Manual heat sealers - Import export

ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.

Impulse manual bag sealers machines FPS series are the simplest and most economical series of sealers machines. The model FPS-C is equipped with a cutter for trimming the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. This model is only available in sizes 300 and 400 mm. The sealers FPS/FPS-C are suited to a medium-low production and allow the closing of plastic bags without folding, with maximum thickness of 0.15 mm (0.30 mm total). The sealing is by impulse (the resistance heats for a few seconds) and can be adjusted by timer. The sealing cycle is generally 3 seconds and is indicated by an indicator light. These sealers has a sealing width of 2 mm.

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing.

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left.

Semiautomatic table top sealer with electric pedal and impulse sealing bar (resistance is heated for a few seconds), suitable for closing bags of plastic material heat-sealable. The closing of the sealing bars by pressing the pedal electric with solenoid allows the operator to have both hands free and for increased production, just select the automatic cycle with timed closure. The timers for adjusting the welding and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. Maximum thickness. weldable 0.20 mm. (0.40 mm. Overall)

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm).

ME SERIES HI - single bar 5 mm. (suitable for medium thick envelopes in PE, polypropylene, coupled light) Welders Series ME HI 5 mm with closure lever, allowing the sealing of heat sealable plastic bags with thickness up to 0.40 mm total. The models ME HC 5 mm are equipped with cutter for trimming of the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. The sealers ME HC are available in sizes 300, 400 and 500 mm. This series of sealers makes a sealing of 5 mm, very beautiful and suitable for food bags or if you want a more valid and robust sealing than the standard 2 mm. This sealers have a impulse sealing (resistance heats for a few seconds) and a timer for adjusting the sealing time. The sealing cycle is indicated by an indicator light. With manual sealing bar, sealing width 5 mm., Maximum thickness of 0.20 mm weldable. (mm. 0.40 total).

The benefits of induction technology in a capless sealing process. Successful sealing on both capless and non-screw-cap containers such as snap on caps is now possible with a pressure Sealer incorporating an Enercon Super Seal™ unit. Typically, pressure belt sealing is used to replace conduction sealing or to reduce the dwell-time needed in conduction sealing. Seals are either placed onto the capless containers or reside in the cap as inserted by the cap manufacturer. The capped container is then guided through the induction heating tunnel, where downward pressure is applied to the clip-on cap or foil by a non-metallic recirculating belt. This unique design automatically takes account of component variations and tolerances, such as bottle height variation, product overfill, line speed variation and bottle centres. Incorporates an Enercon Super Seal™ unit • Cap sizes up to 110mm diameter • Conveyor Speed up to 40 metres / minute

The Super Seal™ Auto Junior semi-automatic induction cap sealer offers the benefits of high-quality induction sealing to start-up operations, product validation and short production runs. The Enercon hand-held cap sealers deliver reliable, repeatable induction sealing and feature quality aids such as batch counters and no-foil indicators, which are often only found on inline production machines. The quality, reliability, and safety and support of Super Seal™ Auto Junior is the same as our high-volume inline production machines. Our hand-held machines are virtually maintenance free and seal continuously time after time for many years without fault. • Fully adjustable table-top stand • Diameter 20-63 mm • Digital timer • Missing foil indicator • 500W output • Dimensions 17.8mm W x 30.0mm D x 38.0 cm H

The Super Seal™ Junior manual induction cap sealer offers the benefits of high-quality induction sealing to start-up operations, product validation and short production runs. The Enercon hand-held cap sealers deliver reliable, repeatable induction sealing and feature quality aids such as batch counters and no-foil indicators, which are often only found on inline production machines. Our unique coil design facilitates the sealing of a wide range of caps including flat, sauce dispensing and conical caps, at diameters from 15 – 150mm. Other hand-held devices will only seal flat caps. The quality, reliability, and safety and support of the Super Seal™ Junior is the same as our high-volume inline production machines. Our hand-held machines are virtually maintenance free and seal continuously time after time for many years without fault. • Handheld and portable • Cap size 15-150 mm • Batch and foil counter • Digital timer • Missing foil indicator • 1KW output

