Materials testing equipment - Import export

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

Alpha Cabins (Determination of acoustic properties of materials) Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.

The zwickiLine testing machine is equally ideal for research and development as it is for routine quality assurance testing. Development and manufacture of the zwickiLine, including all mechanical, electronic, and software components—together with the comprehensive range of accessories — takes place at ZwickRoell's production facility in Germany, so all components work together seamlessly. Your benefits: - load range from 500 N up to 5 kN and with test-area heights from 565 mm to 1365 mm - Low weight, a small footprint and space-saving design - Suitable for tensile, compression, flexure and bending tests on different materials and components - Wide range of specimen grips and testing tools

Device details: ■ Device and operation according to the standard IEC 60811-504 ■ The complete set offers various spindles and cable guides with many diameters: Winding spindles: 10, 14, 18, 22, 28, 30, 35, 40, 45, 50 mm outer diameter Cable Guides: 4, 7, 9, 11, 13 mm inner diameter ■ Very robust and solid construction ■ Winding spindles interlock easily and guides are easily fastened ■ Device suitable for positioning in cold chamber ■ Maneuver Ratio: 2/1: 2x Crank rotation = 1x spindle rotation ■ Spindle/Guide diameter ratio: 0.8x sample diameter

The ideal system for individual testing situations and all applications. AllroundLine can be used for applications from all areas. A proven operating concept combined with flexible, modular load-frame design makes the AllroundLine an optimum solution for demanding testing applications, whether for quality control or for research projects. Development and manufacture of AllroundLine, including all mechanical, electronic, and software components—together with the comprehensive range of accessories—takes place at ZwickRoell's production facility in Germany, so all components work together seamlessly. Typical tests: - tensile test on metals (eg ISO 6892, ASTM E8), plastics (ISO 527), composites, rubber, ... - bending tests - flexure tests - shear tests - components tests

Safe, reliable and easy measurements of the exit speed made at the muzzle of firearms. Special design to be integrated into safe test rigs for material testing. Examples of application: Simulation of hailstorm on solar cells, simulation of stone-chipping on coated surfaces or on windscreens, examinations concerning the effect of projectiles on bulletproof vests, bulletproof doors and other security equipment. All models can be equipped with various possibilities to draw up test reports automatically.

The inspekt blue material testing machines were designed for standard and routine tests. These universal testing machines are used, among other things, in quality assurance and are characterised by a particularly attractive price/performance ratio. The inspekt blue is suitable for tensile tests, compression tests, peel tests and bending tests on various materials. In combination with the ergonomic design and the new brushless drive concept, a safe and fast measurement is guaranteed with simplest operation both in the rough production environment and in the sterile laboratory area. Main features: - innovative brushless drive without gear drive - reduced noise pollution due to low engine speed and optimized frequency range - freely selectable control of crosshead travel, force or elongation - high-precision force measurement by strain gauge force transducer - versatile adaptation of accessories and additional force transducers

For measuring mechanical properties of metallic materials

Device details: ■ Preparation of cable samples for further processing ■ Applicable for cable types with solid core cross-sections ■ E.g. Sample preparation for cutting with ORC family

Device details: ■ 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test ■ Robust and compact set including the device and an equipment case ■ Possibility to attach a thermometer directly near the sample ■ Measurement according to the standards IEC EN 60811-507 (Hot Set Test) and IEC EN 60811-508 (Heat Pressure Test) regarding sample attachment and weight attachment ■ Precise choice of weights due to practical containers ■ Simultaneous measurement of up to 3 samples Optional - Hot Set Test complete ■ Sample rack for heat pressure and heat elongation test ■ Laser gauge ■ Thermal heat oven UN55 Size (WxLxH): 585 x 514 x 784 mm (23 x 20.2 x 30.9“) Weight: 57 kg (125.6 lbs) Volumen: 53 l Air exchange rate: 8-20x ■ Thermal heat oven UN110 Size (WxLxH): 745 x 584 x 864 mm (29 x 23 x 34“) Weight: 74 kg (163 lbs) Volumen: 108 l Air exchange rate: 8-20x

The inspekt duo is a versatile two-spindle testing machine for test loads of 5 to 10 kN. It is a further development of the inspekt table blue series from Hegewald & Peschke. The inspekt duo machine series is ergonomically designed. Characteristic features include the large base plate, which allows the connection of peripheral devices such as extensometers, as well as the coupling of a tool tray and the equipment with protective doors. This guarantees use in harsh production environments as well as in sterile laboratories. The LabMaster materials testing software is available for fast and reliable evaluation of test results. As a cost-optimized table-top device of low weight, it is suitable for both simple and customer-specific tensile, compression and bending tests on a wide variety of materials, including wires, plastics, elastomers, paper, cardboard, food, hygiene articles, textiles, springs and wood.

