Motor spindles - Import export

GMN high-speed spindles of the HS, HSX, HV-X and UHS series are irreplaceable for grinding work. Whether you must work with holes or frames, with these spindles you always make the right choice. The HV-X and HV-P series are optionally available with a rotational angle sensor, and therefore outstandingly suitable for 4Q operation. The types in the HV-P, HSP and HSP..g series are equipped with an HSK-C holder and furthermore suited for milling and drilling applications. GMN high-speed spindles of the HC, HCS, UHS, HCT series are an essential component of highly-effective machining of various materials. Whether aluminum, steel or titanium, these spindles are optimally designed for all machining tasks which require performance, torque and speed. Using an oil-air or grease permanent lubrication, the spindle bearings operate in a secure fashion.

GMN high-speed spindles of the HC, HCS, UHS, HCT series are an essential component of highly-effective machining of various materials. Whether aluminum, steel or titanium, these spindles are optimally designed for all machining tasks which require performance, torque and speed. Using an oil-air or grease permanent lubrication, the spindle bearings operate in a secure fashion.

Powerful, long-lived, precise: GMN motor spindles for manual or automatic tool change stand for quality and efficiency, and are well-suited to your grinding, milling, drilling or special applications.

GMN high-performance spindles with an integrated motor are designed for those applications and relevant installation situations in close collaboration with our customers. They are available as needed with a synchronous or asynchronous motor, for manual - HGS series - or automatic tool change - HGC, HGT series - and with oil-air or grease lubrication. Additional options are, for example, an AE sensor, vibration sensor or an automatic balancing system.

GMN high-speed spindles of the HS, HSX, HV-X and UHS series are irreplaceable for grinding work. Whether you must work with holes or frames, with these spindles you always make the right choice. The HV-X and HV-P series are optionally available with a rotational angle sensor, and therefore outstandingly suitable for 4Q operation. The types in the HV-P, HSP and HSP..g series are equipped with an HSK-C holder and furthermore suited for milling and drilling applications.

GMN high-speed spindles of the HV-P, HSP and HSP..g series are equipped with an HSK-C holder and suited for milling and drilling applications.

High performance simultaneous 5 axis machining center for aluminum structures Efficient high performance machining requires a rugged machine buildup without weakness. All technical parameters such as axis strokes, forces, torques and accelerations are set according to application requirements. The design of the STC X series has no bottleneck reducing the maximum possible material removal rates. With its design, unmatched productivity is possible. The STC X machine enhancement is ever ongoing. The goal is to continuously increase the customer benefits, i. e. increase productivity, increase accuracy or expand the application options.

DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv DryLin® N - Technical data DryLin® linear guide systems in the cleanroom DryLin® N - Applications DryLin® N - Design rules System selection & service life calculation NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. DryLin® N - Low profile linear guide system NK-02-17 DryLin® N - Low profile linear guide system NK-22-17-40 drylin® N - Low profile linear guide system NK-22-17-30 NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Rail made of anodized aluminum 2 Gliding elements made of iglidur® J or J200 3 Carriage made of chromated zinc or plastic 4 Carriage with threaded hole or through hole Advantages: Small installation height between 6 and 12 mm Lightweight Numerous carriage options – also with pretension Maintenance-free, self lubricating Corrossion-resistant Low wear with low coefficient of friction Rails in silver or black anodized When not to use ? When precision below 50 μ is required In high loads over 50 kg drylin® T drylin® R drylin® W When high resistance to chemicals is required drylin® W drylin® R DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv Standard, preload and floating bearing NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. 1. NW-01-27 standard 01 with through hole g 2. NW-02-27 standard 02 with threaded hole 3. Preload with through-hole or threaded hole 4. uinjection-molded with through-hole or threaded hole 5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung 6. NW-22-27-60P solid polymer carriage with through hole 7. NW-11-27-80 double carriage with through hole NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 1. Standard 02 with threaded hole 2. Injection-molded with threaded hole 3. Standard 01 with through hole NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P 1. Standard 02 with mounting nuts 2. Injection-molded with mounting nuts NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

The V shape of the shaft support is the result of purposeful internal development work at Föhrenbach. The most important advantage comes from having the greatest possible distance between the shafts and above all in the lay-out of the four ball-bearing housings whose loadbearing rows of balls are located underneath the shaft. The unitized, modular type like design realized with these devices enables to cover a wide range of application specific solutions. Manufactured in standard widths from 75 to 425 mm and in lenghts of up to 4000 mm, the products are designed to provide solutions that allow to cover almost all handling and mounting tasks that need to be met. An experience of long standing assures for competent solutions.