The Super Seal™ Max is the fastest inline sealer on the market, with a dual coil it’s designed for high-speed packaging lines running at up to 100 metres per minute. This dual coil air-cooled induction cap sealer offers increased power and a multi-language touch screen for a simpler operation. It delivers reliable sealing with a diverse operating window that compensates for cap, liner and container tolerance variations. • Multiple language selection • Easy to use touch screen • Supervisory password protection with operator lockout • Recipe management • Internal monitoring of all critical operating data • Container, cap and foil counters available • Local and remote start/stop and power control • Stainless steel IP55 enclosure • Remote network control and monitoring via RS485 or Ethernet • Robust stainless steel fully adjustable stand for different container heights • Seals a variety of caps ranging from 20mm – 150mm • Fully compliant with all CE regulations

This single coil induction cap sealer offers users increased productivity, an easier set-up and more control. The easy-to-use touch screen is available in multiple languages. The Super Seal™ Touch is our most powerful compact single-coil machine and is designed for production lines running at up to 40 metres per minute. The air-cooled power pack is separate from the induction sealing coil. • Pre-programmed and fully integrated touch screen control for inspection and rejection • Remote start/stop and remote power control (auto start function available) • Password protection with operator lockout • High and low level set power alarm • Recipe management • Internal monitoring of all critical operating data • Diagnostic system information • Internal USB data port – Network connectivity available • Stainless steel IP55 enclosure • Robust stainless steel fully adjustable stand for different container heights • Seals a variety of caps ranging from 20mm – 150mm

Available in three models Super Seal™ 300 Super Seal™ 400 Super Seal™ 600 We have built on the proven design of the Super Seal™ range of induction cap sealers, to bring new features to give more value to packagers. The new Super Seal™ compact induction cap sealers are available in three power levels. There are a variety of sealing heads available to optimise sealing performance for your specific applications. •New display simplifies setup, operation & troubleshooting •Local/Remote modes for start/stop & power level •Seals a variety of caps ranging from 20 – 150m •System settings in a single level menu •High efficiency plug-in induction sealing coils to maximise performance and minimise energy costs •Compact and air-cooled •Power supply electronics are housed in an IP55 enclosure •Fully compliant with all UK and European regulations •Fully adjustable stainless-steel stand for different container heights

CF SERIES - CONSTANT TEMPERATURE HEAT SEALERS WITH PEDESTAL AND FOOT PEDAL ( for multi-layer bags) THE CF SERIES of constant heat sealers with pedestal and operated by foot pedal, are ideal for sealing bags made of compunds, multi-layer films, co-extruded films, OPP, heat-sealable cellophane. It is not suitable for polyethylene films. Being operated by foot pedal, the hands are free to feed the machine. The sealing jaws of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The temperature of the sealing jaws is adjustable according to the type and thickness of the material to be sealed, and is kept constant by a heat thermo-regulator. The maximum sealable thickness, that always varies according to the type of sealable material, is 0.25 mm. (50 mm. total). Also available in CFN version with timer and acoustic signal at the end of sealing.

The Star 66 free-standing sealer is designed specifically for sealing bags where the product is best standing upright. Typically, this lends itself to the bagging of bulk product such as aggregates, prepared foods and chemicals. The Star 66 is available in a range of formats to suit the product, working environment and bag type. The rugged, powder coated mild steel body is built to withstand the rigours of hostile working environments, such as builders' yards or coal merchants. The foot switch initiated solenoid jaw operation allows the operator to be preparing the next bag whilst one is being sealed. An IP65 stainless steel machine is available for food environments. Constant heat jaws for heavy weight foil and multi-wall bags are also available. For applications where seal quality is paramount, such as hygroscopic compounds, the Star MkVI C or ARTICS controller should be specified.

