Multiple die-heads - Import export

Multiple heads are realized in zinc-coated steel sheet. Thickness of sheet steel 8/10 with Ø from 180 mm to 400 mm. Product category DUCTWORK

The xiB cameras stream images to the host computer via 4 lanes on a PCI Express Gen2 bus, boasting an impressive 20 Gbit/s of bandwidth. Together with minimal latencies the CPU load, the PCIe technology is ideal for high resolution CMOS sensors. The cameras are compactly housed in 60 x 60 x 38 mm, can be fully synchronized with their multiple GPIOs and offer an active Canon EF-Mount. All properties are extremely useful in multi-camera applications like 360 panoramas. In situations where multiple camera heads need to be placed in close proximity, system integrators can combine and aggregate the data streams from cameras with various resolutions via additional accessories.

The Raytek MI3 digital infrared thermometer represents a new generation of performance and innovation in continuous noncontact temperature monitoring for a broad range of OEM applications and manufacturing processes. Each MI3 infrared temperature thermometer is a two piece system with a miniature sensing head and separate communications electronics. The miniature sensing head can be installed in any system and outperforms much larger sensors, making the Raytek MI3 the best valued IR temperature sensor in its class. The OEMMI3 version of this digital infrared thermometer allows direct digital communication with the host machine controller without the need for an additional communication box. The innovative multiple sensing head interface, which can support up to 8 individually addressable heads per communication box, reduces sensor cost, simplifies sensor installation and applications troubleshooting, and provides the lowest cost per measurement point.

Many customers ask us what ROPP is and the simple answer is Roll On Pilfer Proof closure. Simply put it is an unthreaded aluminum shell that is placed on and pressed down onto the bottle neck while thread forming wheels spin around the shell and press against it to conform to the existing threads of the bottle and locking ring. In many respects a ROPP capper resembles a chuck capper although since it is not torquing a cap there is no clutch mechanism required. ROPP capping machines are available as a single head to multiple head high speed rotary systems. The big advantage of a ROPP capper machine is that it is sealing the product at the same time it is providing tamper evident security. The big disadvantage is that it is expensive to run more than one size cap. The neck and threads of the bottle must also be hard enough to withstand the pressure required to form threads such as glass or hard plastic.

2-component dosing solution with optimum installation space design cascadable multiple dosing system with small dosing head distances minimum space requirement in automation systems. The ViscoDuo-P 4/4 2-component dispenser is a valveless, static, space-saving mixing head with dispensers arranged directly in front of the mixer. The EC version dispensers have been specially designed for easy cleaning (Easy-Clean) and checking of the pump interior. No valves are required in the mixing head. The components to be mixed are metered into the static mixing tube purely volumetrically via the dispenser without dead space. Your advantages: - Processing of viscous materials, unfilled as well as very highly filled supply of the medium with only low inlet pressure - Setting the desired mixing ratio by adjusting the speed ratio of the two dispensers - sensors integrated without dead space in each component for online process monitoring - Withdrawal possible

The Raytek MI3 infrared temperature thermometer is a two-piece system with a miniature sensing head and separate communications electronics. The OEM version allows direct digital communication with the host machine controller without the need for an additional communication box. The innovative multiple sensing head interface, which can support up to 8 individually addressable heads per communication box, reduces sensor cost, simplifies sensor installation and applications troubleshooting, and provides the lowest cost per measurement point. Raytek MI3 ATEX/IECEx certified sensors can be used safely to monitor the right temperature of hazardous areas / processes with explosive atmospheres. All standard MI3 and MI3100 heads can be ordered with optional ATEX/IECEx certification. One specifically provided Ex-proof power supply can be used with 2 sensing heads.

VersaSolder uses selective laser soldering for applications where other methods fail. A laser beam heats an area without impacting the surrounding the key advantage of this non-contact joining technique.A lens assembly focuses the laser power which melts the solder onto the working area. It is tailored exactly to the specific shape of the solder joint and the beam may be circular, elliptic or a straight line. An optional pyrometer measures the temperature in the melt pot and the electronic actively regulates the power profile. Multiple solder heads heat various areas at the same time and a symmetrical arrangement reduces shift. In order to achieve higher productivity, nanosystec developed the Multi Beam Optic (MBO). It generates a number of sub beams processing more than one connection in the same time – up to 40 individual spots have been demonstrated.