Device details: ■ Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5 ■ Case set offers all required weights for the test ■ Easy operation ■ Very robust and solid construction ■ Steel impact piece included ■ Up to 3 Samples can be tested simultaneously ■ Device suitable for positioning in a cold chamber Options: ■ Cold Impact Test „one sample“ ■ Cold Impact Test „up to 3 samples“ ■ Cold Impact Test „1 x photovoltaics“ (VDE PV01:2008-02) ■ Laboratory freezer - technical specifications on request

The universal testing machine inspekt solo is a very lightweight testing machine, which has been designed for simple standard tests or customer-specific, more challenging tests. It stands out due to its convincing cost/performance ratio and the user-friendly manner of operation. In connection with the testing software LabMaster, inspekt solo universal testing machines can determine material characteristics of wires, foam plastics, elastomers, plastics, paper, cardboard, textiles, foodstuffs, and components in a quick and easy way. The Inspekt solo for test loads up to 2.5kN is a further development of the successful inspekt mini series for standard-compliant material and component testing in the low load range. In order to be able to better represent the wide range of requirements for this machine series, new technological possibilities have been exploited. Instead of DC motors, a new drive concept with stepper motors was developed - brushless, low-wear and noise-optimised.

The universal testing machine inspekt offers high-class mechanic precision, frame stiffness and modern control electronics. Customers also profit from the convincing cost/performance ratio. The top-quality, rugged machines can be used for almost any testing task. The size of the test room of the individual machines can be customized. It is also possible to add one or more test room. In combination with our user-friendly testing software LabMaster, standard-based and customer-specific tests can be easily implemented. Testing machine, testing software and our extensive range of accessories such as specimen grips and testing tools, extensometers or temperature control devices are optimally matched to each other and offer the ideal testing system for a wide variety of testing applications (tensile tests, compression tests, bending tests, peel tests,...). - Solid construction for highest measuring and control precision - Flexible design for versatile applications

Various test rigs: - Alternating bending test rig for seating furniture: seat/back rest load acc. to BIFMA X5.1, EN 581-2, EN 1335, EN 1728, BS 5459 - Double test rig for chair testing: seat and backrest tests, side-to-side tests and armrest tests according to EN 1335, EN 581-2, EN 1728, BIFMA X5.1, BIFMA X5.4, BIFMA X6.5, BS 5459 - Test rig for alternating bending tests of arm rests according to EN 1335, EN 1728, EN 581-2, DIN 4551, BIFMA X5.1 and BSI/BS 5459 - Portal drop test rig: testing of chairs, stools, tables, beds acc. to BIFMA X5.1, BIFMA X6.1, EN 581-2, EN747-2, EN 1728, EN 1730, ISO 7173, EN 12520, EN 14072 - Test bench for determining the stability of chairs in accordance with the standards EN 1022, EN 1729-2, EN 581-2, ISO 7174-2 and BIFMA X5.1 - Test rig for tilting drop tests at chairs according to DIN 68878/1 - Swivel test rig according to DIN 4551, EN1335, NEN 1812 and BIFMA X5.1

Ballistic Block Damping Bricks Ballistic Rubber Block Specially formulated with rubber supported by flame retardant chemicals. Due to the fact that rubber is produced by vulcanizing under high pressure and high temperature, the rubber is able to trap bullets much higher than its volume. The hardness of the produced blocks was adjusted to protect the projectile from splashing on the surface. Blocks on the side walls are produced in such a way that the projectiles do not bounce the bullet for interactive targets. It is designed to be used in Homeland Security, Military and Police Schools, Security and Special Protection Systems and in all shooting ranges.