The Star 96 is available as a bench mounted or free-standing bag sealer, designed for sealing bags when the product can be laid down. The Star 96 is the industry standard, sealing a whole host of products ranging from pet bedding to pharmaceutical supplies. The Star 96 is solenoid operated as standard, with foot switch operation. The solenoids close the jaws and keep them closed for the duration of the weld and cool cycle, allowing the operator to prepare the next bag. If the machine is being used quickly, the Star MkVI timer board can be set to compensate the heat built up. A variety of product support tables and machines are available on request. Constant heat machines are available for special bag materials such as paper bags. For the sealing of medical and pharmaceutical products, the Star ARTICS controller can be specified to give unparalleled seal quality and consistency.

The Star Medical sealers have been developed for applications where ease of cleaning is critical, such as in the food, medical and pharmaceutical industries. The machine body can be built in a number of different designs with the jaws operating vertically (when a product is best sealed laying down) or horizontally (when a product is best sealed standing up). With the cylinders moving the top jaw directly, jaw alignment and pressure are much more controllable. This machine design is available with all the Star controllers. The Star Medical Vacuum sealer allows for the air to be removed from a bag prior to sealing. The machine is available with a range of vacuum pumps or vacuum generators dependant on your application. Gas flushing is available for modified atmosphere packaging. This machine design is available with either our ARTICS or Medical controllers.

The Star HM range are bag sealers designed for lighter gauges of materials. The impulse sealers are capable of sealing up to 250 µm (1000g). There is also a constant heat machine for laminates and complex materials. Both hand and foot operated machines are finished in painted mild steel. A stainless steel food shop counter top bag sealer and tube sealer are also available. The robust construction allows for years of service with a full spares and service back up. Removable sealing bars allow for ease of maintenance and replacement of consumable items.

The Star 56 range of bag sealers consists of a power pack and a set of sealing jaws designed for heat sealing products in situ or for a bag sealer to be incorporated into a parent machine. The range of sealing heads is ideal for uses such as sealing valve sacks, foil or plastic machinery covers and sealing straps onto bulk bags. We also produce a range for sealing dangerous/ toxic products where the seal incorporates a cut so no product can escape. Seal cycle initiation can be via foot switch, push button or automatic (when the jaws are closed). The power pack is connected to the jaws by a lead, allowing the jaws to be used in awkward positions. Adjustable weld and cool timers control the sealing cycle, allowing them to be used on most materials. The indicator lights on the power pack or sealing jaws advise the operator when the weld and cool cycle are complete. Special sealing heads producing shaped welds can be made for almost any application.

The Star Platen Sealer is available either bench-mounted or free-standing, producing shaped or multiple welds. The Star Platen Sealer can be manually or pneumatically operated with either foot switch or push button operation. The Star Platen Sealer can seal most modern plastic, biodegradable, foil, paper and laminate packaging materials and is constructed from anodised aluminium profile to give rigidity whilst keeping the weight down. The Star Platen Sealer is available with: A variety of seal shapes, sizes and widths Multiple seals can be produced at the same time Automatic cutter for a straight or shaped cut out A variety of jaw openings dependant on application Interchangeable sealing heads for different welds from the same machine Either one or both jaws heated A range of control options are available including the ARTICS and MkVI C controllers

• Provides a very large workspace on the desk • Can be easily mounted on the mobile table or desk, • A065 model Manual Roll Cutting Apparatus can be mounted on the stand. • Designed for 10GM and 20GM model Rotary Sealers in this case the device can operate. • On request (optional) Side Rack Set (A030) can be mounted on both sides of this stand. Pen Holder and Indicator drawer are included in the Side Rack Set • The stand is painted with a stainless furnace and the top is AISI 304 stainless steel. • Dimension (L x W x H) 750 x 303 x 248 mm • Weight 5 Kg