Lubricating oil - Import export

to standard SAE 794

Fully synthetic, adhesive lubricant for open gear drives, toothed wheels, chains, guideways and wire ropes. The highly-viscous and high-pressure resistant oil remains fluid even at low temperatures and leaves no solid residues

Polydimethylsiloxane / linear non-reactive polydimethylsiloxane (PDMS) is one of the high-performance polymers, with unique physical and chemical properties like flexible, thermo-tolerant, resistant to oxidation, ease of fabrication, tunable hardness, and other desirable properties.

The rotation of high speed shaft should not be more than 1500 rpm; The circumferential velocity of gear tranmission should not be more than 20 m/sec; The temperature of work environment should be -40-45°C. If it below 0°C, before start, the lubricating oil should be pre-heated to above 0°C. This speed reducer can be run at clockwise and counterclockwise direction.

New concept! Maintenancefree track surface! Track surface doesn't require lubrication over long term use! IKO CLube Unit for Cam Followers is a lubrication part to mount into Cam Followers. Regular lubrication is not required as lubrication oil is supplied onto the outside diameter surface of the cam follower outer ring and track surface. Long term maintenance free track surface achieved.

These Roller Followers are lubricated with CLube, a thermosetting solidtype lubricant which fills the inner space of the bearing. CLube is lubricant made of a lot of lubrication oil and fine particles of superhigh molecular polyolefin that are solidified by heat treatment. As the bearing rotates, the lubricating oil oozes out onto the raceway surface in proper quantities, maintaining the lubrication performance for a long period of time.

These Cam Followers are lubricated with CLube, a thermosetting solidtype lubricant which fills the inner space of the bearing. CLube lubricant is made from lubrication oil and fine particles of superhigh molecular polyolefin that are solidified by heating. As the bearing rotates, the lubricant oozes out onto the raceway surface in proper quantities, maintaining the lubrication performance for a long period of time. Since the lubrication oil inside CLube maintains the lubrication performance for a long time, it reduces annoying lubricating management work.

Methyl Isobutyl Carbinol or 4 – Methyl – 2 – Pentanol is a kind of chemical compound which is organic and is derived from acetone. In the mining industry, MIBC is popularly used as a frothing agent during the flotation processes of different minerals and also when producing additives of lubricant oils. Compared to other frothing agents, MIBC has a great selectivity and fast kinetics in the flotation process. It produces froths with are dry yet easy to break which increases the efficiency and yield of the mineral.

Methyl Isobutyl Carbinol or 4 – Methyl – 2 – Pentanol is a kind of chemical compound which is organic and is derived from acetone. In the mining industry, MIBC is popularly used as a frothing agent during the flotation processes of different minerals and also when producing additives of lubricant oils. Compared to other frothing agents, MIBC has a great selectivity and fast kinetics in the flotation process. It produces froths with are dry yet easy to break which increases the efficiency and yield of the mineral.

All dies, sold separately. Specially designed frame allows the operator to easily attach fasteners to the unconventional shapes of purses, shoes and more. Requires an air compressor that can put out 150 PSI. Perfect for touch ups. MS 1 Deep Frame Attaching Machine Please note that the price on the machine is unbeatable and considered a great catch because the machine is capable of applying almost everything. it’s absolutely a great investment for all types of business from starters to professionals’ and from moderate to mass production. Additional to the grommets this machine also attaches spring snaps, ring snaps, bebetto snaps, jean rivets, and jean buttons of all styles and sizes we carry. MS 1 works with an air compressor. The machine is delivered already mantled; so once you receive plug it in and attach the air compressor and start attaching. The machine requires the use air lubrication oil and the 150 PSI is required for air pressure

Separable Roller Followers are assembled by combining an outer ring, inner ring and needle roller cage. They can be separated from one another, so handling is easy. Oil lubrication is also easy, making them suitable for highspeed rotations. Two types are available without inner ring RNAST and with inner ring NAST. The inner ring type includes open, shield, and sealed types.