Type MR - roller bearing mounted slide /Typ MS - dovetail slides Positioning accuracy: 0,001 - 0,1 mm according to the spindle used and the feedback system Drive: Stepping or direct-current motors

Siegling Extremultus tangential belts have been optimized to suit the diverse range of yarn-manufacturing processes and different drive shapes. They play a major role in ensuring consistently high yarn quality and efficient production due to the following characteristics: superior abrasion-resistant coatings made of elastomer G or polyurethane with constant friction coefficients and long service lives; optimized surface pattern for the spindle and motor side; less belt creep and excellent levels of power transmission; energy-efficient polyester or aramide tension members; polyamide sheet tension members with good damping characteristics for high levels of effective pull; low-noise and low-vibration operation; antistatic finishes. Siegling Extremultus tangential belts are supplied as roll material, prepared for splicing or have already been spliced. With our splicing methods, homogeneous, reliable splices can be made efficiently while belts are still on the machinery.

Success is hidden in the bowl - the separator spindle. Powerful drive motors ensure high availability of the centrifuge. This efficiency combined with quiet running sets standards in separation technology worldwide. The soft-shot system, specially designed by Flottweg, performs acoustically hardly perceptible solids discharge. Depending on the customer's requirements, it can be set as desired whether partial or full discharges are to be carried out in order to achieve higher product yields. In addition, it is possible to set the discharge times to a tenth of a second.

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade Electronic material feeder, ball screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm

High-Performance automatic circular saw for aluminium and non-ferrous heavy metal Fully automatic operation Use of TCT or solid carbide blades ø 250 mm Motor 7,5KW, 400 V, 50 Hz, infinitely adjustable Blade feeder hydropneumatic Material feeder with ball screw spindle and servo motor 2-axis NC control Simatic S7-300 with 7“ touch screen Cutting range: height up to 60 mm, width up to 140 mm Manual safety cover 2x Ø 100 mm swarf extraction connector Blade feeder pneumatic hydraulic controled vertical top to down Manual blade feed adjustment to optimize the feed length Pneumatic clamps horizontal left and right of the blade Diagnosis of errors, trouble shooting Pneumatic clamps vertical left of the blade Mist spray blade lubrication (filling level controlled) 1 l tank Parts slide (Option: conveying belt) Material feeder from 2 – 650 mm with ball screw spindle and servo motor Multiple material feed possible up to 3250 mm cutting length Vertical and horizontal clamps Reducer of...

Transmission Shafts: These include counter shafts, line shafts, and overhead shafts. They are primarily used to transmit power between the source and the machine absorbing power. The transmission shafts are used to rotate the gears and provide mechanical power for various applications. Machine Shafts: These are an integral part of the machine itself. The best examples are the shafts used in motors and gearboxes. Spindle: A spindle is a type of shaft that is used to hold and drive work pieces in, for example, lathe machines. They are designed to withstand high torsional loads and are precision-made. Hollow Shafts: These shafts are similar to solid shafts but are hollow in the middle. They are used in applications where weight is a concern, as they are lighter than solid shafts of the same strength. Stepped Shafts: These shafts have different diameters in different sections. They are often used in machines where the shaft needs to perform different functions, requiri

SMALL ENGRAVING MACHINE The IS200 is designed for workshops and businesses. Its 3.14x8.85in unrestricted working area combined with a 0.007in flatness tolerance makes it easy to work with oversized items. Easily engrave wood, plastic, and metal plates with the wide range of spindles available. The IS200s' open structure allows you to mark small parts for traceability. COMPACT AND QUIET, METAL PLATE CUTTER With a footprint as small as 19.68x17.91in, the IS200 rotary engraving machine is the size of a desk printer. It is fitted with a remarkably quiet DC motorized spindle that will work in your environment. Whether you are in need of a professional sign making machine, a label engraver, a metal plate engraver for an company or an institution, create on-demand labels, badges, identification signs, instruction plates... PORTABLE ENGRAVING MACHINE Thanks to its 44lbs weight and its compact dimensions the IS200 is the perfect multi-purpose rotary engraving machine for portability.

