths Controller for electroless nickel baths Nickel controller with flow-through sensor Walchem's WNI Nickel Controllers are optoelectronic on-line analyzers that measure the actual concentration of nickel in solution.  The WNI410 is available as nickel-only, or with a pH control option which may be added in the field. Two separate pump outputs for nickel and reducer and another for pH are used, each of which is capable of totalizing either pump on-time, volume pumped, or metal turnovers. Integrated data logging is available to validate system performance. With a USB memory stick data and event logs that include nickel measurements, and relay status can be extracted. Download logs from the USB stick to a PC. Product features: Concentration Read in Units Selectable between grams per liter (g/L) or ounces per gallon (oz/gal). Backlit digital display also acts as a bar graph for a continuous "visual summar

"Combi" tools allow different technologies to be combined in a single step (in one tool) for more efficient plastic component production. Typical technologies applied in combined processes (depending on the requirements) are foaming, forming, laminating, edge folding, punching and joining. These processes allow different materials and material combinations to be used. "Combi" tools enable a very fast and cost-effective production process with minimized space requirements. Based on their longtime expertise and completion of numerous serial projects, FRIMO is able to supply optimized tooling solutions that perfectly meet the product and customer requirements. These range from small tools to special tools for large components for a nearly unlimited range of plastic applications. Our tools are available in steel or cast steel, as well as in aluminum, cast aluminum or nickel shells. For special applications, FRIMO also offers tools with interchangeable inserts, allowing the most efficient

Because of its strength, unique density and corrosion resistance, titanium has found applications in many industries. For high quality tubing products, it’s often a better substance to use than competing materials like stainless steels or super alloys. Titanium tubes are light weight and exceptionally corrosion and heat resistantThe density of titanium is about 60 per cent of that of steel- or nickel-based alloys giving significant weight savings in aerospace structures. The tensile strength is better than that of austenitic or ferritic stainless steels. Titanium is exceptionally corrosion resistant and exceeds the resistance of stainless steels in most environments. The metal is non-magnetic too, and has good heat transfer properties, with a melting point higher than steel alloys. Titanium is easily worked. Please note that we have a minimum order value of £10,000.

AMETEK Specialty Metal Products has applied the high purity wrought powder compaction process to Ductile Cobalt Alloys in order to produce multiple ductile cobalt strip products generally used by weld wire manufacturers as sheathing for flux cored and metal cored hardfacing materials. These alloys range from 80 to 95% cobalt with Iron or Iron-Nickel additions to improve ductility for drawing operations.

It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyester against the harmful effects of pesticides. The turbo fan is produced from Chrome (Cr)-Nickel (Ni) or galvanized sheet metal against corrosion. Angle-adjustable domestic propeller or high air flow Italian propeller is used. The water filter can be cleaned easily. It has a hydraulic mixing system. Thanks to the regulator, the pressure can be adjusted according to demand. In this way, spraying can be done at the desired flow rate. It can be easily connected to the tractor with a three-point suspension system. The turbo atomizer nozzle can rotate around its own axis to adjust the spray distance. There is an embossed and transparent level indicator on the tank.It can be easily connected to the tractor with the trailer tongue with pull type wheel jack system.

It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyester against the harmful effects of pesticides. The turbo fan is produced from Chrome (Cr)-Nickel (Ni) or galvanized sheet metal against corrosion. Angle-adjustable domestic propeller or high air flow Italian propeller is used. The water filter can be cleaned easily. It has a hydraulic mixing system. Thanks to the regulator, the pressure can be adjusted according to demand. In this way, spraying can be done at the desired flow rate. It can be easily connected to the tractor with a three-point suspension system. The turbo atomizer nozzle can rotate around its own axis to adjust the spray distance. There is an embossed and transparent level indicator on the tank.It can be easily connected to the tractor with the trailer tongue with pull type wheel jack system.