New plastic - Import export

DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv DryLin® N - Technical data DryLin® linear guide systems in the cleanroom DryLin® N - Applications DryLin® N - Design rules System selection & service life calculation NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. DryLin® N - Low profile linear guide system NK-02-17 DryLin® N - Low profile linear guide system NK-22-17-40 drylin® N - Low profile linear guide system NK-22-17-30 NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Rail made of anodized aluminum 2 Gliding elements made of iglidur® J or J200 3 Carriage made of chromated zinc or plastic 4 Carriage with threaded hole or through hole Advantages: Small installation height between 6 and 12 mm Lightweight Numerous carriage options – also with pretension Maintenance-free, self lubricating Corrossion-resistant Low wear with low coefficient of friction Rails in silver or black anodized When not to use ? When precision below 50 μ is required In high loads over 50 kg drylin® T drylin® R drylin® W When high resistance to chemicals is required drylin® W drylin® R DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv Standard, preload and floating bearing NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. 1. NW-01-27 standard 01 with through hole g 2. NW-02-27 standard 02 with threaded hole 3. Preload with through-hole or threaded hole 4. uinjection-molded with through-hole or threaded hole 5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung 6. NW-22-27-60P solid polymer carriage with through hole 7. NW-11-27-80 double carriage with through hole NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 1. Standard 02 with threaded hole 2. Injection-molded with threaded hole 3. Standard 01 with through hole NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P 1. Standard 02 with mounting nuts 2. Injection-molded with mounting nuts NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor

ALIMENTARY PALLETS WITH RUNNERS The new alimentary plastic pallets with runners are rugged, lightweight, easy to handle and environmentally friendly. Color: WHITE. Material: PE. Recyclable. Alymentary use. Versions: A: honeycomb structure, enhanced in strength and solidity, are ideal for intensive use; E: Floor sleepers and co-molded in a single piece. Excellent for use in automated systems for transport and storage. Minimum Order: according to the model.

NESTABLE ALIMENTARY PALLETS The new alimentary plastic pallets are rugged, lightweight, easy to handle and environmentally friendly. Color: WHITE. Material: PE. Recyclable. Alymentary use. Available with borders. Versions: A: honeycomb structure, enhanced in strength and solidity, are ideal for intensive use; Minimum Order: according to the model.

The new range of COEX plastic bottles BP.0025 (250 ml), BP.005 (500 ml), BP.01 (1000 ml) is resistant to chemically aggressive substances and is suitable for agrochemicals (herbicides, pesticides, insecticides, etc.), auto chemicals, household chemicals and other substances based on organic solvents. The use of high density polyethylene with the polyamide protective layer manufactured by co-extrusion blow molding COEX allows to use of the canisters for liquids which cannot be filled into polyethylene bottles due to the rapid destruction of the container or due to diffusion of products through the packaging walls. We offer you to expand the range group and core audience for your product. The bottles supply around Ukraine, Europe, CIS and Russia is conducted by the qualified transportation companies. The bottles customer pick-up is possible from Vasishchevo, Kharkov region, Ukraine or from the warehouse in Belgorod, Russia.

INOX® Insect Clean is a special cleaner for removing insect residues from glass, paint, chrome, metal and plastic surfaces. The new formula penetrates and softens dense and solid residues even faster, making it possible to remove the most stubborn insect residues quickly and effortlessly from all surfaces. Ideal for use before washing the car.

The new range of COEX plastic bottles BP.0025 (250 ml), BP.005 (500 ml), BP.01 (1000 ml) is resistant to chemically aggressive substances and is suitable for agrochemicals (herbicides, pesticides, insecticides, etc.), auto chemicals, household chemicals and other substances based on organic solvents. The use of high density polyethylene with the polyamide protective layer manufactured by co-extrusion blow molding COEX allows to use of the canisters for liquids which cannot be filled into polyethylene bottles due to the rapid destruction of the container or due to diffusion of products through the packaging walls. We offer you to expand the range group and core audience for your product. The bottles supply around Ukraine, Europe, CIS and Russia is conducted by the qualified transportation companies. The bottles customer pick-up is possible from Vasishchevo, Kharkov region, Ukraine or from the warehouse in Belgorod, Russia.

The new range of COEX plastic bottles BP.0025 (250 ml), BP.005 (500 ml), BP.01 (1000 ml) is resistant to chemically aggressive substances and is suitable for agrochemicals (herbicides, pesticides, insecticides, etc.), auto chemicals, household chemicals and other substances based on organic solvents. The use of high density polyethylene with the polyamide protective layer manufactured by co-extrusion blow molding COEX allows to use of the canisters for liquids which cannot be filled into polyethylene bottles due to the rapid destruction of the container or due to diffusion of products through the packaging walls. We offer you to expand the range group and core audience for your product. The bottles supply around Ukraine, Europe, CIS and Russia is conducted by the qualified transportation companies. The bottles customer pick-up is possible from Vasishchevo, Kharkov region, Ukraine or from the warehouse in Belgorod, Russia.

HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.

Gypsum board Primer is a white acrylic water primer with high strength and penetration. It is odorless, environmentally friendly and user friendly. Recommended for priming indoors and outdoors. It is suitable for the preparation of new surfaces painted with plastic and acrylic paints, such as plasterboard, plaster, concrete, bricks, trowel walls

New designed 360 degree rotating plastic kids baby walker with stopper Brand Name BODISKIDS Model Number BK2023040105 Material PP+alloy +Linen Frame Material Plastic Load Bearing 20KG Is Foldable Yes Age Group 6 months - 3 years Volume 0.1m³ Product name Baby Walker Keywords Activity Baby Music Walker Function Baby Learn Walking Certification ce Room Space Baby Care Room Advantage Eco-friendly Soft Comfortable OEM Acceptaple Description Baby Activity Toy Feature Multifunctional

Origin: China Brand Name: BODIS KIDS TOY CO.,LTD Model: BK2023040003 Material: Plastic Applications: kitchen, living room, bedroom, school, supermarket Design style: Contemporary Product size: 56*43*31cm Gross weight: 5.5 kg Package size: 43*30*55cm Color: Picture color Suitable age: 6 months to 3 years

Brand BODISKIDS Color pink,green,blue Material New PP plastic Frame material Electrostatic painting steel frame Frame structure Foldable frame structure Height 3 adjustable height Wheels 7 wheels can go any direction Function with pure multi-musics and flashing lights and removeable toys Age group 6-18 months old Weight capacity 15KG Certificate CCC,EN71,ISO9001,SGS

NEW Height Adjustable movable plastic baby boy urinal toilet training stand urinal potty children urinal itemBaby toilet trainer MaterialPP Plastic ColorAs picture LogoAccept Custom FeatureEco-friendly,Non-toxic Unit size27*13*52cm Unit weight691g Packing detail12pc/ctn,76*53.5*52mcm Payment30% deposit,70% balance before shipment

BODISKIDS Children'S Kid Baby Toys Roller Walkers With Wheels And Seat For Kids Product Name Baby walker Material 2mm thick New PP plastic Frame Material 0.6mm Electrostatic painting iron frame Frame Structure Foldable frame structure Cushion Pongee, sponges, fabric, detachable Color many colors Features Multi pure music Adjustable height positions for different baby ages colorful plastic wheels can rotate freely can add stoppers Max load 30 kg carton size 70*46*10 cm Suitable age 7-18 months old Certificates CCC,EN71 MOQ 60 PCS functions Music, mute wheel one button folding, panel can be disassembled to make dinner plate, cushion 6 adjustment

Dynamic mould temperature control is a temperature control method that allows temperature variations within the cycle and is also known as “variotherm temperature control”. While this method has been known for almost forty years, it has only undergone a dynamic development in the last few years. This is due to the increasingly exacting quality requirements of consumers (e.g. prevention of visible joint-lines, gloss variations and other surface defects) and the use of plastic materials in new applications. When a temperature control system is selected it is important to mind that it matches exactly with the application and that the economic benefit justifies the technical efforts as well as the energy consumption.

3 different E-books with many useful information about the production of a new plastic product. We analyze injection moulding tool with focus on cost optimized insert tools, material selection and different production methods in easy understandable e-books. 100% free of charge download on our homepage in different languages

If you fill your boxes with paper to secure your goods, you'll send a lot of heavy paper across the country which adds to your freight costs. The paper does not disappear afterwards, the packaging waste remains in full. This is not true for air cushions, as they consist of 99% air and only one percent of film. You’re sending practically nothing but air. Air cushion - a good idea for the environment Packaging with air cushions means the avoidance of transport damage with minimal packaging costs - a great idea for the environment! Particularly with AirWave air cushions from FLOETER. The latest generation of FLOETER production lines is able to produce very thin films down to a thickness of 12μm. This can save many tons of CO2, that would be produced in the production of heavy packaging material. Also, the recycling routes for polyethylenes have long been established. From the resulting plastic residues, new and durable products are being produced through recycling.

The new generation of plastic welding machines of the OMEGA 4 series combines technical standards at the highest level with ease of use. The modular arrangement of the machine components, consisting of press, control and generator, enables easy adaptation to the respective plastic part and the respective location. Simple system operation is guaranteed with the multilingual touchscreen With this standard machine, even the most difficult welding tasks can be mastered reliably thanks to their performance and control and monitoring options. The X series is the premium version of the Omega series. This series is also equipped with a proportional valve for a defined pressure control. In addition, this Omega series has a pneumatic pressure / counter pressure system and thus ensures smooth movement even at low pressure.

