Results for
NIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
CLube Linear Ball Spline MAG incorporates CLube in the IKO Ball Spline G. MAG is used primarily in semiconductor/liquid crystal related manufacturing equipment where harsh operating conditions and high acceleration/deceleration are common. CLube provides longterm, maintenance free operation, and reduces the cost of the whole system by eliminating the oil supply mechanism and reducing the running cost and hours required for lubrication.
Request for a quoteDEMAG CRANES & COMPONENTS GMBH
Germany
Demag frequency inverters ensure that your motors deliver the performance that you expect. We offer solutions for virtually all drive applications with our Dedrive Pro 880 and Dedrive Compact STO ranges, to meet even the most demanding requirements. Dedrive Pro 880 and Dedrive Compact STO provide optimum utilization of motor output for variable speed control. The starting current is limited and, at the same time, the motor and gearbox loads are reduced – any mechanical elements (including the crane girders and crane runway) are protected and loads are transported smoothly and gently.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
onnecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
RSLD is our short cut for a laser head consisting of a total of 3 motorized axes for use in large-format laser machines in gantry design for the 3-dimensional laser cutting of components. The horizontal main axis of the laser head permits endless movement, even during the rotary movement the axes below are permanently supplied with cooling water, process gases and all electrical signals. Suitable optics are used for the laser source used, either directly water-cooled metal mirrors with low-absorption coating or alternatively glass optics. The use of an adaptive optics enables the freely programmable focus position for cutting and piercing. The exclusive use of torque motors reduces mechanically moving components and thus guarantees consistently high machining accuracy and best machining results over a long service life, against mechanical damage reliably protects our proven 3D collision protection.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
RSD is our short name for a laser head consisting of a total of 2 motorized axes for use in large-format laser machines in gantry design for 3-dimensional laser cutting / laser welding of components. The horizontal main axis of the laser head permits endless movement, even during the rotary movement the axes below are permanently supplied with cooling water, process gases and all electrical signals. Suitable optics are used for the laser source used, either directly water-cooled metal mirrors with coatings of least absorption, or alternatively glass optics. The use of an adaptive optics optionally allows the freely programmable focus position for cutting and piercing. The exclusive use of torque motors reduces mechanically moving components and thus guarantees consistently high machining accuracy and best machining results over a long service life, against mechanical damage reliably protects our proven 3D collision protection.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
SD is our short cut for a laser head consisting of either the swivel axis only or in combination with a highly dynamic linear axis for laser processing of pipes. Suitable optics are used for the laser source used, either directly water-cooled metal mirrors with coatings of least absorption, or alternatively glass optics. The use of an adaptive optics optionally allows the freely programmable focus position for cutting and piercing. The exclusive use of torque motors reduces mechanically moving components and thus guarantees consistently high machining accuracy and best machining results over a long service life, against mechanical damage reliably protects our proven 3D collision protection. The clear aperture of the current laser swivel head SH35 is 35mm, the larger version SH60 is still available with a clear aperture of 60mm.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteWALLBED SYSTEMS LTD.
United Kingdom
This adjustable mechanism has a patented technical engineering advantage over any other wallbed mechanism now in use. The power of the SBLM-A mechanism is held in reserve until the panel bed face is in position - then the SBLM-A power pack is adjusted to bring the bed into perfect balance. This new lift mechanism is not intended to reduce the number of springs or the amount of power required to lift and balance the panel bed. Its unique design and ease of adjustment make the installation safer and simpler. TECHNICALLY ADVANCED MECHANISM: Better balance can be achieved by adjustment. Easier to add or reduce the number of springs. The user/installer is not required to manually arm the mechanism - it is all done by screw adjustment. Safer than other standard mechanisms.
Request for a quoteDISTINA
Ukraine
Shampoo with a set of strengthening components delicately and effectively cleanses hair and scalp. It has a conditioning effect to reduce mechanical damage and hair loss during combing. AnaGain™ (pea sprout extract) activates the growth phase of the hair follicle and prevents hair loss. Trichogen® VEG (a complex of amino acids, proteins, vitamins and plant extracts) prevents and reduces hair loss, strengthens and promotes hair growth. Ginseng extract promotes skin cell renewal. Capsicum extract enhances the microcirculation of the scalp, which stimulates the growth of new hair. Burdock root extract nourishes and stimulates hair growth. HOW TO USE: Apply to damp hair and scalp, massage, rinse thoroughly with water. Repeat if necessary.
Request for a quoteResults for
Mechanical reducer - Import exportNumber of results
48 ProductsCountries
Company type
Category