Machine-tools - Import export

Components and parts for machine builders,

The manufacturing precision of the roller has a major influence on the quality of the final product (wires) as well as on the service life of the rollers. It is therefore essential that the ground “V” groove on the outer ring is machined and positioned precisely relative to the internal geometry. WIB only produces straightener roller bearings produced in this fashion, while many other producers machine the outer wire guide groove after assembly

Different systems can achieve the objective depending on product requirements: Machine tools for type VSMH rotary transfer machining (hydraulic) Machine tool for type VSMK rotary transfer machining (cam-controlled) Type NBM finishing machines for stamped, moulded, and cold extruded parts Our years of experience in complete machining of serial parts passes to the next generation in constructive and innovative cooperation.

The rotary table combination RT3A100 consists of two directly driven rotary tables of the RT3A100 series. The B-axis has a swivelling range from approx. -10° to +110°; the C-axis can be rotated infinitely. The unit is driven by two integrated 3-phase synchronous motors. The drive guarantees highest dynamics and precision. An innovative clamping unit integrated in the housing guarantees high holding forces when the drives are switched off without position changes on the axes. By means of compressed are impact, the holding torque can be increased from 15Nm to 20Nm for special applications. The complete system is supplied as ready-to-connect unit.

1. It is a Single Leaf Chain Included in Two Standards EL chains are only included in the ISO standard, while AL chains are not subject to any regulation and have dimensions that vary between manufacturers. However, BL leaf chain is included in the international chain standard ISO4347 and BS29.8. 2. Offers Excellent Length Consistency BL series leaf chain has a consistent and reliable pitch and length because it consists of specific components. 3. It Has a Relatively Better Tensile Strength Rate BL series leaf chain has higher tensile strength and lower weight. The tensile strength rating can be up to 15% better than EL leaf chain, making it ideal for forklift masts and telescopic booms.

The Customised manufacturing is performed in a 3000 sqm area. We offer a wide range of services: we construct and machine small, medium and large size components. Our lathes machines are: DOOSAN PUMA ¤ 600/¤ 900 x 2500; DOOSAN LYNX300M ¤ 370 x 720; ALPHA 1400X3 ¤ 400 x 1400; DMG MORI NLX 2500/1250 ¤ 400 x 1250 The strength of this division is the design and manufacturing of fixtures and dedicated machines aiding manufacturing. The secret to our competitiveness is flexibility and high-quality services. Founded in 1993, our company’s philosophy is to serve our clients and partners according to the highest standards, using the most up-to-date technologies.

KNOW-HOW & EXPERIENCE, COMMITMENT & IDEAS, RELIABILITY & FLEXIBILITY – SAMAG, MACHINE TOOLS FROM THURINGIA SINCE 1873! WE SEE OURSELVES AS DEVELOPERS AND MANUFACTURERS OF MACHINE CONCEPTS, FROM INDIVIDUAL MACHINES TO TURNKEY LINES. THE FOCUS OF OUR PRODUCTS IS ON MILLING AND DEEP DRILLING TECHNOLOGIES. Separated from the SAMAG Group, we have been independently continuing the tradition of mechanical engineering in Saalfeld / Thuringia as SAMAG Machine Tools GmbH since January 2020. With 140 employees, we draw on the experience of more than 145 years of machine tools for metal cutting. One of our strengths is the high level of technological solution expertise with which we help our customers worldwide achieve sustainable success. As an international machine tool manufacturer, our most important sales markets are the automotive industry, tool and mold making and mechanical engineering.

Manufacturing various metal parts.

The Automated Serial production qualified for the highest standards in CNC machining in a 6000 sqm. The production lines here are made of automated, robotized cells and are able for high precision mass production of different parts for any industry – engine or structural parts, any other components – as well as aluminium and steel products. Besides the production for our customers there are Data Matrix Code laser engravers, online production control and support system (OEEm) for full traceability, robotized high pressure washing equipment, tightness Quality CMM machines, assembly and logistic services. We have centralised chips and emulsion management, temperature and filtered air control, 7/24 shift pattern.

It considers your process as a whole and transforms your business into lean production & We plan together with you the production technology you need for the entire facility in line with industry 4.0 requirements. In addition to all mechanical and electrical engineering, we provide complete mechanical, electrical and automation manufacturing with assembly service.

Cutting, bending, welding, machining, painting and assembly operations of specially designed chassis can be carried out within our company and the product is delivered to the end user in finished form.

Each our component is individually handled in complete care and tested with the latest measuring devices - Mitutoyo. Specialized in smaller productions has its own advantages. We individually devote ourselves to our partners. We support you by: - before production, we review the technical documentation and implement possible changes, - we have a larger amount of material in stock which guarantees us an immediate start of production and quick delivery of a new spare part, - all products are inspected, deburred and hand polished before release. The components are checked to ensure that they fit properly and that the external product is compatible. All dispatched products are functional and visually sophisticated. Which leads to more affordable and better quality of the end-product, and consequently greater satisfaction of our partners.

Cajhen offers a specialized range of toolholders designed to meet the exacting demands of precision metalworking. These toolholders ensure optimal stability, accuracy, and performance in various machining operations, including turning. Crafted from high-quality materials, Cajhen's toolholders guarantee secure and precise positioning of cutting tools, minimizing vibrations and tool deflection.