used horizontal machining center, year of construction: 2008 Product name: MFZ 2-2 Update Used 2-spindle horizontal 5-axis machining center Year of construction: 2008 Sinumerik 840D Powerline control Machine dimensions without coolant system and chip conveyor L x W x H approx. 5.10m x 3.05m x 2.8m Weight approx. 20,000 kg (machine without coolant system and accessories) X-axis travel: 450 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 450 mm Rapid traverse XY Z axis 60,000mm/min 2 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm Spindle distance 450mm Chip conveyor Knoll (scratch belt conveyor in positioning variant across the machine) High-quality Knoll KSS system with fine filtration Flush gun Complete enclosure Tool storage (2 x 50 tools) Operating voltage 400V 3N ~ Control voltage 24V DC Connection value machine approx. 72 KVA Compressed air connection 6 bar

used, partially overhauled three-spindle, horizontal machining center Product name: MFZ 2-3 Update Machine number 53152 Used 3-spindle horizontal 4-axis machining center Year of construction: 2009 The machine produced until October 2020 Sinumerik 840D Powerline control X-axis travel: 300 mm Y-axis travel: 500 mm Z axis travel: 450 mm Spindle distance: 300 mm Rapid traverse XY Z-axis 60000mm/min 3 motor milling spindles GMN, version with HSK63 tool holder Drive power (S1 / S6) 28 KW (constant) Torque (S1 / S6) 63/83 Nm Maximum speed 16,000 rpm Chip conveyor Knoll (scraper belt conveyor in the setting across the machine) Knoll coolant system with paper belt filter Flushing gun • Complete housing Tool storage (3 x 30 tools) Operating voltage 400V 3N ~ Control voltage 24V DC

used horizontal machining center – year of construction: 2007-2008 Product name: MFZ 2-3 Update Used 3-spindle horizontal 4-axis machining center Year of manufacture: 2007-2008 Painted in RAL1002 (sand yellow) or red-white Sinumerik 840D Powerline control Machine dimensions without coolant system and chip conveyor L x W x H approx. 5.10m x 3.05m x 2.8m Weight approx. 20,000 kg (per machine without coolant system and accessories) X-axis travel: 300 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 300 mm Rapid traverse XY Z axis 60,000 mm/min 3 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm Chip conveyor Knoll (scratch belt conveyor in positioning variant across the machine) Knoll KSS system with paper belt filter and magnetic separator Flush gun Complete enclosure Tool storage (3 x 30 tools)

used horizontal machining center, year of construction: 2006, extensive manufacturer overhaul in 2021 Product name: MFZ 2-2 Update Used 2-spindle horizontal 5-axis machining center Year of construction: 2006 Extensive manufacturer overhaul 2021 Sinumerik 840D Powerline control Machine dimensions without coolant system and chip conveyor L x W x H approx. 5.10m x 3.05m x 2.8m Weight approx. 20,000 kg (machine without coolant system and accessories) X-axis travel: 450 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 450 mm Rapid traverse XY Z axis 60,000mm/min 2 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm KSM rotary union with electronic leakage monitoring Chip conveyor Knoll (scraper belt conveyor in positioning variant along the machine, ejection height 1,200mm)

Elegant and compact The system SL can be used for assembly tables, in assembly units, for office desks, height-adjustable beds and baths, and for general use in furniture construction and mechanical engineering. The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. Each leg has an internal motor that drives the threaded spindles. These are driven synchronously by the control unit. Accessories

Slim and compact The leg SM consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has an internal motor that drives the threaded spindles. Up to 3 spindle Lifting legs can be connected to one control box and are operated synchronous. The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

For spindle driven workplaces and tables Set up ergonomic workplaces for diffrent areas with the elegant spindle lifting column SL. It is used for assembly tables, in assembly systems, for mechanical engineering, height adjustable beds and massage tables. The column SL consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each column has an internal motor that drives the threaded spindles. These are driven synchronously by the control unit. The T-slots on 3 sides (width 8 mm) allow the connection of crossbars, shelves, attachments and mountings along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

