Results for
SPIROL
Germany
SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!
Request for a quoteSPIROL
Germany
The Model CLX operates the same way as SPIROL's Model CL, yet this extra-large Compression Limiter Installation Machine is custom-designed to accommodate larger assemblies outside the standard footprint of the Model CL. Visit www.SPIROL.com to learn more!
Request for a quoteSPIROL
Germany
This robust, vertical installation machine is specifically designed to install Compression Limiters into a variety of plastic components. The machine is available in two models: the CL1000 is capable of 4.4 kN (or 1,000 lbs.) of installation force and the CL2000 is capable of 8.8 kN (or 2,000 lbs. of installation force, and is available with multiple installation tips in nearly any configuration at various elevations. The incorporation of a touchscreen operator interface machines makes our machines easy to use and customisable. Language conversion is easily executed to support international use. The Model CL is equipped with installation verification to ensure that the machine has completed a full installation cycle and a Compression Limiter was installed at each location. This highly flexible platen style machine with 228mm x 279mm (9" x 11") working area. The Model CL is available with optional enhancement features for error-proofing and maximum efficiency.
Request for a quoteSPIROL
Germany
This versatile tool is ideally suited for low to moderate levels of production for assemblies that require installation forces up to 22.2 kN (5,000 lbs). The Model PMX Extra Heavy Manual Pin Inserter easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. This Extra Heavy Duty Manual Pin Inserter will provide smooth operation, repeatability and durability.
Request for a quoteTARHAN AUTOMATION AND MACHINE
Turkey
MACHINE OUTER CASING REVISION MACHINE MECHANICAL OVERHAUL CNC PERIODIC MAINTENANCE AND GENERAL MAINTENANCE SERVICES MACHINE TRANSPORTATION MACHINE INSTALLATION MAKING IDLE MACHINES OPERATIONAL MANUFACTURING AND APPLICATION OF MACHINE COMPONENTS
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Self-tapping insert installation tool for all types of self-tapping threaded inserts (with cutting slots Ensat 302, with cutting holes Ensat 307 and Ensat 308) and in different materials (galvanized steel, stainless steel, brass, plastic) For machine use Depth of grip adjustable with bushing Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
This is a plactic cover,used for machine accessories.
Request for a quoteIGUS® GMBH
Germany
Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible
Request for a quoteIGUS® GMBH
Germany
Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request
Request for a quoteIGUS® GMBH
Germany
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Aluminum separators automatically pick up aluminum and steel cans from all waste collected from the recycling stations. 1. Recovery aluminum cans from plastic bottles. 2. High efficiency of recovery of aluminum from city waste.
Request for a quoteMICRON AMERICA
Turkey
The Micron Tep 3 machine is the machine that bridges the gap between the hobbyists and professionals. The free standing or bench mounted feature of this machine makes it top of the line choice as its deep frame feature allows a comfortable work space and can easily be transported to the job site. The machine is made out of heavy duty cast iron and will last you for years to come. This machine will accommodate all fastener installations up to size #5 grommets. The Micron TEP 3 is the grommet press that bridges the gap between hobbyists and professionals. The Professionals like this machine because it is a fully capable well built machine that is light weight so it is easy to carry from station to station in the shop and to outside jobs. The hobbyists love this grommet press because they can get professional results at very affordable price.
Request for a quoteMICRON AMERICA
Turkey
All dies, sold separately. Our portable pneumatic fastener attaching machine is the top choice for the tarp industry as its light weight portability will allow you to take this machine to any job site. It is built on casters so you can work on the floor to install grommets on your heavy duty tarps or banners that are too heavy to lift up. This machine will accommodate installation sizes from # 1.7 to # 3 grommets and can be used with our heavy duty industrial dies for the toughest material installations. The interchangeable dies and the grommets are sold separately. The metal base and the casters are included with the PL 10. At Micron, we Manufacture Quality and Reliability. 60516 (1) High Quality, Easy Portability. The Micron PL 10 high quality portable Grommet Press has a handle on top and is easy to carry around in the shop or to outside job locations.
