• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • metal clamps

Results for

Metal clamps - Import export

Manufacturer/producer

China

Verified by Europages

This stamping brackets are made with carbon steel with 3.0mm thickness by blanking and bending, then powder coated in black with sandy texture, it will be fixed on both sides of the control body with M10 screws, then the whole body will be held on the agriculture machinery.

Request for a quote

India

Germany

Verified by Europages

The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

Request for a quote

Germany

Verified by Europages

Italy

Verified by Europages

Clamp for drums to install on the forks of the forklift. The clamp consists of a sturdy steel frame and fork mounted on a forklift. Operation: The connection and disconnection of the drum is automatic and the operator should not fall from the cart, simply push the caliper to the frame, apply light pressure and lift. The clamping device is extremely safe because it is constituted by a double hook, the release is done automatically by placing the drum to the floor. The trolley is suitable for lifting full drums, it is possible lifting the empty drums by pressing it over a pressure to hook the trolley. In the case of empty drums, a second operator must manually apply a pressure on the drum to enable the hooks to be activated.

Request for a quote

France

Verified by Europages

Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78

Request for a quote

China

Verified by Europages

NSPV single pipe clamp Single Hole Saddle Clamp Conduit Pipe Clip Metal F Type Clamp Simple Binding Pipe Clamp

Request for a quote

Germany

Verified by Europages

Stampling device for welding work ■ positioning, centering & clamping of metal part, with integrated part scanning The individuel customized solution will be performed according to customer specification!

Request for a quote

Germany

Verified by Europages

Potentiometric position transducer with very compact dimensions; robust design with metal flanges; sintered bronze plain bearing; long life span and high adjustement speed; easy to assemble via sliding metal mounting clamps; High protection class

Request for a quote

China

Verified by Europages

This metal bracket is called bucket, carrier or clamp, which is used on injection molding machine, to fix the digital display on the machinery body, many brackets or clamps are used to hold electronics or goods on the body or on the wall, the metal brackets / clamps can be "L"shape,"M"shape, "U"shape,etc, which are mainly formed by metal stamping, the material can be flexible like iron, steel, stainless steel, aluminum, spring steel.

Request for a quote

Germany

Verified by Europages

Safety Clamping for Rail Systems, Compact Holding force 300 N Small can clamp perfectly too: The LOCKED-Family SLK clamping elements are more compact than the Series SL. They also clamp directly onto the respective linear guide, suit all standard rail sizes from 15 to 55 mm and profiles from the known suppliers and are extremely reliable and safe. Thanks to the patented spring steel plate system, the product family SLK achieves clamping and holding forces of up to 2,100 N with the shortest reaction times when vented. Thanks to the sintered metal coatings and the clamping function in emergency stop (e.g. in case of a power failure), this range enables braking directly on the rail. All clamping elements offer the maximum holding and braking forces and achieve up to 1 million clamping cycles or up to a maximum of 500 emergency braking operations in the 4 and 6 bar version.

Request for a quote

Germany

Verified by Europages

We produce expansion joints for all industrial sectors to take up vibrations, for noise absorption, or to compensate distortion by axial, lateral or angular movements. Our expansion joints are available in various versions and numerous elastomers variants in inner diameters from 25 mm to 1600 mm. Testing certificates of all well-known testing institutes are at hand. TYPE II Single or multiple flutes with rubber/fabric flange. Various elastomers qualities. ND 32 to ND 1600, Standard length n 250, 300 und 350 mm, Standard pressure stage 10 bar. TYPE V and TYPE VII Single wave with rubber sealing bead. Various elastomers qualities. ND 32 to ND 600. Standard pressure stage 10 bar. TYPE V Standard length 100 mm TYPE VII Standard length 130 mm HKS and HKA Per heating standard DIN 4809. COUPLING EXPANSION JOINT Single or multiple flutes, in various elastomers qualities. ND 25 – ND 750, any length for pressures from –0,8 to +15 bar, with clamping band. RUBBER-METAL PIPE...

Request for a quote

Turkey

Verified by Europages

Aldea metal collector clamp is necessary for the proper and solid assembly of your collectors in underfloor heating installations.

