Results for
TECHNICIS FILTRATION
France
Filters made at our factory in Nantes (France) This filter uses the same principle than Standard Pleated Cardboard Filter with a polyester media sticked at the back in order to increase filtration efficiency for dry dusts. Advantages of this filter : - Lifetime up to 3-4 times longer than other filtering medias on the market - Better filtration efficiency than Standard Pleated Cardboard Filter - Easy installation and manipulation This filter can be used in all spray booths with horizontal and vertical airflow. Construction : This filter is made of 2 layers of recycled kraft paper, perforated, pleated and glued with a polyester media at the back. The quality of kraft paper (250g/m²) guaranties rigidity of the filter in all positions. Standard widths : - 1m - 0,90m - 0,75m Other dimensions and cuts on demand.
Request for a quoteANTHERMO GMBH
Germany
Heat recovery with the help of heat exchangers In industry, waste heat occurs at many points in the production process, which is often released into the environment without being used. In many cases, energy is even used to cool the waste heat flows from production so that they can be released into the environment. Heat exchangers (also called heat exchangers) are used for heat recovery so that the waste heat generated in the production process can be used again in the company. Gaseous or liquid media Waste heat can be in the form of gaseous media (e.g. warm exhaust air, steam, exhaust gases, etc.) or in the form of liquid media (e.g. hot water or other liquids). With the help of heat exchangers, the waste heat can be recovered from both gaseous and liquid media and then made available to the production process at a suitable point as energy in gaseous or liquid media. This process is known as energy recovery or also as heat recovery.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V HD-SR Industrywith circulation/flushing connection for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V HD-SR Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The double diaphragm pump is suitable for the food and pharmaceutical industry as well as for emptying drums, IBCs and tanks. * typical applications: liquid foodstuffs and semi-luxury food, pharmaceutical substances and cosmetic products * integrated muffler up to model size AODD 1 * FDA-compliant Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * ice-free air system * non-stalling operation * food-safe connections
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for thin, flammable and highly inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The eccentric worm-drive pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and compressed air motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Uniform volume flow * Gentle, low-pulsation product conveyance * Low wear and tear * Ideal for mobile use * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the exact measurement of the volume flow and measure thin to medium viscous media such as water and mineral oils precisely, quickly and above all efficiently. As an option, the desired quantity can be preselected with a quantity preselection (relay module), so that the pump or the system switches off automatically after the selected quantity.thus, the operation of the systems is simplified and secured even more. * Optional with volume preselection (relay module) * Media examples: Water, oil, diesel, heating oil, hydraulic oils etc. * Mobile on a Drum pump or with a nozzle connection or stationary in plant construction
Request for a quoteLUTZ PUMPEN GMBH
Germany
The flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in explosion-proof design * Examples of media: Paints, varnishes, mineral oils, acids, alkalis, mineral oils, solvents * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Touch screen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, paints, lacquers, mineral oils, solvents, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. The set is supplied without battery and charger * Replaceable, powerful battery with Li-Ion * Battery life approx. 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteFERPLAST SNC
Italy
The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller
Request for a quoteTEMAS GROUP EXPORT PARTNERS
Turkey
Our Website Development Service is a comprehensive package of services designed to help you create a professional and impressive website. We offer customized web solutions using the latest technology to meet the unique needs of our clients. Our Website Development Service involves an end-to-end process managed by an experienced team. It includes understanding your needs, design process, development, testing and finally going live. Our services are developed in accordance with the latest trends to deliver user-friendly interfaces, excellent user experience and powerful functionality.
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The industrial version of the progressive cavity pump HD-E-SR transfers the advantages of the drum pump to highly viscous media. With its easily detachable design and small outer diameter (max. 41 mm), it enables the filling of viscous liquids up to 30,000 mPas. The pump is easy to dismantle and clean and can be combined with electric or compressed air motors to facilitate the emptying of liquids and conserve resources. * Also available in special immersion depths * Examples of media: Oils, glucoses, waste oils, disposal liquids, * Optionally driven by electric or compressed air motors * Uniform volume flow * Lightweight and versatile due to low motor weight * Continuous, low-pulsation delivery of up to 15 litres/min * Low wear and tear * Easily detachable outer tube
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying aqueous and fatty food from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motorsareavailable , which can be combined with the Pump tubeat any time. This gives you flexibility at all times, thus saving important resources. * Horizontal connection on the bottom run of the container * Pump tube equipped with Lutz original hand wheel * also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Food grade connections * Low space requirement * Approved according to FDA and regulation (EG) 1935/2004
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency with innovative technology From Point-Of-Care (POC) diagnostics to large-scale automated lab-testing systems, our lateral flow media help manage sample flow quickly and efficiently. Containing highly customizable capillary action and developed using industry-leading manufacturing techniques, our portfolio of sample pads, conjugate pads, absorbent pads and waste pads: Improve test sensitivity, specificity and speed – Porex can engineer custom geometries, material formulations, and capillary structures, to enhance the performance and functionality of your test platform. Function with a wide range of sample types – Providing quick wicking, absorption, controlled delivery and precise collection of various samples including blood, serum, urine and saliva. Enhance both visual and physical indications–Diverse raw material options combined with proprietary manufacturing techniques enhance the surface energy and recovery of analytes, reduce viscosity and minimize...
