Magnetic sheets - Import export

Designed and manufactured in Sheffield, warmroom® is our patented magnetic heat saver, which reduces heat loss, carbon emissions and heating costs. Tests conducted by Sheffield University have shown warmroom® can reduce the heat lost through walls by up to 60% whilst simultaneously lowering carbon emissions by 19kg/m² per year. warmroom® consists of an aluminium heat shield bonded to a high performing flexible magnetic sheet which allows it to adhere to the rear of steel radiators. The low emissivity of the aluminium inhibits the transfer of heat, preventing it from reaching the wall, and the magnetic element means radiators do not need to be removed, facilitating quick and easy installation by tenants and residents, resulting in no installation costs, unlike other heat saving products, making it a cost-effective alternative or companion to other forms of insulation.

Our materials, capabilities and experience make us ideally placed to produce promotional magnet campaigns ranging from volumes as low as 500 pieces, up to high volume runs of 5 million pieces. We are able to facilitate the entire process following receipt of your artwork or free issue printed media, and can deliver the finished promotional magnets in sheet form, die cut, or kiss cut as per your requirement. As we do not advocate the use of low-grade magnetic sheet for creating promotional magnets, your campaign will be produced through one of three methods below, depending on the desired volume and finish.

The flexible nature of supamag® transfers to its applications, and thanks to this versatility, supamag® can be used to produce large format magnetic graphics displays, signage, promotional material or to work in conjunction with digifilm® to create rapid change, layerable retail graphics or supaferro® for changeable displays. supamag® magnetic sheet is manufactured using the highest performing ferrite material mixed with a thermoplastic binder and magnetised on one side for the maximum magnetic performance. Suitable for both roll-to-roll and flat bed printing processes with a choice of white matt, gloss vinyl or PET finish. Adhesive-backed variants are available for bonding directly to various surfaces.

Plate-spreading-magnets are used for separating of stacked iron and steel sheets. The sheet separators are laterally grown from the sheet stack, they magnetize the sheets with the same poles, which repel them from each other. Plate-spreading-magnets apply both in automated systems where plates with vacuum or transshipped are magnetic, and the manual work, where the gripping sheet is greatly facilitated by their help. Our Plate-spreading-magnets consist of a reinforced magnet system, which is installed in a stable sheet steel housing.

Aluminum and copper recycling eccentric eddy current separator China Non ferrous

Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note Simple adhesive mounting; selfassembly possible. Required tape length calculated from measuring path + sensor length "L" + (2 x run or return "B"). L = see drawing of sensor used. B = 10 mm (run and return). Technical data Coefficient of expansion (11 ± 1) x 106/K (spring steel) Temperature range Ambient temperature 20–70°C Storage temperature 40–70°C Assembly Installation using the preaffixed doublesided adhesive tape must be carried out according to the enclosed user information. On request Other lengths from 0.1–100 m, in increments of 0.1 m. Note Relative humidity 100%. Dewing is permissible. Drawing reference 1) Cover band A = 0.176 mm 2) Magnetic tape M = 1.0 mm 3) Carrier band T = 0.3 mm 4) Adhesive tape K = 0.1 mm 5) Required tape length = measuring path + L + 2 x B 6) Measuring path

Self-adhesive, metal tape for smooth surfaces – simply cut to size. With 10 magnets for attaching notes, etc. • Flexible, self-adhesive metal tape • Incl. 10 black magnets (Ø 30 mm) for affixing notes, sheets of paper, etc. • Tape can be cut to desired length, sticks securely to all smooth surfaces • Magnet holds up to 5 sheets of paper • Width: 35 mm

Sheet metal handling and lifting steel plates with vacuum technology. Both magnetic and non-magnetic sheets are easily lifted. The suction pad is placed on the metal product, after which the vacuum is activated by a push on the button. Now you can lift, move, or even turn the sheet metal. Vacuum lifting is used during production, storage, internal transport, transhipment, and construction. Besides vacuum lifters for metal plates, we also design pipe handling equipment. All our designs are custom made to perfectly match the individual situation. Why choose lifting plates by vacuum? Vacuum offers unique advantages compared to other lifting methods to lift plates, such as chains, clamps, and magnets. Chains and clamps can be used to lift non-magnetic plates, such as aluminium, copper, and stainless steel. Compared to these lifting methods, vacuum offers distinct advantages: No damage to the plate, not even scratches No spacers or stoppers required Easy and fast handling Less manpower

Can be cut and drilled. Available in white, white PVC or adhesive format. Tolerances: Thickness +/- 0.005 , Width +/- 0.015 a +/- 0.030 , Length +/- 1%. Working temperature: -26ºC a 70ºC. Magnetic sheet: Ideal for advertising and signage. Can be cut at any size. Magnetic roll: Can be cut and drilled. Ideal for advertising and signage. Available in Natural, with white PVC or adhesive PVC.

