Machine mounts - Import export

Spring isolators can be used for source and sender vibration isolation. The springs are manufactured of a special spring steel wire and KTL coated. Every spring isolator can be provided with an additional damping cushion of stainless-steel. Elemente with a frequency range between 3-4 Hz can be provided with a viscous damping, too. Spring isolators with a natural frequency range of 3-5 or 4-6 Hz are especially made for higher forces. They can be expanded in size and load-capacity without any difficulty. Spring isolators of RG+ are available for four different natural frequency ranges: Spring isolators with a natural frequency of 3-4 Hz Spring isolators with a natural frequency of 5-6 Hz Spring isolators with a natural frequency of 7-9 Hz Spring isolators with a natural frequency of 3-5 or 4-6 Hz

Separates the free beans from the mechanically harvested green bean clusters. Machine primarily comprised of a drum fitted with hooks of special shape. Mobile machine mounted on rollers so that the position of the drum can be adjusted in relation to the fall of products above the drum.

This dot peen marking range is a marking solution equipped with innovative functionnalities especially developed for integration in production processes PRODUCT ADVANTAGES ROBUST Frame in moulded aluminium. Each axis is fitted with a ball bearing and a transmision system with automatic compensation ERGONOMIC Vertical or horizontal position, easily adaptable to any rackmount configuration due to a connection at the back of the machine. HANDY Mounting connection cable can be connected at the back or on top of the marking head, to facilitate the integration. Three mounting bracket positions are available. FLEXIBLE First integrated marking equipment fitted with a 16 bus card for greater time efficiency and productivity.

Our drum type Pre-Cleaning Machines; It is produced in the capacity range of 20 - 100 tons per hour. With the ÇSI Pre-Cleaning Machine, all unwanted foreign substances (garbage, dust, straw, etc.) in all kinds of grains (wheat, barley, corn, canola, soybean, etc.) are perfectly separated at a level that does not require cleaning again. Thanks to its airlock and cyclone as well as its excellent filter, it leaves absolutely no waste in the environment. Our sieves, which are designed according to the structure of all kinds of products, are easily mounted on the machine. Thanks to the brushes placed on the sieves, the sieves constantly clean themselves as the machine operates. With its high suction power dust collection and filter system, it does not leave any dust waste in the environment. The Pre-Cleaning Machine, designed by ÇSI engineers using advanced technology, will provide the cleaning you need for many years.

Radial scanning machine is used to separate low density substances from high density grain products such as wheat, barley, corn and similar. Separates foreign substances such as dust, sand and small seeds in wheat. Wheat entering the machine from the wheat inlet is filled into the vibro feeder and distributed smoothly across the width of the air duct. Here, in the horizontal aspiration channel, the product is separated from low density materials through its double adjustable wall. The fan of the radial scanning machine is mounted on the main body through bearings. The outer body is made of sheet metal, and the foot part and the outlet nozzle located on the foot part are mounted on the body.

We offer the full range of solutions for process automation tasks implemented with Foundation™ fieldbus and PROFIBUS-PA: The portfolio includes power supplies, power conditioners, multibarriers as well as junction boxes in IP20 and IP67. The range also includes passive connectivity products such as fieldbus cables, field distributors and terminating resistors. The components are suitable for use in harsh environments and can directly be mounted on the machine or in the process.

Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/4 "Mounted on the side" - Travel distances over 200 m "Mounted on the side" - Travel distances over 200 m Extensive unsupported lengths for "side-mounted" applications Roller E-Chain® links available (with roller chain) Max. travel distance: 200 - 800 m High torsional stability Manifold interior separation potentials Large accessory kits Typical industrial sectors and applications RTG, quayside cranes, many other types of cranes Composting plants Gypsum, concrete, chemical and mineral plants, as well as agricultural plants Machine tools: unsupported, side-mounted applications Construction machinery ESD applications Heavy machinery Steel works Shipyards Welding plants ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels

Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)

Body and jaw holder hardened and ground. Note for ordering: Supplied with hexagon crank handle. Order jaw plates separately. Note: Mechanically operated centric vice. Suitable for automation: prepared with gripper slot for handling systems. Flexible mounting: suitable for zero-point systems, mounting on machine tables or on custom systems via a baseplate. Centring precision: +/- 0.02 mm. The use of a torque wrench is recommended to achieve a controlled clamping force. Features: Clamping slide and spindle nut in one piece Slots and fastening threads for mounting attachment jaws Reversible jaws (accessories) with lateral thread for workpiece stop enables a wider clamping range Good swarf and coolant removal

