Metal grid straighteners - Import export

Straightening press CDN400 with 3100x3000mm table and 1000mm stroke helps us finish our work with great precision.

Selfcentering of coils through continuously adjustable coil side guides Wideopening alligator type straightening head for easy threading From 5 to 13 individually adjustable straightening rollers to serve almost any demand on the quality of the straightening result Clockspring guard Drive via threephase servo motor; torque transmission simultaneously to all bottom straightening rollers, pinch rollers and cradle rollers

No coil expansion needed Selfcentering of coils through continuously adjustable coil side guides Wideopening alligator type straightening head for easy threading From 5 to 21 individually adjustable straightening rollers to serve any almost demand on the quality of the straightening result Drive via threephase servo motor; torque transmission simultaneously to all bottom straightening rollers, pinch rollers and cradle rollers Clockspring guard Allroll drive for straightening rollers Hydraulic hold down arm (optional w powered endwheel) Hydraulic threading system with snubber and peeler (optional w powered snubber wheel) Motorized coil guides Motorized straightening rollers Hydraulic opening / closing of straightening head Hard chromed rollers Edge guides adjustable to center via handwheel (optional motorized) Jobmemory feature for all motorized functions... etc

GSW FeederStraighteners, series VRMA are just as simply operated as our Straighteners of the RMA series. With servo drive and length measuring system they offer the additional functionality of material feeding (positioning) over just straightening. Their most common application is cuttolength and spacesaving coil feeding. The already revolutionary alligatorhead can be extended with hydraulic opening for full piloting when feeding into stamping presses with progressive dies. For especially heavygauge materials or high demands in flatness, our VRMZ series FeederStraighteners are the correct answer. They process crosssections as large as 2000 x 5,0 mm. up to 2000 mm material width and 16 mm thickness max crosssection approx.. 2000 x 5 mm or 650 x 10 mm max net output approx. 50 – 150 m/min max cycles with piloting approx.. 40 – 100 SPM

All rollers hardened and finepolished Multiple backup rollers to prevent deflection Specially suitable to feed highspeed stamping presses Parallel adjustment of upper roller bank with tilting via spindle type lifting devices With optional synchronized drive of pinch and work rollers Drive system via transfer gear box and universaljoint shafts with length compensation and quickrelease coupling Warpresistant stand in modular design to allow extension with catenary rollers, threading system, loop bridge or conveyors for operation as partsstraighteners etc. Hard chromed rollers Polyurethane coated rollers Hydraulic threading systems in different grades Motorized adjustment of upper roller bank with optional jobmemory Central edge guide adjustment via handwheel (optionally motorized) All roll drive Extricable and exchangable roller cartidges for easy maintenance Quickthreading feature for universaljoint shafts Movable base Manual or hydraulic loop bridge Conveyor belts... etc.

When straightening becomes core competence and strip or parts need to be completely removed of their tension, GSW Precision Straighteners are the answer of choice. They handle up to 2000mm wide and up to 6mm thick materials in strip or plate. Highest stiffness, closest centerdistances and the active driving of all rolls allow for perfect flatness results. Our newest development – the HighPerformance Straighteners, series RMB – answer questions raised thru current material development leading to increasing material strength, lessening thicknesses or the use of sandwich materials Their enormous stiffness, large pinch rolls and closest center distances evenly deliver highest straightening forces. If material surface quality must be fully preserved, the 6high design option is the right choice. Here, intermittent rolls prevent marking caused by the backup rolls and allow for a perfectly clean strip or plate.

High quality, extremely simple operation, unreached price/performance ratio For decades, the GSW Straighteners are valued all over the world. The Straightener with clamshell head (the GSW “AlligatorHead”) came out in 1968 – the RMA series – and today is being built in up to 2000mm width. This machine levels coil set and equals out tension with up to 12mm thick materials. It has given GSW a pioneer’s position in the industry. The RMZ series Straighteners convince where high straightening and pull forces are needed. Its frametype head design provides a high stiffness and elevates this technology to work with high demands in straightening quality – even with highertensile materials.