The magnetic sheet floaters are designed for separation of magnetic steel sheets, clean , oily or sticky sheets. They help boost press and press brake production by eliminating the need to fumble with thin oily sheets. It also operates in automated systems. For a good selection of magnetic floater in the separation of plates, first of all we should know the thickness of the sheets, since it is a critical input to do a good job. One thing to bear in mind is that the magnetic float IDG.FS.RB shall be 90 mm higher than the stack of sheets to be separated. Construction features: * Stainless steel case. * Construction of the magnetic circuit with powerful permanent magnet, which can not be demagnetized. * High resistance welded box. * Threaded holes in the mounting base for a quick assembly * Ceramic or Rare Earths magnets. * Non-standard size. * Sizes and configurations according to customer characteristics. * Available in various magnetic forces.

TenPin Magnets Tenpin shaped and containing a neodymium magnet to hold numerous sheets of paper or mark targets. The shape of the casing makes placing or moving the magnets very easy despite their high hold strength, and also allows string to be attached between them to identify trends or patterns. Drawing Pin Magnets Small and incredibly strong thanks to the encased neodymium magnet, ideal for holding multiple sheets of paper to a receptive surface. Marker Magnets The classic round office magnet contains a ferrite magnet, although not as powerful as the Tenpin or Drawing Pin magnet they provide a good level of hold strength. Easily positioned, or moved around a receptive board making them ideal for offices, homes, schools or sports coaching boards.

supaferro® sheet is a durable and tactile material with superb magnetic receptiveness, making it ideal for use in conjunction with supamag® magnetic sheet to create large format graphics displays or signage. This is achieved by supaferro® forming a base layer to receive printed magnetic sheet, or by printed supaferro® itself being applied to a magnetic base layer. Thanks to its flexible nature, supaferro® can be applied to flat or curved surfaces, making it a versatile and effective choice for retailers and other users alike. supaferro® is also used to create dry wipe whiteboards that accept magnets, commonly termed 'magnetic white boards'. supaferro® is:

We offer options of adhesive applied to ferro sheet to allow bonding to different surfaces and media, which creates a surface to receive magnets. Once bonded to a surface or media the receptive face can be used in conjunction with supamag® magnetic sheet to create graphic displays or signage.

We offer a range of double sided, high tack, pressure sensitive, solvent acrylic adhesives, including foam adhesive for use on uneven surfaces or where shock absorption is required. tesa® adhesives and our own adhesives are immediately usable, temperature resistant, provide high shear resistance and contain plasticiser barriers to maintain performance. We have the ability to bond adhesive to flexible magnetic sheet, flexible magnetic extrusion, flexible ferrous sheet and steel tape to your specification. The choice of adhesive will usually be dependant upon the intended application for the finished product. In addition to the branded adhesives supplied by tesa® we also offer our own adhesives as an alternative option.

Designed and manufactured in Sheffield, Attract® is a multi-function single or double-sided magnetic display system which can be free-standing, suspended, or wall-mounted. The versatile nature of an Attract® magnetic display provides retailers with the choice of installing displays on walls, floors, counters, at till points, within windows and from ceilings. Attract® contains an internal magnetic surface, single or double-sided, housed within an elegant, sleek frame. The magnetic display surface works in conjunction with printed digifilm® ferrous media, which is overlaid onto the magnetic surface. Due to the strength of the internal magnetic surface, multiple layers of printed digifilm® ferrous media can be added, allowing the magnetic display to be quickly and easily changed and promotional messaging to be added instantly. All our Attract® products can work with drywipe and chalkboard flexible magnetic sheet.

Magnetic sheet separators separate sticky or oiled steel sheets and prevent two sheets from being picked up at the same time. They ensure a smoothly running production process by ensuring that you pick up the steel sheets one at a time. The permanent magnetic force remains constant throughout the years. Sheet separators separate steel sheets up to 4 mm thick of almost any shape, length or width. Round or asymmetrical shapes are also possible. They can be switchable or permanent magnetic.

USED FOR HANDLING OF sheet steel in packs or single / slabs. Electro-permanent magnets; current is supplied to the coil only to activate or deactivate the magnet / a magnetized load may be held by the electromagnet as long as required / energy efficiency / high safety level / ease-of-operation / high level of operating efficiency