L-SEALERS BSF SERIES The manuals bench L-sealers BSF series are very simple and practical. Allow to obtain the envelopes perfectly sealed, using standard fold film. They are suitable for use in laundries and textile sector in general and in the paper industry, but are also helpful in the food industry for the packaging of the bread. Sealing bar with manual operation. The choice of the machine must take into account that: the dimensions of the box (height + depth) must not exceed the maximum width of the reel mounted on the machine (depending on the model) also considering that there must always be at least 50 mm of waste. To confirm that the machine is suitable, we always advise you to contact us and report the measurements of the boxes to be packaged.

Sectional roller brushes are available in several different configurations to suit specific machines. Each brush is mounted and locked next to its neighbour to create a roller brush that can be be replaced in worn areas can be removed and replaced They can be colour coded to suit specific areas of usage and can be manufactured in any dimension, filament and stiffness.

Roll, Sandwich Hamburger and similar sized products and Francala Bread are individually wrapped. Our machine has a servo motor system. Thanks to the touch screen and PLC on the machine, product package length, photocell adjustment and machine speed can be adjusted as desired. There is a sensor control system that prevents jamming of the product. If the product location is not correct, it stops the machine. All surfaces and covers that are in contact with the product in the machine are made of 304 quality chrome-nickel metal. Rotating jaw system. It packs 115 products per minute (roll, sandwich hamburger and similar products), and 83 products per minute in Francala Bread. It easy to use. Optionally, it is produced so that a coding device can be mounted on the machine. Cellophane bobbin is easy to disassemble and install, the place where it is mounted is an air system and PLC controlled shaft.

The PTT100 Track Stacker is an ultra-heavy-duty, versatile material-handling machine. Being a track-mounted stacker, it has unrivaled mobility and adaptability, suitable for large volumes of materials like aggregates, sand, gravel, and soil to move on difficult terrains. With the track-based system, the PTT100 can manage rough, uneven, or soft surfaces with ease; it is perfectly suited for mining, construction, and recycling industries. Be it an uneven job site or the need for efficient stockpiling in unapproachable areas, the machine is engineered for top performance in demanding conditions. Besides mobility, the PTT100 is designed to stack material efficiently for maximum storage space with minimum frequency of material handling. This saves immensely and enhances productivity in operations that require large-scale stockpiling. Coupled with other machinery, like crushers and conveyors, it becomes an integral part of a complete material handling system.

The PTT60 Track Stacker is a high-performance track-mounted stockpiling machine designed for conveying and stocking large volumes of material. Because of track-mounted mobility, this would be easy to maneuver into position and operate in difficult terrains. That makes the PTT60 ideal for industries such as construction, mining, recycling, and agriculture, where heavy material handling and stockpiling are at an all-time high. With the track system, this machine will have no problem operating on muddy, slippery, or uneven surfaces-it will be very manoeuvrable. The big stockpiling capacity translates to less number of operations, hence saving time on site. Besides the transport of materials, the PTT60 maximizes space utilization for the purpose of storage. The design allows higher and more accurate stacking to optimize space and reduce material handling costs. The machine can work with crushers, screens, and conveyors in conjunction with one another to enhance all operations.

A track-mounted impact crusher is a mobile crushing unit that is mounted on a set of tracks to move along even the most serviceable areas with efficiency. Unlike the traditional stationary crushers, these machines can easily be relocated at any location within a work site for better adaptability with the ever-changing demands of a project. The "impact" mechanism designates the working principle of the crusher, whereby the material is brought into the crushing chamber and receives repeated impacts from the rotor, thus being reduced in size. The track-mounted impact crushing machines have automated feeding systems, setting modifications according to various material types, and added abilities for better mobility. This mainly allows these machines to perform at large-scale projects involved in mining, road building, and demolition. Models from Polygonmach boast innovations that ensure each unit performs well in terms of crushing, whatever the nature or topography of the material.