The straightening machine RM-1000 was developed for straightening deep-hole drills, as 4- and 6-axis version. The radial run-out of a drill is straightened using the 4-axis version. The 6-axis machine additionally corrects the camber of the shank and the head run-out of the soldered carbide drill bits. The maximum length of the drills is 1,000mm, the accuracy of the straightening process is 0.08 mm (depending on the work piece). An exportable straightening protocol is created for each straightening process. A robot cell is available as an option. Using this robot cell, the insertion and removal of the drills is performed. The robot cell is mobile and can be disconnected at any time in order to allow manual straightening processes.

For the majority of the resistor units manufactured by Schniewindt, the design is based on CSN® Resistor Webs. For manufacturing the resistor webs, resistive wires are woven meander shaped into temperature resistant insulation yarn. Besides the excellent high voltage strength and the typedependent low inductivity of the resistor webs, these webs are additionally suitable for high specific load operation due to the excellent convection conditions of the resistor web design. By selecting special high grade resistive alloys for manufacturing of the resistor webs, resistor units for operation under almost any environmental condition can be developed

Deformations that are created by utilizing thermal cutting process causes metal materials to lose their flat form. The materials which are cut by a laser, plasma or oxygen cutter that utilize thermal process can become almost impossible to be in a desired flat form again. This is no longer an issue with the new generation leveler technology. Our new generation leveler touches almost every point of the sheet metal material and can smart process. That way, stressed material can be straightened.

ZETAMAK Rim Straightening Machines with 5 ton power capacity of Hydraulic Pump, Molded flange, Lathe and necessary accessories / equipment are used to straighten defected rims made up of alloy, chrome, mag and sheet iron wheels from 10" to 30". - CE certified - All parts have a 2-year warranty. - High quality electric box and cabling. - Reliable Hydraulic system. - Spare Parts support with no charge. - If requested OEM production is also possible.

Expanded metal and micro-metal Expanded micro-metal has an enormous advantage in avoiding raveling. Standard matter: SS304, SS 316, Steel, Brass, Aluminum Micro-mesh from 80µm to 15 mm Building mesh from 15 to 200 mm Applications: Industries, automobile, heating, building, design and architecture. Metallic woven mesh Documentation All the woven mesh are available in rolls or cut panels. Standard matter: SS 304, SS 316, Steel, Brass, Aluminum… Square mesh from 20µm to 10 mm. Mesh reps from 3µm to 500µm Micro mesh SS316L, filtration limit minimum 1µm Uses: Industries, sieving, filtration, medical, design and decoration, …

For large drainage holes (from a diameter of about 40 mm) or in the case that the distance from the filter housing to the drain funnel is large, we recommend you an installation of our Rückspülgitter. Individual tabs from the backwash grid can removed individually. The FIBALON® – Backwash-Grid can simply insert into the funnel opening or can be attached to the tube. If it is necessary you can secure the backwash grid with a cable tie.For the best fitting of the whole vent tube, please remove all segments of the FIBALON® – Backwash-Grid.

ProcessLeveling And Residual Stress Relieve Material Thickness (mm)0,3-5 Maximum Material Width (mm)200 Minimum Material Length(mm)70 Quick Change System for Straightening Rollers- Flattening Gap AdjustmentElectromechanics/PC Control Overload Protection- ScreenTouch CE-CertificateStandard Machine Size (mm)1585x1585x1820 Total Weight (kg)2000

Can fit most of the cooker ovens Easily divides your oven Non-stick surface Long Life-span Heat resistant RoHS safe

DIMENSIONS ( PACKING)         Height.....................................            1520    mm       Length.....................................            1140   mm        Width......................................             800    mm        Gross  Weight...........................            380  Kg   MOTOR SPECIFICATIONS Mechanic  Motor.........................0,55 kw, 1400 rpm, 0,75 hp  - 7,3 Ampere 3 phase - single  phase //   380 V - 220 V Hydraulic Motor........................  0,75 kw 1400 rpm,  1 hp  -  8,7 Ampere 3 Phase - single  phase //  380 V - 220 V Sound Level.................................35 db

ProcessLeveling And Residual Stress Relieve Material Thickness (mm)1-28 Maximum Material Width (mm)1500 Minimum Material Length(mm)145 Quick Change System for Straightening RollersStandard Flattening Gap AdjustmentServo Hydraulic/PC Control Overload ProtectionStandard ScreenTouch CE-CertificateStandard Machine Size (mm)5200x7185x2260 Total Weight (kg)40000