Request for a quoteMICRON AMERICA
Turkey
Our PL 20 Machine is a portable fastener attaching machine that has one hopper to accommodate the grommets to be automatically fed through its unique channeling mechanism built to a standard size. This machine also has a side pocket slot that receives the washers for safely installing your grommets with washers. As it is built to install only one size grommets, this machine can be built to accommodate installation from 1.7 to 3 grommets. The PL 20 is a semi automatic machine. A hopper and chute system feed the eyelets to the top die of the machine. This greatly increases productivity by allowing the operator to set grommets at a higher rate.The bottom washer can also be placed on the bottom die to create a better hold. Our safety system makes the installation extremely safe for the operator. The safety feature checks for any material
Request for a quoteMICRON AMERICA
Turkey
Micron Buttons are made for Heavy Duty use. You can rely on our buttons to be durable, strong, and provide a secure hold after installation. These Decorative Buttons meet all standards for manufacturers and textile shops. Micron Buttons will ONLY work with Micron dies and the MD 1 Cover Button Machine. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Suzanne Buttons comes with nine different sizes.
Request for a quoteMICRON AMERICA
Turkey
The Bombe Cover Button with sewable hook on the back. Grommet Mart’s Buttons are the choice of textile professionals. Our covered Buttons are manufactured with the most modern technology. The front and back are both manufactured of the highest quality which make these Buttons particularly ideal for Clothing, Home, Auto and Marine Upholstery. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Bombe Buttons comes with 14 different sizes with 4 different backer style. Please see our Size Guide and Related product section for details.
Request for a quoteMICRON AMERICA
Turkey
Grommet Mart’s Buttons are the choice of textile professionals. Our Covered Buttons are manufactured with the most modern technology. The front and back are both manufactured of the highest quality which make these Buttons particularly ideal for Clothing, Home, Auto, and Marine Upholstery. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Flat Buttons comes with 5 different sizes and 3 different backers. Please see our Size Guide and Related product section for details.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MICRON AMERICA
Turkey
Grommet Mart’s Buttons are the choice of textile professionals. Our Covered Buttons are manufactured with the most modern technology. The front and back are both manufactured of the highest quality which make these Buttons particularly ideal for Clothing, Home, Auto, and Marine Upholstery. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Flat Buttons comes with 5 different sizes and 3 different backers. Please see our Size Guide and Related product section for details.
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
Aluminum Dross Recovery Unit for secondary aluminum producer With unique design, our aluminum dross recycling system manage the hot dross very effectively , the oxidation and metal loss will be terminated in a very short time, in-house metal recovery could be 70-80%, much higher than any other solutions. The system covers the following equipment. Dross stirrer Dross cooler Crusher and screening machine Dust collector Conveyor
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
Dross Press for Aluminum Recycling for secondary aluminum producer DROSS COMPRESSION SYSTEM HUAN-TAI DROSS COMPRESSION SYSTEM the equipment and the accessories helps customers to increase the metal recovery significantly. 1. Please give the amount of dross removed from each furnace each skim. As you have more than one furnace please tell us all of them. 2. How often are the furnaces skimmed. 3. What is monthly dross generation in kilo's and what is percent of monthly generation to production of good cast product. 4. What is current method of dross recovery. 5. How much aluminum is currently recovery from the dross. 6. Please send a picture of current dross pans empty and full of dross and give us the basic pan dimensions and how much dross they typically hold. 7. Please send us a picture of your current dross in storage. Also our custom alloys and designs are manufactured to fit your furnaces and dross processing applications
Request for a quoteSPIROL
Germany
This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).
Request for a quoteSPIROL
Germany
An accurate and consistent method to install virtually any Compression Limiter into plastic applications requiring up to 4.5kN (1000 lbs). Install just one Compression Limiter into one assembly, or several Limiters across multiple assemblies simultaneously for increased productivity. The Model CP’s quick-change tooling creates the flexibility to adapt the platform to a variety of products within seconds. The Model CP has a 230mm x 280mm (9”x11”) work area and is built on a rigid steel frame with high-precision shafting and linear bearings resulting in smooth operation, precise positioning, repeatability, and durability. The Model CP is available with optional enhancement features for error-proofing and maximum efficiency.
