Milling grinding - Import export

We manufacture rough or fully machined segment liners for grinding mills in 15% leaded bronze

The CMB series hammer mills manufactured by our company are intended to crush and uniform fractions of dry bulk materials with moisture contents of up to 15% and destined for further technological processes. There is option to grind raw materials with higher moisture content, but this parameter has a very significant impact on the device performance. Depending on needs and purpose, CMB series hammer mills cay operate with capacity from 2 t/h to 10 t/h. The raw material is crushed by the impact of the hammers on the raw material and the raw material against the walls of the crushing chamber. The regularity and size of the resulting fraction is determined by the diameter of the holes in the screen used. We recommend collecting the crushed material from under the mill with pneumatic transport, as this enables the use of a pneumatic separator to sift out stones and other impurities that may cause explosions. The use of pneumatic transport will also increase the performance of the mill.

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding. It means that it is possible, in a single clamping, to carry out a full machining operation on the CONTUMAT VCE and not simply turning. The rigid cast construction on this lathe ensures low vibration and accurate cutting; hydrostatic guide rails damp vibrations even further. The technical design and numerous fitting options mean that Dörries is able to configure an individual machine to every customer.

This hammer mill grinds easily raw materials which are dry and lle dampens fine. For this reason it is used in food industry.The body is of steel and weld construction. The hammers are on the rotor which turn a mill. The rotormill turns in the strong ball thrust. The hammers are made of hardened steel.It is designed turn free.The sieve is on the hammer mill and it is changed easily without stopping the rotor. Motor is connected directly to the coupling. The body of hammer mill is mounted on the same chassis. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

Our expertised engineers and technicians use advanced equipments like multi-axis CNC machining,CNC Turning, CNC Turning&Milling Combination, Grinding, Wire Cutting, CNC auotmatic Lathing/Swiss Machining to turn your designs into reality quickly, accurately and at a competitive price.

Powerful, long-lived, precise: GMN motor spindles for manual or automatic tool change stand for quality and efficiency, and are well-suited to your grinding, milling, drilling or special applications.

Huan-tai has the comprehensive processing capacity rolling, welding, NDT, leak test, heat treating sandblasting, painting, lathing, milling, boring, grinding, wire cutting, drilling, assembling. Hongfeng has 70 sets of various types of machining include 12 units of CNC boring & milling machine 5 units of CNC lathe. Advanced and perfect testing method provide good protection for quality control. Huan-tai also has long-term cooperation of many kinds of outsource supplier, such as forging, casting, and plating. So Hongfeng has enough capacity to achieve in different industry .

The patented casting resin system ALWA MOULD D consists of two resin components and an aluminium filler. The fast curing of the material allows to produce your own technologically highest quality moulds in just a few hours. As our material is very good castable, compact moulds of any desired volume can be made from our product, such as acrylic baths, boats, etc. (<1 kg – 2500 kg). In comparison to other materials (e.g., glass fibre reinforced plastic), the system is more temperature-resistant, allows castings without air bubbles and does not have to be post-cured. Furthermore, the finished mould is easy machinable (e.g., drilling, milling, grinding, planning, sawing, turning, etc.). ALWA MOULD D moulds can be modified with repair filler, so that a fresh view can be created at an early stage of a new design process and prototypes can be examined at short notice.

These supports are placed under long or thin workpieces to prevent vibration or bending during milling, drilling, grinding or shaping operations. The support can be accurately placed without the need to reach under the workpiece. The support pin contacts the workpiece under light pressure. It can be tightened in any position. Various types of pins can be screwed into the tapped hole in the thrust pin to adapt the support height. The supports 02380-075, 02380-150 and 02380-170 have only 1 slot.

Huan-tai has the comprehensive processing capacity rolling, welding, NDT, leak test, heat treating sandblasting, painting, lathing, milling, boring, grinding, wire cutting, drilling, assembling. Hongfeng has 70 sets of various types of machining include 12 units of CNC boring & milling machine 5 units of CNC lathe. Advanced and perfect testing method provide good protection for quality control. Huan-tai also has long-term cooperation of many kinds of outsource supplier, such as forging, casting, and plating. So Hongfeng has enough capacity to achieve in different industry .

Huan-tai has the comprehensive processing capacity rolling, welding, NDT, leak test, heat treating sandblasting, painting, lathing, milling, boring, grinding, wire cutting, drilling, assembling. Hongfeng has 70 sets of various types of machining include 12 units of CNC boring & milling machine 5 units of CNC lathe. Advanced and perfect testing method provide good protection for quality control. Hongfeng also has long-term cooperation of many kinds of outsource supplier, such as forging, casting, and plating. So Huan-tai has enough capacity to achieve in different industry .

We also sell abrasives for all kinds of surface treatment: Grinding, roughing, milling, polishing. Special tools upon request. Systems: - M-quick - K-quick - ATAdisc - corundum(Plus) - zirconium (Z) - carboorundum - fleece rounds - felt rounds - super brade Ask for our abrasive catalogue or send us your detailed inquiry.

Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc. Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc.

Are you aware of our finishing options for metal and aluminum test specimens? Chemical degreasing, deburring, grinding, turning, milling, punching or blasting – no problem. Upon request, test specimens can be customized and labeled with serial numbers. Contact us to find out how we can help you. By the way: we can manufacture test specimens for the TABER-ABRASER from all kinds of metals.

Material: Carbon steel: S235JR, S355JR,C45 Stainless steel: SS303, SS304, SS316L Non-ferrous metal: Brass, Alu, Ti alloy Plastic: POM, PP, PE, ABS Process: Turning/Milling/CNC Boring/Drilling/Threading Grinding Application: Agricultural machinery General machinery Hydraulic cylinders Telecommunication

As form-fit power-transmission and conveying components, Siegling Proposition timing belts complement the established family of Siegling Transilon conveying and processing belts. Our vast experience in light materials handling guarantees superb product quality, in-depth support and fast service. Siegling Proposition high-efficiency timing belts are made of high-quality polyurethane with an embedded tension member made of steel cord or Kevlar. Thanks to their low mass and extreme tensile strength, they are quiet to operate and require virtually no maintenance. These characteristics make them ideal for demanding tasks like accelerating and braking, as well as for exact positioning. A wide range of coatings, patterns and profiles can be applied to standard timing belts. They can be modified even further by adding perforations, milling and grinding. As a result, the belts are true specialists when dealing with conveying, power-transmission or handling jobs. Product

Zirconium oxide jars 60 times the hardness of regular steel, highly wear-resistant and resistant to acid and solvents. The grinding jars are extensively applied to in the fields of Paint, Ink, Geology, Metallurgy, Electronics, Construction Material, Ceramics, Chemical Engineering, Light Industry, Medicine, Environmental Protection and so on. Each jar set includes grinding jar, jar lid, rubber sealing gasket and different sizes of mixed zirconium oxide grinding balls. Specification: .High cost-effective, low wear and long lifetime. .High specific gravity, high efficiency. .Highly wear resistant to acid and solvents. .Highly polished, smooth, easy to clean, low abrasion to the equipment. .High mechanical strength, good toughness, impact resistance, no broken beads. .Mainly used for lab planetary ball mill machines.

Zirconia Ball Mill /Beads / Grinding Media is made of good material and used advanced technology, which is suitable for any kinds of mills such as sand mill, attrition-mill, vibratory mill, ball mill and so on. It is used to grind and disperse the material of painting, dye,ink, titanium, electronic battery material, rare-earth material, nonmetal ore, calcium, pesticide, food stuff and medicine etc..Because of its high density, toughness and hardness, zirconium grinding media’s efficiency is much better than traditional ones.The high wear-resistant zirconium grinding media can not only prevent materials from being contaminated, but also prevent chemical erosion that affects its working life Sizes Ømm of the Zirconia ball mill grinding media : - 0.2-3mm,5mm,10mm,15mm,20mm Usage of the Zirconia ball mill grinding media: - Ø0.5-3mm Grinding ball use in sand mill - Ø5-20mm Grinding ball use in mix mill and ball mill - OverØ20mm Grinding ball use in ball mill

Cortec EcoLine® Cutting Fluid is a high-performance, eco-friendly metalworking fluid for various industrial applications. Made from renewable, bio-based ingredients, it offers superior lubrication, cooling, and corrosion protection.This chlorine, heavy metal-free formula is safer for workers and the environment.VpCI® technology provides excellent corrosion prevention.Ideal for milling, turning, drilling, grinding, and more. Suitable for carbon steel, stainless steel, aluminium, and copper alloys.Easy to maintain and dispose of safely. 

Our metalworking shop allows us to realize customized housings according to customer requests. A team of experienced employees assures the necessary precision including all required cutouts and drillings of housings. Our own tool shop is equipped with machines for lathing, milling, electrical discharge machining and grinding which allow us to quickly manufacture customized parts/adjustments in-house.

The Zirconia Ceramic Ball mill jar is one part of all kinds of grinding and mixing materials equipment. During the various types of ball mill jars, horizontal and planetary ball mill equipment are mostly used. Now let’s explore the differences between these two types of ball mill equipment so that you can select the right equipment for related application. Planetary sand mill equipment A planetary ball mill is an efficient ball mill equipment, its grinding principle is the grinding tank as a planet, through the interaction of the planet and the grinding ball, the grinding ball in the tank’s high-speed movement, and friction and collision with the sample or abrasive, to achieve the purpose of grinding. Planetary ball mill is suitable for the preparation of high-purity materials cell crushing and other fields, its biggest advantage is that the grinding efficiency is high, and the grinding particle size is adjustable.