Request for a quote

Germany

Verified by Europages

Metal Bellows Coupling with collet clamps, compact Backlash-free metal bellows coupling with compact clamp hubs For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 1400 Nm

Request for a quote

Germany

Verified by Europages

Metal Bellows Coupling with collet clamps Backlash-free metal bellows coupling with clamp hubs Hub material: up to 60Nm – aluminum, up from 80Nm - steel For shaft diameters from 10 – 80 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy to assemble Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 1400 Nm

Request for a quote

Germany

Verified by Europages

Miniature Metal Bellows Coupling with collet clamps Backlash-free miniature metal bellows coupling with clamp hubs For shaft diameters from 1 – 25mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy assembly with friction-locked clamp hubs Perfect bellows coupling for encoders, tachometers, potentiometers, servo drives, NC axis, stepper motors Torque range: 0,1 – 10Nm

Request for a quote

Germany

Verified by Europages

Metal Bellows Coupling with collet clamps / Hub material: aluminum Backlash-free metal bellows coupling with clamp hubs Hub material: aluminum Alternatively to steel executions we recommend our series KB4AL from size 80 - 500 For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy assembly and low inertia Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 500 Nm

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

China

Verified by Europages

China Ming Xiao Mfg is specialize in sheet metal Stamping services more than 20 years,have been customed many kinds of sheet metal stamping parts, puched parts,deep drawn parts for different industries.We providing relavent processes such as punching, bending, cutting, shearing, riveting, spinning, welding, deep drawing, etc. We are also have 6 sets different sizes progressive die stamping machines, can produce small metal stampings with high speed and low prices. suitable to high volume metal stamping components. Metal Stamping Parts Available Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc. CRS (cold rolling steel) sheet, HRS (hot rolling steel) sheet,hot-galvanize steel sheet (SGCC,SPCC,). stainless steel: 201,304,316... Aluminum alloy: 1060,2024, 3003,5052,6061,etc All standard brass and copper Finishs: Anodize,painting,powder coating,blackening,electroplatings of chrome/zinc/nickel /tin/silver...

Request for a quote

China

Verified by Europages

China Sheet Metal Stamping Parts Factory custom produce Aluminum,Carbon & Stainless Steel,Brass & Copper Stamping Parts as per customers’ drawing or samples. Have custom many kinds of metal stamping parts,such as sheet metal stamping clamps, metal seals, sheet metal brackets, sheet metal holder,console cover,sheet metal frames,spring clip, steel plates,shelf,Square/ Rectangular washers, metal stamped PCBA front Panel, pressed-in hole parts by PEM studs,nuts & fasteners, screw and pin welded stamping housings. Materials can be stainless steel,carbon steel,aluminum alloy,brass & copper,etc Finshing Operations: Forming, Bending,Deburring, Tapping,Riveting,Welding Surface Finish: zinc plating,chromed,nickel plating,oiled,painting,powder coating,hot-galvanizing,heat treatment & blackening,etc Mould Accuracy is 0.01mm-0.05mm We are professional metal stamping supplier from China, we custom sheet metal stamping parts for foreign customers more than 15 years.

Request for a quote

China

Verified by Europages

China Sheet Metal Stamping Parts Factory custom produce Aluminum,Carbon & Stainless Steel,Brass & Copper Stamping Parts as per customers’ drawing or samples. Have custom many kinds of metal stamping parts,such as sheet metal stamping clamps, metal seals, sheet metal brackets, sheet metal holder,console cover,sheet metal frames,spring clip, steel plates,shelf,Square/ Rectangular washers, metal stamped PCBA front Panel, pressed-in hole parts by PEM studs,nuts & fasteners, screw and pin welded stamping housings. Materials can be stainless steel,carbon steel,aluminum alloy,brass & copper,etc Finshing Operations: Forming, Bending,Deburring, Tapping,Riveting,Welding Surface Finish: zinc plating,chromed,nickel plating,oiled,painting,powder coating,hot-galvanizing,heat treatment & blackening,etc Mould Accuracy is 0.01mm-0.05mm We are professional metal stamping supplier from China, we custom sheet metal stamping parts for foreign customers more than 15 years.

Request for a quote

China

Verified by Europages

Ming Xiao Manufacturing Co., Ltd.is professional ISO9001 certificated Metal Parts Parts manufacturer, Located in China Ningbo,Specialize in Services of Sheet Metal Stamping,CNC Turning & Machining,Tube Bending, Cold forging & Hot Forging, and also can provide outsourcing services of laser cutting & Casting. We produce metal parts for various indstries,custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample,such as kinds of machined parts – metal shafts,steel rods, bushings, Sleeves, Flanges, tubes; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold forging parts,studs,bolts,screws,nuts,pins; steel wire forms and all kinds metal components. We provide a wide range of machining services, can satisfy the customer many types of products one-time order, for the customer to save a lot of trouble and costs for buy in different suppliers.