Request for a quoteMESUTRONIC GMBH
Germany
metal separator was developed for the examination of plastic granulates, ground material and powders for metallic foreign bodies. It is used in the injection molding and extrusion areas for slow-flowing material columns. Both the detector and the ejection unit have been specially developed for this area of use. This results in top performance data for precision, operating reliability and ease of cleaning. Failsafe storage of all system parameters Digital signal processing for best detection Process- and condition monitoring Standardised system for a wide area of use Robust construction for maximum lifetime Highest precision in long-term operation Fast ejector for minimized material loss Dismantle without tools All components are easily accessible
Request for a quoteCMPLAST
Poland
Is a material belonging to the group of highperformance thermoplasts. It has the best heat resistance among plastics with technical use. It also has very high chemical resistance. It is insoluble in all known solvents and resistant to weather conditions. It is characterized by the lowest coefficient of friction, as well as excellent insulation and the lowest dielectric coefficient. It is used in the construction of specialized equipment, in the construction of machines, pumps, in water installations, chemical installations, medicine, food industry, in thermal technology.
Request for a quoteSPIROL
Germany
SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.
Request for a quoteSPIROL
Germany
Flexible, versatile solutions for post-mold Insert installation into thermoplastic and thermoset plastics. SPIROL's Installation Machines are the ideal foundation for stand-alone systems and enhanced assembly systems provided by SPIROL. Our standardized, time-tested, modular designs are robust, reliable and easily adjustable — allowing simple customisation to meet the specific needs of your application. More than 80% of the components in the Insert Installation Machines we design are pre-tested and production-proven standard items. This translates into faster delivery, greater reliability, and lowest cost for Insert Installation Equipment of comparable quality. We specialize in custom application-specific part holding devices. Fixturing – holding your components accurately and firmly during insertion – is a critical element to the performance of your assembly equipment.
Request for a quoteSPIROL
Germany
Some of SPIROL's standard Pin Installation Models can be equipped with a pusher punch (in place of a pin insertion quill) to press Threaded Inserts into plastic assemblies. The most appropriate Installation Machine depends on the actual insertion force required to press the Insert into the plastic hole and the desired productivity. Generally speaking, the Model PMH Heavy Duty Installation Machine is typically used for low to medium volume installation, and for medium to high volume installation, SPIROL's Model PH/PHX Platen-Style Installation Machines can be used for simultaneous installation of several Press-In Inserts at the same or different elevations. Due to the length to diameter ratio of Press -In Inserts, it is not possible to cost-effectively tube feed this type of Threaded Insert with SPIROL's automatic feeding and Installation machines.
Request for a quoteTECHNO-COMPOSITES DOMINE GMBH
Germany
roller shutter housing connector We worked with a customer from the construction sector to develop a GRP connecting element that optimally connects the window frame and window blind box. This transfers the high mechanical loads exerted by wind in an optimal way. At the same time, the GRP profile improves the insulation capability of the entire system. The GRP profiles are drilled and counterbored on a large scale using a CNC machine, thus making installation significantly easier for the workmen.
Request for a quoteSPIROL
Germany
This versatile installation machine is suited for moderate to high production applications requiring up to 1.3 kN (300 lbs.) of installation force. The pin insertion head advances and retracts for ease of loading and unloading of the components to be pinned. The machine’s insertion bushing is positioned close to the part for smooth installation. A vibratory feeder and orientation head transfers the pin from the feeder bowl to the installation position, eliminating the need for the operator to handle the pins. A quick-clear mechanism allows for easy clearing of the feed tube without the need for tools when changing pin size or performing maintenance.
Request for a quoteResults for
Machines for installations - Import exportNumber of results
148 ProductsCountries
Company type
Category