The new generation of plastic welding machines of the OMEGA 4 series combines technical standards at the highest level with ease of use. The modular arrangement of the machine components, consisting of press, control and generator, enables easy adaptation to the respective plastic part and the respective location. Simple system operation is guaranteed with the multilingual touchscreen With this standard machine, even the most difficult welding tasks can be mastered reliably thanks to their performance and control and monitoring options. The A series is the basic version of the Omega. Time and energy measurement are available for process monitoring. Compared to the S-du X-series, the generator and control are combined. This makes the A-series more compact, but limits the number of welding modes and storable programs.

The Eltex cable rewinders are the optimal accessory for our grounding devices or, in the passive version, also as a simple grounding cable reel for safe storage of the grounding cable and the grounding clamp. In addition to the well-known 601KR/BW passive rewinding cable reel with 9 m grounding cable in a plastic casing, the new 601KR/EW rewinding cable reel is available in an impact-resistant aluminum casing and can hold a grounding cable of up to 12 m. These reels can be used in Zones 1 and 21. Both reels are designed for wall mounting, but the 601KR/EW can also be swivel-mounted using a mounting bracket. A coupling plug can be used to easily connect the passive 70SG and 70PK clamps with the coupling bushing of the grounding cable.

Production Process of recyclable watermelon packaging bag A: Artwork confirmation B: Printing cylinders making C: Prepare raw material accordingly D: Printing E: Lamination F: Slitting or folding G: Bag making/cutting H: Final inspection J: Delivery Other information of recyclable watermelon packaging bag A: We are specialized in making all kinds of packaging materials, such as food bags, coffee bags, zipper bags, ziplock bags, stand up pouches, black bottom bags, aluminium foil bags, pet food bags, tobacco bags, fruit packaging bags, vegetable packaging bags, paper bags, tin boxes, hole puncher for plastic bags. B: We do printing according to your design artwork, just send us layered design in AI or PDF or PSD format. C: The MOQ is 10,000 pcs, the more the cheaper D: Similar samples are available Disclaimer: All trademarks and pictures shown here are as example of our production capability, they are not for sale, and they are the property of their owners.

Production Process of citrus packaging bags for retailers A: Artwork confirmation B: Printing cylinders making C: Prepare raw material accordingly D: Printing E: Lamination F: Slitting or folding G: Bag making/cutting H: Final inspection J: Delivery Other information of citrus packaging bags for retailers A: We are specialized in making all kinds of packaging materials, such as food bags, coffee bags, zipper bags, ziplock bags, stand up pouches, black bottom bags, aluminium foil bags, pet food bags, tobacco bags, fruit packaging bags, vegetable packaging bags, paper bags, tin boxes, hole puncher for plastic bags. B: We do printing according to your design artwork, just send us layered design in AI or PDF or PSD format. C: The MOQ is 10,000 pcs, the more the cheaper D: Similar samples are available Disclaimer: All trademarks and pictures shown here are as example of our production capabilities, they are not for sale, and they are the property of their owners.

We are successfully helping to convert a rapidly growing plastics waste stream into new life plastic products with our Dryflex TPE compounds based on Post Consumer Waste. The thermoplastic elastomer materials were developed to address demands in the automotive industry, which is obliged to use increasing quantities of post consumer waste and operate under the EU ELV Directive to ensure recyclability at the end of each vehicle’s life. The materials contain a high volume of post consumer waste from 33% to 80% by weight. Recyclate consists of polypropylene drawn from automotive mouldings, which are cleaned and re-ground and rubber tyre crumb from both OEM and after market tyres. Apart from the obvious benefit of recycling, the material exhibits other advantages when compared with virgin materials particularly its superior Ultra Violet, and weathering resistance and sound reduction properties. Applications Automotive interior & exterior trim Mudflaps Underbody stonechip protectors An

Manufactured from PE and PP According to EN ISO 4892-2 standard anti UV additive Corrosion resistant in compliance with EN ISO 9227 Standard In compliance with EN ISO 11925-2 and 13501-/E class fire-resistance In compliance with EN ISO 13200-4 Standard highly resistant to hooliganism Tip-up mechanism of the product operating with the center of gravity system The metal parts of the seats are designed and produced by laser cutting without seamless of monolithic 6 mm sheet and bending in press molds Seats are firmly attached to the barriers with the rail system mounted on the steps Fewer dowels are used on the steps with this system. This system allows the seats to be shifted from right to left, and allows them to be easily replaced with new seats in future times Plastic weight of the seat is 3,250 gr and total weight of the seat is 9,540 gr The armrest of the seat is made of PP Advertisement area is in the back surface of the seat