FRIMO PURe Mix mix heads are available as two-component or multiple-component mix heads for various PU product manufacturing. Different sizes for the smallest and the largest output rates are available. FRIMO offers a patented PU spraying system for the production of high quality PU surfaces, such as for automotive interiors.

THE PROFESSIONAL PUMP WITH A HIGH VOLUME FLOW FOR MULTIPLE-HEAD APPLICATIONS. EVEN PRESSURE SIGNAL FOR HIGH PRODUCTIVITY. Proven 4,000 bar technology combined with high flow rates – greatly appreciated by the professionals. Especially for multiple-head applications, HYTRON® always ensures the required volume of high-pressure water. HYTRON® provides 6.0 or 7.6 l per minute with 4,000 bar. Whether you are using two or four abrasive cutting heads simultaneously, HYTRON® provides continuously adjustable pressure from ten to 4,000 bar. The two chamfered pressure intensifiers create an optimal cut. Customers buy European products because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality CONVENTIONAL WORKING PRINCIPLE WITH EVEN PRESSURE

This top-tier model combines advanced safety features and multimedia capabilities with a sleek, modern design. Designed for high-volume facilities, the PRO Ultra can handle up to 90 sessions per day without mandatory downtime between back-to-back treatments. Automatic daily reports sent to your email help you track usage, while the convenient scan-and-connect Wi-Fi enables remote diagnostics and software updates for seamless technical support. User-friendly automation is at the core of the PRO Ultra. The 22-inch touch screen allows for easy temperature and time settings, while an electric elevator and a customer sensor ensure optimal positioning without operator intervention. A 20" display above the cabin keeps clients informed of current temperature and remaining session time. Safety is paramount, with multiple features including open door, head proximity, operator, and nitrogen level sensors. Thanks to fiberglass shell, PRO Ultra is available in any RAL color at no additional cost.

3DMicromac‘s microSHAPE™ laser system is designed for the processing of large and flat substrates with high accuracy. The highly versatile system allows the combination of different laser processes in a single machine. In addition, it is capable of processing with multiple working heads – this parallel processing makes higher throughputs achievable. microSHAPE™ is an industry proven solution for all kinds of ablative and non-ablative processes. These include cutting, selective removal of thin films, and structuring processes like engraving and marking. The microSHAPE™ system is suitable for machining a variety of materials, e.g. glass, metals, polymer, ceramics, display stacks, and coated substrates. Free form cutting with extraordinary quality Damage free cutting edges Contactless processing enables minimal cost of ownership Cutting speed up to 1.5 m/sec Laser sources according to customer requirements Up to 3 independent beam paths

Designed for 24/7 operation this machine dispenses pallets and accumulates a loaded pallet stack outside the cell. Can be floor loading or over conveyor. Up to 30 cases or crates per minute Small footprint Enhanced Safety Features FEATURES & BENEFITS: -Specialist Brillopak robot heads. Run multiple products with no tooling changeover. -No manual heavy lifting. -System automatically lifts pallet stacks from floor and places loaded pallet stack onto floor for use with hand trucks. -Simple to operate by unskilled staff. -Entire system built and fully tested in our factory. Delivered in 2 pieces for very fast commissioning on site. ** Click for more **

The dual cell machine has a small footprint and is designed for cases, boxes, trays, and bags. Brillopak specialist end effectors will handle multiple case or bag sizes, as well as all current supermarket rigid/collapsible tray types without the need for tooling changeovers. Continuous palletising Multiple products and layer patterns Additional safety gate between cells FEATURES & BENEFITS: -Compact size. -Specialist Brillopak robot heads. Run multiple products with no tooling changeover. -Simple to operate by unskilled staff. -Easy to programme new patterns in-house. -Enhanced safety features. ** Click for more **

Our Flexible Robotic Palletiser is the smallest footprint and is designed for cases, crates and bags. Multiple products Multiple patterns Easy to program FEATURES & BENEFITS: -Compact: Smallest palletiser for crates. -Specialist Brillopak robot heads. Run multiple products with no tooling changeover. -Simple to operate by unskilled staff. Select the product and press start. -Easy to maintain. Simple plug in, plug out of new parts. -Enhanced safety features. ** Click for more **