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency with innovative technology From Point-Of-Care (POC) diagnostics to large-scale automated lab-testing systems, our lateral flow media help manage sample flow quickly and efficiently. Containing highly customizable capillary action and developed using industry-leading manufacturing techniques, our portfolio of sample pads, conjugate pads, absorbent pads and waste pads: Improve test sensitivity, specificity and speed – Porex can engineer custom geometries, material formulations, and capillary structures, to enhance the performance and functionality of your test platform. Function with a wide range of sample types – Providing quick wicking, absorption, controlled delivery and precise collection of various samples including blood, serum, urine and saliva. Enhance both visual and physical indications–Diverse raw material options combined with proprietary manufacturing techniques enhance the surface energy and recovery of analytes, reduce viscosity and minimize...
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency with innovative technology From Point-Of-Care (POC) diagnostics to large-scale automated lab-testing systems, our lateral flow media help manage sample flow quickly and efficiently. Containing highly customizable capillary action and developed using industry-leading manufacturing techniques, our portfolio of sample pads, conjugate pads, absorbent pads and waste pads: Improve test sensitivity, specificity and speed – Porex can engineer custom geometries, material formulations, and capillary structures, to enhance the performance and functionality of your test platform. Function with a wide range of sample types – Providing quick wicking, absorption, controlled delivery and precise collection of various samples including blood, serum, urine and saliva. Enhance both visual and physical indications–Diverse raw material options combined with proprietary manufacturing techniques enhance the surface energy and recovery of analytes, reduce viscosity and minimize...
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency with innovative technology From Point-Of-Care (POC) diagnostics to large-scale automated lab-testing systems, our lateral flow media help manage sample flow quickly and efficiently. Containing highly customizable capillary action and developed using industry-leading manufacturing techniques, our portfolio of sample pads, conjugate pads, absorbent pads and waste pads: Improve test sensitivity, specificity and speed – Porex can engineer custom geometries, material formulations, and capillary structures, to enhance the performance and functionality of your test platform. Function with a wide range of sample types – Providing quick wicking, absorption, controlled delivery and precise collection of various samples including blood, serum, urine and saliva. Enhance both visual and physical indications–Diverse raw material options combined with proprietary manufacturing techniques enhance the surface energy and recovery of analytes, reduce viscosity and minimize...
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This high performance computer-controlled machine provides maximum economic efficiency at treatment of big batch volumes at high throughput! The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. At any time, this machine is ready for upgrade to automated application, from the automatic loading & deloading of the machine up to a complete full automated feeding & forwarding system. For industry 4.0 demands, the E90 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible, too. Furthermore, this machine is able to perform cryogenic deburring without need of blasting media (drum-only deflashing), suitable for special applications only.
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This high performance computer-controlled machine is the optimal solution for mid-sized batch demands at fast throughput times! The E 40 is, like any of our machines, designed for high performance at low consumption of nitrogen, blasting media and electric energy. The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. For industry 4.0 demands, the E40 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control OPC-UA server is possible, too. Furthermore, this machine is able to perform cryogenic deburring without need of blasting media (drum only deflashing), suitable for special applications only. mid-sized batches > fast throughput times > E40
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This small sized computer controlled deflashing machine can be integrated into the production line easily. This saves temporary storage or extra transports and finally corresponding time loss and costs. The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. Alternatively the E30 is available with quick-exchange basket system. This basket is compatible to our high-pressure washing machine W30 and furthermore optimally suited for a linear in-line-processing →production →deflashing →washing →termpering, as this charge-baskets may be used compatible for each machine. For industry 4.0 demands, the E30 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible.
Request for a quoteResults for
Media - Import exportNumber of results
145 ProductsCountries
Company type
Category