The Double station CNC Panel Working Machinery specialized for machining aluminium composite panels. Also called in the market as ACP panels or ACM panels. The machine first grooves and then cuts the aluminium composite panels by using cutter bits using 2 high speed spindle motors, clamps the panels by vacuuming with a vacuum table and vacuuming pump, extracts the swarf coming out from the panel by a dust extraction system. Thanks to the double station working system, it is possible to load 2 different panels with lengths up to 3.200 mm each and while the machine is processing one of the panels, it is possible to load and offload the other panel in the other station. This machine has a 50% increased capacity compared to the single station machines. All axes are moving on linear guides and moved by servo motors with reducers controlled by a real CNC controller.

The CNC Panel Working Machinery specialized for machining aluminium composite panels. Also called in the market as ACP panels or ACM panels. The machine first grooves and then cuts the aluminium composite panels by using cutter bits using 2 high speed spindle motors, clamps the panels by vacuuming with a vaccum table and vacuuming pump, extracts the swarf coming out from the panel by a dust extraction system. All axes are moving on linear guides and moved by servo motors with reducers controlled by a real CNC controller. The machine can process light alloy materials such as: aluminium composite panels, HPL, aluminium panels up to 20 mm of wall thickness, bakelite, copper, acrylic, plexi-glass and etc. The machine has a very technologic vacuuming table made from plastic. The user does not need to isolate the table with gaskets like in the old system. The vacuuming is isolated inside the vacuuming system under the table and has a very high clamping force.

Machine Base Heavily ribbed cast iron structure for vibration-free performance. Adjustable slideways for wheelhead infeed and workhead traverse. Wheelhead Box type monobloc noted for its excellent vibration dampening characteristics. The precision motor grinding spindle is permanently sealed and lubricated. Workhead Located on a swivel plate which can be set to the required angular position by means of a wide-spaced scale. Collets for perfect valve alignment. Dressing Attachment The dressing attachment is permanently mounted on the worktable for rapid wheel dressing. Wet Grinding Coolant is delivered by an industrial type flood pump. The baffled coolant tank is easily removed from the machine base for cleaning. Electrical System Individual grinding spindle motor, work spindle motor and coolant pump motor all controlled by switches grouped in front of the wheelhead for ease of operation.

Machine Base Heavily ribbed cast iron structure with integrated dove tailed slideway for the workhead and steady rest. The machine base houses an industrial type flood pump for delivering coolant to the grinding site and a baffled drawer type coolant reservoir which can be drawn out for ease of cleaning. The machine base houses also the control panel for the motors. Grinding Spindle The permanently sealed and lubricated grinding spindle slides on a swivel plate which is provided with an integrated dove tailed slideway. The swivel plate is set to the desired valve angle by means of a wide spaced scale. Steady Rest An unique selfcentering steady rest is provided for additional support of long stem valves. Both the workhead and the stready rest are adjustable along the slideway on the machine base to clamp the valve on that part of the valve stem which normally travels in the valve guide.

PRODUCT INFORMATION It is designed to operate quickly and precisely lock’s holes on aluminum and PVC profile, without releasing the workpiece. Copy router with 1 vertical and 2 horizontal spindle motors ( 3 x 1.1 Kw 12.000RPM) Designed to perform quickly and precisely lock’s holes on 3 sides of the aluminum profile without releasing the workpiece Pneumatic 2 x horizontal and 2x vertical clamps Horizontal and vertical pneumatic tracers with 3 diameters Ø 5, Ø 8, Ø 10 mm Horizontal & vertical templates with standard figures for Aluminum and PVC profiles Smooth movement, high precision and great sensitivity provided with gas spring and ergonomic handles 1 m of roller support table at the right (with ruller) and left side Spray tool lubrication system OPTIONAL ACCESSORIES • Additional router bits with Ø5mm, Ø8mm and Ø 10mm • Additional collets with, Ø 8 and Ø10 • Special templates Videolar TECHNICAL SPECIFICATIONS 3x1.1 kw 1 P 230 V 50-60 Hz 6-8 Bar 8 lt./ min.