Manual applicator - Import export

The perfect solution for manual labeling - Simple, fast and practical: A variety of optional modules for any labeling task. Based on the successful HERMA basic model, our entry-level automatic applicator. The ideal solution for simple applications with manual label dispensing. Simply dispense the current label and the next is supplied automatically. Easy to integrate a variety of printing systems. User-friendly thanks to the integrated display and control panel.

Industrial mortar composed of cement, marble aggregates and special additives that reduce water absorption and permeability and give it optimum fluidity for manual and mechanical application, for daily use.

Industrial mortar composed of cement, marble aggregates and special additives which give it optimum fluidity for manual and mechanical application, for daily use.

TECHNICAL DEFINITION White, matt, ready-to-use thin finishing plaster to level interior substrates. Ideal plaster for renovating uneven or textured substrates. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates: concrete, cellular concrete, cement, breeze, brick, plasterboard, plaster tiles, plaster, old paint, glass canvas, old droplets, glass fibre cloth, old droplets. TECHNICAL PROPERTIES • Density : 1.3 • Dry extract : 66% • Fire classification : A2s1d0 STORAGE 18 months in original unopened packaging away from frost and high temperatures. APPLICATION Manual application : with a trowel or filling knife. Mechanical application : airless spray, spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 60 cm from the substrate.

TECHNICAL DEFINITION Interior finishing plaster. Can be used with Airless spray. It provides a fine, uniform and even finish and is easy to sand. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. The resulting paste is off-white in colour. COVERINGS Primer coat, paint, wall coverings. TECHNICAL PROPERTIES • Density : 1.8 • Dry extract : 73% STORAGE 18 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES. Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. Scrape, brush and remove dust from concrete, plasterboard and plaster tiles. APPLICATION Manual application : With a trowel or filling knife. Mechanical application : Airless and spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 80 cm from the substrate.

TECHNICAL DETAILS Paste coating for a good finish on interior walls and ceilings. Provides excellent surface preparation before painting or hanging coverings. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating. The paste is white in colour. COVERINGS • Wallpaper • Paint • Wall covering SUITABLE SURFACES Interior walls and ceilings • Plasterboards • Plaster tiles • Concrete • Cement coating TECHNICAL CHARACTERISTICS • Density of paste : 1.9 • Granulometry : fine • pH : 7 Adhesion : complies with NFT 30 608 PACK SIZE 4 and 10 kg buckets on shrink-wrapped pallet. APPLICATION Apply manually using a smoothing trowel or a filling knife. The maximum thickness will be 2 mm per coat. Allow to harden and remove imperfections before sanding, if necessary. Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint. Clean tools in water.

TECHNICAL DEFINITION Ready mixed filler for interior and exterior finishing work on walls and ceilings OSCAR is a water based filler giving a finish identical to oil based products. COMPOSITION AND APPEARANCE Resin emulsion containing calcium carbonate, rheological agent and various additives. The resulting paste is white. ACCEPTED SUBSTRATES Interior walls and ceilings • Plasterboard • Old paint • Plaster blocks • Primers Outside walls • Smooth concrete • Fine floated cement SUITABLE SURFACES • Wallpaper • Paint • Wall coverings • Thick plastic covering (RPE) TECHNICAL CHARACTERISTICS • Paste density : 1.9 • Particle size : very fine • pH : 7 APPLICATION Application is manual using a float or a painter’s knife. The maximum thickness will be 1 mm per coat. Smooth and sand if necessary before OSCAR has entirely set. Clean tools with water.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates. SEMIN HIGH BUILD FILLER has very good filling properties. SUITABLE SURFACES All types of interior surfaces: bubbled concrete, untreated concrete, cellular concrete, irregular plaster, heating ceiling, terracotta tiles, uneven substrates... Covering After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper paste, wall coverings. REFERENCE DOCUMENTS • Filler complies with standard NFT 30 608 • DTU 59.1 : painting work • Technical notice CSTB N°9/99-681 TECHNICAL CHARACTERISTICS • Granulometry : up to 0.5 mm • Adhesion : complies with NFT 30 608 • pH : neutral • Usage time for batch : 24 hours PACK SIZE 25 kg bags on shrink-wrapped pallet. APPLICATION May be applied manually with a smoothing trowel or coating blade, or mechanically by spraying then manual smoothing. THICKNESS OF APPLICATION Up to 5 mm in one pass.

TECHNICAL DEFINITION Extra-fine finishing filler in powder form for all types of interior jobs. The substrate is now ready to be decorated with paint, wallpaper or any wall covering. COMPOSITION AND APPEARANCE Calcium carbonate, redispersible resin, rheological agent and various additives. Produces a white paste. SUITABLE SURFACES • Wallpaper • paint • wall covering • Plasterboards • Concrete • Old paint • Plaster-based high build filler • Plaster blocks • Cement render • Undercoat TECHNICAL CHARACTERISTICS • Setting time : >24hrs (drying filler) • Powder’s density : 0.8 • Grain size : very fine • pH : 7 • Adhesion : complies with standard NFT 30 608 MIXING FACTOR Use approximately 11-12 litres of water for one 25 kg bag. Allow the paste to rest for 15 min before use. APPLICATION Apply either manually with a steel trowel or a putty knife, or mechanically. Allow to harden and scrape off any possible imperfection before sanding down.

COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightening fillers, preservatives and various adjuvants. The resulting paste is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Smoothing coating. TECHNICAL CHARACTERISTICS - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 1.2 STORAGE 9 months in original unopened packaging, protected from frost and heat. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings). The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip in place. Then carry out a finishing pass, let dry and finish to mask the strip. For vertical protruding corners, use a reinforced strip or a metal angle iron.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Smoothing coating. TECHNICAL SPECIFICATIONS - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 1.7 - Reaction to fire: A2s1d0 MIXING RATIO 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads. Apply a strip by picking up the ceiling, making sure that the concrete is free of any trace of form oil.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: setting by drying - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 0.8 STORAGE 9 months in original unopened packaging protected from humidity. MIXING RATIO 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 8 hours - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. MIXING RATIO 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 4 hours - Adhesion of the tape: > 1000 g - Density: 0.9 - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. RATE OF MIXING 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 2 hours - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick STORAGE 9 months in original unopened packaging protected from humidity APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. ADMITTED SUPPORTS All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 1/2 hour - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 0.9 - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. SURFACE PREPARATION The plasterboards will be fixed in accordance with DTU 25.42. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. (Grinded face against the plaster).

Brass grommet and teeth washer provide rugged and unyielding setting for a wide variety of applications. Manual, semi automatic and fully automatic grommet setting machines easily set grommets and plain washers ensuring installation runs smoothly and efficiently. This multipurpose grommet and washer combination can be used in a variety of materials including industrial fabrics, canvas, leather and heavy duty vinyl tarps, as long as a hole has been pre punched in the material. Please take a look to the chart in order to find the dimensions you need for every size and finishes of sheet metal grommet and teeth washer manufactured by Micron America.

These can be designed for a wide variety of objects and applications for manual operation or as fully automated systems. In certain applications the combination of both types of solutions is also possible. Another possibility is a modular approach, which allows the customer to expand the capacities and the technical level later on according to his current needs. Individual stations can be connected by a conveyor belt system, or the parts can be transferred manually.

New battery strapping tool GT ONE ECO with adjustable operating mode according to the application: manual or soft for delicate products. The insertion of the strap is simple and fast and you simply have to press a button to get the tension and the vibration welding (heating by friction). The strapping tool is perfectly balanced, it can be used for vertical and horizontal strappings. It is equipped with a latest generation brushless motor driven by a lithium battery and with a digital display that shows all useful parameters (tension, welding time and battery charge level).

Whether as a Windows® printer or part of a system network, the robust, stainless steel GLP-58 thermal printer impresses with its fast, reliable handling and multifunctionality. In combination with a range of Bizerba labeling systems, checkweighers and industrial terminals, it offers a wide variety of potential applications - both in manual labeling and statistical work. The label printer GLP 58-K on the ST terminal allows printing of up to three barcodes. It is possible to use not only standardized printing images but also custom layouts. The Windows® printer driver can be used to print out labels created using Windows® applications and the Bizerba Label Designer (BLD).

Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators

Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators

Application: » professional brightening treatments » manual application » during (micro-needle and needleless) mesotherapy and sonophoresis » after IPL and laser therapies » possible combination with UniTone Forte-C Elixir

Transform HA® Serum 9% of active substances: VECTICELL™ HA, Glycohyal LW » innovative formula » high concentration of pure hyaluronic acid » lipo-gel consistency » comfort of application » optimal absorption time » feeling of velvet skin Use: » micro-needle/fractional therapy (roller, stamp) » manual application after intense treatments: needleless mesotherapy » sonophoresis

PRP Serum 5% of active substances: W3 Peptide, GHK-Cu peptide, Chia oil »» plasma-lift effect »» guarantees silky skin »» maximally recommended peptide dose »» lipophilic formula »» intensive penetration Use: »» professional PRP-like procedures »» microneedle and no-needle mesotherapy, sonophoresis and manual applications »» procedure areas: face, head skin and body

Intelligent liposerum formula maximum concentration of active substances deep penetration thanks to liposomes gradual release and long-term activity efficient consistency Application: manual and instrumental applications microneedle and needleless mesotherapy

Contains shikimic acids with antibacterial and exfoliating properties. It regulates work of sebaceous glands. Salicylic acid prevents outbreak of new acne blemishes and facilitates the healing of lesions. Affipore™ – barosma betulina leaf extract reduces sebum secretion and the appearance of pore openings. Can be used with manual application and sono and iontophoresis.

Intelligent activity formula contains a maximum dose of Quora Noni PRCF light and efficient consistency Application: manual and instrumental applications microneedle and needleless mesotherapy after manual and cavitation cleansing after acid peels

V Zone Serum Progeline™ 10 mg/g, Xymilene® 20 mg/g, Arginine 5 mg/g » maximum concentration of active substances » original combination of ingredients » lipophilic formula » active penetration Application: » treatments modelling facial contours and improving “V” line » (micro-needle and needleless) mesotherapy » sonophoresis » manual applications