The most universal and most sold model by far for the mid capacity range to 10,500 cycles/h. Simple operation from touchscreen Integrated controller for infeed hole punching Available in two working widths.

High-performance drum feeder with low feed height for comfortable working. With a capacity of up to 20,000 cycles/h, the TA 20 is also deployed for the small folds of rotary printing sheets.

Mobile transfer table for inline configuration of BSR 550 Servo with machines interfaced upstream such as cross cutters and digital printing machines.

Simple, cost-effective delivery with fixed height.

The SAB 550 / 750 stream delivery is used for multiple-up production. Formats from A3 to 30 x 30 mm (minimum) can therefore be delivered in streams Round belt infeed for optimised product delivery Powered top belts with size-independent stream belt Preselection and total counters Motorised height adjustment Available in two working widths, optionally with stream belt extension to 2 meters.

The BSM 750 Servo with integrated front trim lends the booklet its final form. Front trim, head and foot trim, and blank separation are performed in one operation.

Where punch force is crucial. Fitted with a high-performance servo drive, capacity rises to 12,500 cycles/h. High punch force for die-cutting (to max. 4 mm) High-performance 5kW servo motor Controllable cutting speed Available in two working widths.

"The compact and attractively priced BSR 550 basic is structured as an offline solution. It is designed specifically for users who want to produce small and medium runs economically and efficiently as well as for those for which the flexible connection options and technical features of the BSR 550 Servo have no priority. Individual products are fed to the punching area from the flat pile feeder and punched with the rotating flexibe die. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching cylinder with high precision without stopping. To exchange the flexible dies the entire breakout and deliver unit is disconnected from the die-cutting area. Thus an optimal accessibility is guaranteed. After die-cutting the inner cuts are separated and the section grids deflected.

This machine configuration is the most flexible variant. It can not only be combined with downstream but also with upstream equipment such as cross cutters, digital printing machines and folding machines. Products are fed individually to the punching area via register table and rotary punched by using a flexible die. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching cylinder with high precision without stopping. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed. The maximum capacity of the machine is 12,000 sheets/h.

In this configuration variant, products are fed to the punching area individually from the pallet feeder and rotary punched by using a flexible die. The maximum stack height of the feeder is 100 cm. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching cylinder with high precision without stopping. Inline configuration of the die-cutting machine with machines interfaced downstream such as folding machines, mailing systems and packaging machines is the most efficient way of carrying out multiple high-performance steps in one operation. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed.

Individual products are fed to the punching area from the flat pile feeder and punched with the rotating flexibe die. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching punching cylinder with high precision without stopping. Inline configuration of the die-cutting machine with machines interfaced downstream such as folding machines, mailing systems and packaging machines is the most efficient way of carrying out multiple high-performance steps in one operation. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed. The maximum capacity of the machine is 12,000 sheets/h

The LS 1679 has been specially developed for press brakes. The basis for its high accuracy and repeatability is its precise glass scale and high-quality integral bearing. Thanks to the material of its steel track and steel roller bearing component pair it is very robust. There are many variants for connection to the machine frame, whereby the ball coupling offers the most degrees of freedom. Besides the standard resolution with 5 µm measuring step there is also a variant with 1 µm. For perfect mounting to the two C-columns there are variants with rightward and leftward cable outlets.

Linear encoders from HEIDENHAIN fornumerically controlled machine tools can be used nearly everywhere. They are ideal for machines and other equipment whose feed axes are in a servo loop, such as milling machines, machining centers, boring machines, lathes and grinding machines. The benefi cial dynamic behavior of the linear encoders, their high permissible traversing speed, and their acceleration in the direction of measurement predestine them for use on highly-dynamic conventional axes as well as on direct drives. The linear encoders with full-size scale housing are characterized by their sturdy construction, high resistance to vibration and large measuring lengths. The scanning carriage is connected with the mounting block over an oblique blade that permits mounting both in upright and reclining positions with the same protection rating.

Linear encoders from HEIDENHAIN fornumerically controlled machine tools can be used nearly everywhere. They are ideal for machines and other equipment whose feed axes are in a servo loop, such as milling machines, machining centers, boring machines, lathes and grinding machines. The benefi cial dynamic behavior of the linear encoders, their high permissible traversing speed, and their acceleration in the direction of measurement predestine them for use on highly-dynamic conventional axes as well as on direct drives. The linear encoders with slimline scale housing are designed for limited installation space. Larger measuring lengths and higher acceleration loads are made possible by using mounting spars or clamping elements.

Linear encoders from HEIDENHAIN fornumerically controlled machine tools can be used nearly everywhere. They are ideal for machines and other equipment whose feed axes are in a servo loop, such as milling machines, machining centers, boring machines, lathes and grinding machines. The benefi cial dynamic behavior of the linear encoders, their high permissible traversing speed, and their acceleration in the direction of measurement predestine them for use on highly-dynamic conventional axes as well as on direct drives. The linear encoders with full-size scale housing are characterized by their sturdy construction, high resistance to vibration and large measuring lengths. The scanning carriage is connected with the mounting block over an oblique blade that permits mounting both in upright and reclining positions with the same protection rating.