Request for a quote

Italy

Verified by Europages

The linear motion potentiometers series PR have a 26 mm diameter round section housing and 5 mm diameter shaft. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR for severe applications, even outdoors, at extreme temperatures. The potentiometer PR mounting method is extremely easy: it can be fixed by means of metal clamping brackets, or by the front screw thread. Several fittings are available: ball joint, self-aligning joint, feeler pin.

Request for a quote

Germany

▪ Type A with rounded ends ▪ Type B with rounded ends, elongated on one side ▪ Covering all standard metric and imperial diameters between 20 mm and 521 mm / .79 inch and 20.51 inch

Request for a quote

Germany

METAL SERVICE OUTLET Closed stainless steel service outlet Ideal for use in schools or public areas This service outlet is tough. Its carpet protection frame and hinged cover are made of stainless steel, while the installation frame and the solid, 3 mm thick pressure absorption plate in the cover are made of galvanized sheet steel. This makes the insert even more robust than the previous model with plastic base. The service outlet is ideally suited for use in schools or public areas, as its resistant material offers optimum protection against vandalism and the toughest use. The device casings for the installation of power, data and multimedia technology can be lowered by a maximum of 35 mm in the insert frame. Vandal-proof Grounding without PE wire High-quality stainless steel design

Request for a quote

Germany

METAL SERVICE OUTLET Closed stainless steel service outlet Ideal for use in schools or public areas This service outlet is tough. Its carpet protection frame and hinged cover are made of stainless steel, while the installation frame and the solid, 3 mm thick pressure absorption plate in the cover are made of galvanized sheet steel. This makes the insert even more robust than the previous model with plastic base. The service outlet is ideally suited for use in schools or public areas, as its resistant material offers optimum protection against vandalism and the toughest use. The device casings for the installation of power, data and multimedia technology can be lowered by a maximum of 35 mm in the insert frame. Vandal-proof Grounding without PE wire High-quality stainless steel design

Request for a quote

Germany

In many areas, stud welding is considered to be the most economic fastening method for components and is sometimes even the only technically feasible solution. Because the stud is joined with the substructure over the entire surface of the stud without any hollow areas, a high strength can be achieved. STAUFF is now using this proven principle for the installation of pipe, tube, hose and cable clamps in the Standard and Twin Series (according to DIN 3015, parts 1 and 3) with M6 mounting thread, where female threaded weld studs replace the regular weld plates; distance plates made from plastic provide the necessary spacing between the clamp bodies and the substructure. If required, the system can also be adopted for alternative fastening methods, e.g. for clamping belts, cable ties or corrugated cable protection hoses. In addition to the individual components – weld studs, distance plates, clamp bodies and metal hardware required – the company also provides the correspondingly...

Request for a quote

Germany

Backlash-free Metal Bellows Coupling Series PKA with clamping hub Series PKA with clamping hub Metal bellows made of stainless steel, hubs made of aluminum Backlash-free and torsional stiffness High-tensile pluggable hub High power performance Wear- and maintenance-free Axial pluggable Easy mounting and dismounting Technical Data T KN = Nominal torque M A = Tightening torque of retaining screws C y dyn = Dynamic torsional stiffness Cr = Radial spring stiffness Ca = Axial spring stiffness n max = Max. rotational speed V = Preload distance △Ka = Max. approved misalignment axial △Kw = Max. approved misalignment angular △Kr = Max. approved misalignment radial J = Moment of inertia

Request for a quote

Germany

Simply clamp this freely-rotating stainless steel anchorage point onto a rounded-edge seam without penetrating your roof surface. As it is only attached to one single seam, you can work with it irregardless of the seam distance. The standard package includes specially-designed aluminium clamps which you can install without having to penetrate the roof membrane. EN 795:2012, A + CEN/TS 16415:2013 Completely penetration-free installation Mounted on a single seam Aluminium depth ≥ 0.8 mm For BEMO and similar systems Incl. installation set

Request for a quote

Germany

Attach this stainless steel anchorage point to the rounded-edge seams of a metal roof using the clamps included in the package - completely penetration-free. Your surface only needs to be 0.7mm thick (aluminium) to install it and protect 3 individuals from falls. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm Aluminium thickness ≥ 0.7 mm For BEMO and similar systems Incl. installation set We also supply a protruding model for use in a lifeline system

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free