Mounts more - Import export

25mm slender lighting surface . 125 Lm/w high light efficiency design , lumen output up to 2300 Lm/m . Multiple standard corner ( L type , X type , T type optional ) available for free connection . Multiple light distribution options (Diffuser , Microprism , Grating 30°, Grating 60°, Block frosted diffuser , Asymmetric， Double Asymmetric) to meet variety application requirements . Provide surface mounted buckle , more convenient installation

Knight Optical can offer Cube Beamsplitters for use within the Scientific Industry. We supply a range of Cube Beamsplitters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in the scientific industry for use as components within spectrophotometers and interferometer. For interferometry, beamsplitters are used to separate light into two beams to compare a reference against a sample. Cube beamsplitters offer some advantages over plate beamsplitters in that they don’t suffer from ghost images and are easier to mount. For more information read PDF…

"We offer multi-position cast iron motors to provide more flexible mounting solutions to customers. MULTI-POSITION CAST IRON MOTORS (OUR CODE: MF*HU) - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Heating class B - Multi-position with repositionable feet from size 160 to size 280 - Currently stocked in 2-4-6 poles - IE3/IE4 efficiency - All other options of the classic cage motors remain applicable"

Instead of mounting one or more Transporters to each die, the PSKS features one unit only – mounted directly to the face of the bolster. A heightadjustable mounting bracket allows flexible usage with multiple tools and dies. The only extra thing needed will be scrap trays in different sizes On the left and right end of the system, heightadjustable brackets with linear bearings support a crossmounted aluminum profile. The profile is fastened with standardized clamping brackets and will transfer the motion over the whole width Numerous trays can be mounted. Two rugged nylon Ushape clamps are permanently fastened to each of the trays. The fasteners are designed to slide and fit snug onto the aluminum profile so that exchanging of trays is just a matter of seconds. The length and width of the tray is determined by the size of the die slot.

Ball joint monitor mounting Even more degrees of freedom through a ball joint socket Feature: max. load capacity 10 kg (static) 60° free swivelling reducing bushes available (round 20 and 25mm, square 20mm)

11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm current and voltage output measurement accuracy ≤ 0.25% contactless signal transmission proven strain gauge technology built-in signal amplifier simple power supply universally applicable RPM measurement optional The new features: more versatile mounting options torsion shaft stainless mistake-proof installation oriented mounting large coupling selection The torque sensors of the DRBL series are a further development of our DRBK series and are suitable for use in the laboratory and for industrial environments with their compact dimensions and diverse mounting options. A factory calibration certificate with 25% increments (left, right) is included in the scope of delivery. The non-contact transmission of the measurement signal and the supply energy enables low-wear and m aintenance-free continuous operation.

The StrongLine operating pillars are aluminum (3 mm thick) welded columns, standard powder coated anthracite (RAL 7016), have a sturdy base plate. The StrongLine pillar is availlable in heights from 1.2 and 1.5 meters for vehicles, 1.8 meters for pedestrians and 2.4 meters for trucks. These operating pillar can be equipped with 1 or more cutouts for mounting hardware modules and feature a door on the backside for accessibility of the components.

Systems & Modules SMS designs, manufactures and supplies complete systems & modules for evaporation, drying and membrane applications. Our scope of supply includes: Consulting / Feasibility Studies Pilot Test Process Design Plant Engineering Project Management Procurement / Manufacturing / Delivery Erection / Installation Start-Up / Commissioning After-Sales Service Skid-Mounted Modules For more than 40 years SMS has been supplying skid-mounted units for the benifit of our customers. The skids are fully assembled, including piping, wiring and testing in the SMS Workshop or in our partners´ workshop. The modular design significantly reduces the required amount of work for assembly and start-up which minimizes the downtime of the existing plant equipment and - as a result - just minor effects occur on the current production.

aluNORM was developed to protect electrical or electronic components. Due to the large number of standard sizes in four variants, the maximum level of product variety is guaranteed. Typical ROLEC single-channel mounting combines the screw channel for attachment to the wall with the one for closing the enclosure. This provides more space in the interior for your internal mounting. An EMC version is available for the AS and AD variants. This is also available for the AF and AH variants in the dimensions marked. Fastening domes in the lid and bottom enable simple installation of supporting rails, mounting plates, circuit boards and more. Matching cable glands are also available.

n the micro and micro-drive sector, IAI offers small mini slider types that easily replace pneumatic cylinders due to their identical design and simple control mode. They are suitable for mounting fixtures, workpiece positioning, table motion and many other applications. In the RCP3 series, the smallest models are available as a slider types with sliding spindle. The latest developments are the space-saving mini slider types of the RCA2 series with 24 V servo motor.

This stainless steel rod, which is manufactured completely from stainless steel (Ø 42 mm), is used to install building components and (sub)structures on a roof surface. Our ABS UniMount is a flexible solution which can be used to install solar panels and photovoltaic modules, air conditioning systems and similar components. It can can either be installed on a concrete or steel surface. Base plate (130 x 130 mm) + welded-on mounting rod (Ø 42 mm) Female thread (M 10) at the top end For steel surfaces with a depth of at least 5 mm For horizontal and vertical loads of max. 3 kN Incl. stainless steel installation set

A HIGHLY EFFICIENT METHOD WITHOUT THE RISK OF WORK PIECES DAMAGING EACH OTHER Compared to standard mass finishing systems the newly developed M-TMD machine range finish high-value components 10 to 20 times more efficiently! By mounting the work pieces individually to workstations, which are part of a rotating carousel, you can process up to 18 work pieces in one single batch without risking part-on-part impingement. Different workstation angles - relative to their vertical position - allow the individual adaption of the machine parameters to your work pieces and guarantee absolutely stable finishing processes with excellent and repeatable results. APPLICATIONS: Orthopedic implants (medical engineering) Turbine blades (for airplanes as well stationary turbines) Precision components, for example, for pumps and compressors Work pieces made from tungsten carbide and other hard metals Fan wheels for turbo chargers (automotive industry) Sintered components, etc.

Zappshelter 3000 combines rapid, simple installation with tough, durable materials, resulting in a shelter solution that will protect what matters to you for many years to come. The need to reduce the effects of the weather on people, product and profit is driving demand for a self-installed Zappshelter product, and Zappshelter 3000 is satisfying customers all over the world. - Simple and rapid to build yourself or using our installation team - Instant undercover space - Easy to relocate - High tensile galvanised Ferroten® steel frame - Flame-retardant Taurinox® membrane cover - Can be mounted on virtually any surface - Range of widths and lengths - 10 year life-expectancy - Selection of standard colours - Add logos and branding to your cover

These wheels on 6-mm shaft are made of a combination of cloth flaps and High Performance Nonwoven material. To be used on straight grinders. Main features and benefits: Thanks to the abrasive cloth the scrubbing action of BIBIELLE shaft-mounted nonwoven wheels is more aggresive whilst ensuring high finishing quality, excellent user friendliness combined with highly efficient ventilation and low-noise levels typical of nonwoven products. Recommended applications: Light deburring and cleaning parts of irregular shape, pipes or moulded parts. Removing scale. Removing marks left by previous operations. Work surfaces: Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminium, cast iron, titanium.