MAGTROL offers a wide range of Load-Force-Weight Transducers with optional integrated electronics or Load Monitoring Units (LMU) with B.I.T.E. functions creating an ideal measurement system which continuously checks for overloads and short circuits. Idealy for use on Safety Applications according to ECE-R10, ISO 13849-1 : CAT4 & PLe and IEC 62061 : SIL3 (LE 6XX SERIES); ISO 13849-1 : CAT2 & PLd and IEC 62061 : SIL2 (LE 4XX SERIES) Magtrol Load Measuring Pins are used to measure load and force, and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LE Series Load Measuring Pins are rugged with high resistance stainless steel and tight construction. Available in several standard ranges from 2.5 kN to 1 250 kN. .... more information www.magtrol.com

With its compact, bearingless, maintenance-free design, the new TF Torque Flange Sensor from Magtrol brings many appealing advantages to torque measurement applications. The TF’s high torsional rigidity supports direct mounting on the machine shaft or flange, avoiding the use of couplings on one side. This allows easy integration into a test system, shortens the overall length of the test bench and reduces costs. Based on strain-gauge technology, the TF Sensor’s precise telemetry system enables highly accurate signal transmission. A signal amplifier mounted in the measuring flange amplifies the measuring signal, modulates it to high frequency and transmits it inductively (via the HF transmitter) to the receiver. In the receiver, the digitized torque signal is transformed into an analog output signal of ±10 VDC. Rotational speed can be measured and converted to a TTL output signal with the optional speed pickup. more info www.magtrol.com

LB Series Load Measuring Pins can be used alone or as part of a complete measurement system. Magtrol offers a wide range of Load-Force-Weight Transducers in various executions and accuracy classes and our Load Monitoring Units (LMUs) constitute an ideal safe measurement system which continuously checks for overloads and short circuits. MAGTROL Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LB 2XX Series Load Pins are rugged with high resistance stainless steel and tight construction, designed specifically for use in harsh industrial environments. Available in several standard ranges from 2.5 kN to 1250 kN, these highly ergonomic pins can be used for either new or refitted installations and are adaptable to various conditions.

The machine is intended for individual farms. It is used for tedding and spreading lowstemmed plants. The belt tedder-rake can rake dry and dry hay into longitudinal shafts on areas with a slope of up to 22%. The tedder-rake is a machine designed to be mounted on a tractor with a power of 12 HP. It is driven by the tractor PTO - through the articulated telescopic shaft.

D-SUB Standard, Solder pin – Angled, .370" 9.4 mm, Precision machined contacts, Metal bracket Mounting styles: — with mounting bracket and 4-40 UNC or M3 threaded insert — with mounting bracket, PCB clip and 4-40 UNC or M3 threaded insert — Quality class 3 (also available in quality class 1) — Shell: Steel tin plated (brass tin plated or stainless steel available on request)

Finish: Light grey Seven auto programmes; four timed programmes Sensor-controlled auto programmes stop drying when clothes are dry Dryer can be mounted on washing machine LCD display and interface on local language (13 languages) Reversible door (right/left) Manual or automatic drainage of condensation water – drain hose included Stacking brackets for column installation included Connection: 230V / 1ph / 13A / 50Hz / Max effect: 2.8kW Can be reconfigured to: 230V / 1ph / 10A / 50Hz / Max effect: 2.25kW Condenser dryer

Technical Data Main Motor Power : 55 kW Main Motor Operating System : Inverter controlled speed Pulley Diameter : 80/90 cm Cutting Stroke : 400 cm Rotation : -5/185 degree Length of Wire : 80-150 m Cutting Capacity : 12-25m^2 / hour

JETBOXX® plastic granulate dryers are compressed air based dry-air dryers for mounting directly on the feed section of the processing machine. The JETBOXX® technology guarantees perfect drying results thanks to plastic-specific and throughput-dependent dryer settings. The dryers are available with a volume of 30/50/75 litres and can be optimally adapted to your requirements with a large number of options from the JETBOXX® system. The JETBOXX® control provides a database for plastics, conveying control, week timer, fully automatic decrease and resume of the drying intensity when production is interrupted (overheating protection), automatic restart with preheating program in 1- or 2 shift operation, dew point measurement, speed dial programs, personal programs, and many more. Compressed air conveyors of one or two components with or without dedusting function are available. The conveying control is already included.