The Customised manufacturing is performed in a 3000 sqm area. We offer a wide range of services: we construct and machine small, medium and large size components, from 10mm till 5200x3250x2700mm and we have a giant CMM to measure the big size: DEA ALPHA, Leitz X1 - 5000x2500x1800 mm. We have more than 30 machines in this facility (milling, CNC machining centres, grinding, lathes) and 2 Quality laboratories. The strength of this division is the design and manufacturing of fixtures and dedicated machines aiding manufacturing. The secret to our competitiveness is flexibility and high-quality services. For our customers nearby we can immediately replace the defective parts in their production lines. We have more than 15 years of experience providing this non-stop repair service. Founded in 1993, our company’s philosophy is to serve our clients and partners according to the highest standards, using the most up-to-date technologies.

The Customised manufacturing is performed in a 3000 sqm area. We offer a wide range of services: we construct and machine small, medium and large size components, from 10mm till 5200x3250x2700mm. We have more than 30 machines in this facility (milling, CNC machining centres, grinding, lathes) and 2 Quality laboratories. We have a painting, welding and heat (surface) treatment services. Our CMM machines are: DEA ALPHA, Leitz X1 scan, 5000 x 2500 x 1800 – with this one we can measure the biggest components what we produce. We deliver the report online to our customers. LEITZ REFERENCE, Leitz X5 scan, D200 with rotating table, 1500 x 900 x 700; LEITZ REFERENCE, Leitz X5 scan, 1500 x 900 x 700. All these machines are avialable for rent.

The Customised manufacturing is performed in a 3000 sqm area. We offer a wide range of services: we construct and machine small, medium and large size components, from 10mm till 5200x3250x2700mm and we have a giant CMM to measure the big size: DEA ALPHA, Leitz X1 - 5000x2500x1800 mm. We have more than 30 machines in this facility (milling, CNC machining centres, grinding, lathes) and 2 Quality laboratories. We have a painting, welding and heat (surface) treatment services. The strength of this division is the design and manufacturing of fixtures and dedicated machines aiding manufacturing. We can imagine, create and produce fixtures and we can assembly and test, even if this is hydraulic or pneumatic. We can perform electrical work as well.

Ming Xiao Manufacturing Co., Ltd is specialize in custom machine parts more than 20 years, we have various automatic lathe turning machines can produce small turned parts, especially produce steel pins with low cost and high speed. We have can do further machining and treatments for steel pins, such as milling, grinding, drilling & hardening treatments. Common materials for pins are 35 or 45 steel. The material of the safety pin is 35, 45, 50, T8A, T10A, etc., and the hardness after heat treatment is 30~36HRC. The pin sleeve material can be 45, 35SiMn, 40Cr, etc., and the hardness after heat treatment is 40~50HRC. Pins play a pivotal role in the connection of mechanical components. According to different shapes and functions, it can be divided into: split pin, tapered pin, cylindrical pin, grooved pin, dowel pins,coupling pins, etc. Among the pin products, cylindrical pins, tapered pins and split pins are commodity fasteners that are produced.

Ming Xiao Mfg is a professional machine parts manufacturer from China Ningbo, we are engaged in steel parts processing for 20 years, with a variety of processing equipment, to provide a variety of steel parts customized processing services. We provide a lof ot machining services, such as CNC turning, Automatic turning,CNC milling, Tool milling, dilling, grinding, wire cutting,colding forging, hot forging, die stamping, knurling,slot cutting,pressing,riveting.... In the past 20 years, we have processed all kinds of steel parts for domestic and foreign customers.such as tube couplings,steel shafts, pipe joint parts, hose connectors & transition connectors, copper machined tube, flange,bushing, knighthead, pedestal, customized screws,bolts, steel rods & steel pins... Our advantage is that according to the structure and use of parts, choose the lowest cost quality of the most reliable processing mode, improve the quality at the same time reduce the price of products.

OEM Forging Auto Parts OEM Forging Auto Parts Manufacturer Process precision forging+ blasting+ cnc machining (https//www.frimaparts.com/precisionmachiningparts2/) Material Aluminum , Brass (https//www.frimaparts.com/brassforgingparts/) , carbon steel, stainless steel, iron Machining turning, milling, drilling, grinding, threading, CNC Finishing sand blasting, polishing, plating, acid treatment, anodizing, coating Design customized samples or drawings are accepted Weight range 0.1100KG Packaging paper carton + bubble bag Delivery time tooling/sample within 4 weeks, batch order within 4 weeks. Inspection all the products are strictly inspected by QC. We develop custom products for clients all over the world, such as 3D Robotics, Nvidia, Smart Systems and so on. We are experienced in many processes, such as stamping (deep drawing, bending), cutting (pipe cutting, profile cutting,

We supply cnc machining, turning, milling, grinding service. Please feel free to send us your inquiry.

We almost have all the process in house, including machining(cnc milling, cnc turning, grinding), sheet metal fabrication(laser cutting, stamping, deep draw, bending, tube bending, welding). So we are very suitable for the production of finished products, assembly parts in house, which can have better price and better control on quality also.