Results for
DELTAFLUID
France
Instrumentation accessory for setting and commissioning the measuring instrument A manifold is mounted to the interface between the pressure taps and the transmitter. It is used to isolate the transmitter in case of intervention on the pipe. It also allows you to reset the zero of the transmitter or purge the impulse taps.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
With one inlet and multiple delivery ports, distribute the compressed air from the air compressors across the pneumatic circuit of the vehicle. Typically chassis mounted 24V IP67 Compliant
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
EPP manifold boxes are used for heat recovery ventilation (MVHR). Due to EPP's insulating properties, MVHR manifolds do not need to be insulated. Manifold boxes are intended to distribute 75mm ducting around the house. The number of connectors varies based on the specifications of the user: 4-18 spigots.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite thanks to the insulating properties of EPP. Manifold boxes are designed for distribution of 75mm semi-rigid ducting around. The number of connectors varies depending on the user's specifications: 6-13 connection spigots.
Request for a quoteTURKOGLU
Turkey
Distribution Manifold with Valve (Economic) - PATENTED ** / Body : Brass (CW617N) / Connection : Threaded ( Inner ) / Valve : Included / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar / Centers Distance : 26 mm / Size : 1'' *** Application Areas : Hot and Cold Water Systems
Request for a quoteTURKOGLU
Turkey
Distribution Manifold with Mini Valve ** / Body : Brass (CW617N) / Connection : Threaded ( Inner ) / Valve : Included / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar / Size : 1'' *** Application Areas : Hot and Cold Water Systems
Request for a quoteTURKOGLU
Turkey
Distribution Manifold with Valve ** / Body : Brass (CW617N) / Connection : Threaded ( Inner ) / Valve : Included / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar / Size : 3/4'' - 1'' - 1 1/4'' *** Application Areas : Hot and Cold Water Systems
Request for a quoteMURAT AUTOMOTIVE
Turkey
ME014925 ME018369 FE659-FE515-FE519-FE-635-FE-639-PRESTIJ 98->>
Request for a quoteEM-TECHNIK GMBH
Germany
The new 8C compact manifold is especially impressive for its small size. In the single-sided version it can have 2 - 5 outlets, in the double-sided version 2, 6, 8, or 10 outlets. The outlets can be designed to customer specification either with integrated connections for flexible tubes series 1+ in sizes DN04/06 or DN06/08, or with threads G1/8" or G1/4". The side endpieces (input/output) of the manifold can be sealed or fitted with G3/8" or G1/2" threads.
Request for a quoteEM-TECHNIK GMBH
Germany
The 8B standard manifolds in various designs and materials. Due to the special design, several manifolds can be easily connected in series. Depending on the application, the media can be either distributed directly or shut off as required using the appropriate fittings.
Request for a quoteAKNAR AUTO AND DEFENCE
Turkey
Intake and exhaust Manifold Mercedes Man Volvo Daf Scania Renault Iveco
Request for a quoteKAS - KAYALAR GROUP
Turkey
1” 1/4 Manifold Completed Type
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Compact valve manifolds with low piping effort, reduced maintenance time and minimize investment costs. A connection system well known from the field of hydraulics and adapted to the respective application, allows for the intelligent combination of several valves in a customerspecific manifold. All necessary connections between the individual process valves are integrated in the manifold.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NINGBO TOWER INDUSTRY CO.,LTD
China
All of our products are customized by customer's drawing. Please feel free to send us your inquiry.
Request for a quoteGLORI IR KO, UAB
Lithuania
Manifold boxes are made of galvanizes sheet metal and painted using powder coating technology.
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences NSF H1-registered
Request for a quoteFRIEDR. FREEK GMBH
Germany
Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.
Request for a quoteFRIEDR. FREEK GMBH
Germany
Square stainless steel tubular heaters BASE-flex (1.4541) are a reliable industry standard for the use in heating platens and manifolds. In contrast to traditional tubular heaters with a round section which have to be bent by machines, square BASE-flex can be fitted into any rectangular groove with simple hand tools. Moreover, the square shape results in a bigger heat emitting area of up to 80% compared with a corresponding round section. Finally, the easy manual mounting saves the usually high technical expenditure for casting-in / soldering / cementing of bent round tubular heaters. A soft version of the BASE-flex, the NICKEL-flex (2.4068) is available as special execution. Due to the soft, easy to form nickel material, the NICKEL-flex is suitable for manual mounting with hand tools in round sections, too. Furthermore, Nickel has a better capability to conduct heat compared with stainless steel.
Request for a quoteFRIEDR. FREEK GMBH
Germany
HotCoils have a larger cross-sectional area and are thus capable of greater power than MicroCoils. For this reason they are used in hot runners with adequate space and where high heat densities are required. Owing to the large number of variants and for cost reasons, the sheath material for HotCoils is stainless steel - the standard for the market and thus also for Freek. HotCoils are large enough that thermocouples can be integrated into them. Our standard here is Type J (Fe-CuNi; red/blue), while Types J and K are also available conforming to the IEC and ANSI standards (see colour codes). Since the measurement point of a built-in temperature sensor is situated in the heater and never where the heat is actually required, a HotCoil with a thermocouple makes particular sense where the application allows the use of larger processing (temperature) windows or where the installation location or the design requires protection against overheating.
Request for a quoteGLOBAL GASES GROUP THAI CO LTD
Thailand
Mastercool 59161 - R410A. R22, R404A 2-Way 3rass Manifold Gauge Set, 3 1/8’* Gauges, 3-60" HosesR410A Brass 2-Way Manifold Gauge Set with 3-60in(152cm) hoses with standard 1/4in fittings/gauge size 3 1/8in.Mastercool is the leading manufacturer of professional quality A/C manifold gauge sets. Our manifold gauge sets are constructed of the finest materials ard machined with precision to the highest quality standards. At Mastercool, every manifold we ouild is ouilt to last.
Request for a quoteGLOBAL GASES GROUP THAI CO LTD
Thailand
3-way air conditioning diagnostic manifold gauge set for R4043, R410a. R22 refrigerants. Designed for AC charging, diagnostic check and recovery workComplete diagnostic and service gauge set for use on air condition systems (home or automotive)Manifold gauge set is designed to meet 1/2" Standard SAE requirements for refrigerant permutationInclude 3-PC SFT extra long Freon charging hose, 3 color fcr easily recognition, red for high pressure. Plue for low pressure, yellow fcr refrigerant PottleThe solid brass gauge threaded connector and hose fitting is different from the Prass plated construction, corrosion-resistant and rustless, can oe used for many years
Request for a quoteResults for
Manifolds - Import exportNumber of results
70 ProductsCountries
Company type
Category