SPECIFICATION PRODUCTIVITY1500 pouches/hour FILLING RANGE200-1000 ml POWER SUPPLY, MAX220 V, 50 Hz COMPRESSED AIR PRESSURE5 kg/cm2 AIR CONSUMPTION~ 0.2 m3/hour @4 bar PACKAGING MATERIAL1/2/3-layered polyethylene film with black internal layer; thickness – 70-90 microns, width – 320 mm FILLING ACCURACY± 0,5-1% [depending upon bulk density of product, constant product availability in the product tank (for liquids), proper maintenance] OVERALL DIMENSIONS , (WxLxH)670 x 790 x 2570 mm WEIGHT, NET~ 450 kg MACHINE CONSTRUCTION All components are mounted on a single frame. All parts in contact with the product are made from stainless steel AISI 304 . The exterior panels are made of stainless steel AISI 202. Mechanical drive. Protective and hygienic front door. Basic Elements: Film unwinding is provided by rubberized shaft with electric drive and operated by inductive sensors Ultra-violet lamp for film sterilization Liquid Filler CIP connector

Scope of application: -Conventional and CNC-controlled milling machines – for efficient precision machining -Horizontal installation – great variability and flexibility Product features : -Excellent ease of operation guarantees optimal handling in every situation -Fast adjustment for clamping range preselection -The clamping force is generated and preset via the hydraulic pressure of a hydraulic unit -Integrated scrapers ensure functional reliability and minimise cleaning -Fixing on the machine table by means of mounting holes in the vice base. Additional holes can be made in the soft middle section of the vice base -Optional centre jaw allows two or more workpieces to be clamped -Coarse adjustment is performed by turning the spindle. The residual stroke of up to 4.5 mm is performed via a hydraulic unit with spring reset by means of a single-acting cylinder

Scope of application: -Conventional and CNC-controlled milling machines – for efficient precision machining -Horizontal installation – great variability and flexibility Product features : -Excellent ease of operation guarantees optimal handling in every situation -Fast adjustment for clamping range preselection -The clamping force is generated and preset via the hydraulic pressure of a hydraulic unit -Integrated scrapers ensure functional reliability and minimise cleaning -Fixing on the machine table by means of mounting holes in the vice base. Additional holes can be made in the soft middle section of the vice base -Optional centre jaw allows two or more workpieces to be clamped -Coarse adjustment is performed by turning the spindle. The residual stroke of up to 4.5 mm is performed via a hydraulic unit with spring reset by means of a single-acting cylinder

Product features: -Excellent ease of operation guarantees optimal handling for every application -Fast adjustment for clamping range presetting -Reproducible clamping forces are achieved using a torque wrench -Integrated scrapers ensure functional reliability and minimise cleaning -Fixing on the machine table by means of mounting holes in the vice base. Additional holes can be made in the soft middle section of the vice base -Optional centre jaw allows two or more workpieces to be clamped Scope of application: -Conventional and CNC-controlled milling machines – for efficient, precision machining -Horizontal installation – great variability and flexibility

Product features: -Excellent ease of operation guarantees optimal handling for every application -Fast adjustment for clamping range presetting -Reproducible clamping forces are achieved using a torque wrench Integrated scrapers ensure functional reliability and minimise cleaning Fixing on the machine table by means of mounting holes in the vice base. Additional holes can be made in the soft middle section of the vice base Optional centre jaw allows two or more workpieces to be clamped Scope of application: -Conventional and CNC-controlled milling machines – for efficient, precision machining -Horizontal installation – great variability and flexibility

​​Dear Sirs, We are Turkish Company manufacture, distribute and export Agricultural Machinery and Farm Equipments. Products at www.agrimir.com Trailers Cultivators Rotary Cultivators Sprayers Seed Drill Chisel Plows Fertilizer Spreaders Disc Harrows Disc Mowers Disc Ploughs Drum Mowers Feed Mixers Field Sprayers Garden Sprayers Hay Rakes Heavy Duty Disc Harrows Offset Disc Harrows Post Hole Diggers Potato Planters Potato Harvesters Rotary Tillers Rotovators Sickle Bar Mowers Subsoilers Threshing Machine Mounted Sprayers Trailer Sprayers Turbo Atomizers Wheel Rakes Forage harvesters Stone collector Interrow cultivators