Light-colored piston lubricant with special additives for better adhesion and lubricating properties Type viscous oil Appearence light-coloured Properties and Advantages • increased service life of piston and shot sleeve • economical in use • reduced smoke and gas development

Plunger oil (lubricant) with ultrafine graphite for extremely good adhesion Type medium-viscous graphite oil Appearence black Application drip, spray suitable for "vacuum" die casting Properties and Advantages • well balanced tribological characteristics • despite 10 % graphite in medium-viscous oil product is sprayable and perfectly stable • high pressure resistance • highly efficient, economical in use • protection from erosion • dry-running operation feature • recommended for Caro-Prometa plunger systems

Lubrication of friction and rolling bearings, chains, joints or slideways at higher temperatures For conveying systems under radiation heat in painting, stoving and drying systems, travelling grates in firing systems Dry lubrication at temperatures above 200°C Lubrication of elastomers and plastics not resistant to mineral oil Advantages and benefits Highly suitable as a high-temperature lubricant Very effective due to finest, homogeneous MoS₂ distribution in the oil Resistant to water and many chemicals, fuels, lubricants and hydraulic oils For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. If at all possible, avoid excess. Observe the machine manufacturer's instructions. Assess the lubrication frequency

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors

Fulltech 10W-60, is a synthetic engine oil based on innovative engine oil technology. The modern technology additive technology provides ultra high performance under extreme driving and road conditions. Its special formula offers esay cold starting, highly durable lubricating film and low oil consumption.

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor *optimized drum emptying * Optimized Drum emptying *infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Lubricating oil additive for heavily loaded friction and rolling bearings for increasing the lubricating effect, improving the high-pressure properties and reducing the temperature increase Gear oil additive to guard against gearwheel damage Stops pitting and is especially suitable for gearbox designs with a high percentage of sliding Engine and compressor oil additive for reduced wear and increased operating safety, as run-in and smoothing lubricant Machining oil additive for chip-free or cutting production to increase working speeds and tool life Advantages and benefits Excellently suited as performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous MoS₂ distribution in the oil Broad range of uses with many different oils and alone as a high-performance oil Lowest friction due to high lubricating effectiveness of MoS2 Fully stabilised without precipitation

Delivery hose for crude oil, lubricating oil, diesel oil, petrol and other fuels up to an aromatic content of 50%. Steam cleaning max. 120°C / max. 60 min. Wide range of applications. Kink and abrasion resistant due to vulcanized hose fittings. With 3 or 4 times burst pressure safety. Temperature resistant from –35°C to +110°C. Slight elongation at full load. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral weather-resistant, abrasion-resistant, conductive CR cover Interior smooth, exterior fabric patterned Depending on the application and customer needs, dock hoses are supplied with built-in flanges. Flange dimensions per DIN, ANSI (ASA) or as special bore. Other versions conforming to DIN EN 1765, BS 1435 or other standards and pressure stages on request. Other versions and dimensions on request.

INOX is an independent German lubricant manufacturer for customers in the automotive and industrial sector. We deliver customized high performance lubricants to oil companies, brand owners and distributors with their own company labels. Our highly technological semi-automatic and fully automatic filling lines were developed as special purpose machines specifically for these requirements. As one of our services we provide assistance and specific knowledge to well-known companies in the petroleum industry, to retailers and original equipment manufacturers (OEMs) with after-sales service.

The piston filler is one of the main product of Npack, most of Npack liquid filling dispenser are applying in the fields of Daily chemicals, cosmetics, Food&beverage,personal care products, pharmaceuticals, Oils products.As piston filling machine are solely based on conventional volumetric technology, these are easy to operate and relatively low cost for the majority of the end-use industries. Piston filling machine is one of the most popular liquid filling machine for its universal ability ,piston filling machine can fill thick and highly viscous products, such as chunky, semi-paste, paste products, also extensively utilized to fill chemical preparations, such as adhesives, greases, epoxies, waxes, and lubricant oils, also an optional for filling thin liquid Widely application of liquids, such as viscous liquid, shampoo, lotion,cream;Food sauce;foamy liquid,hand liquid soap,detergent. High Performance and accuracy,easy operation.

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & CuSn10Pb10 | Low-maintenance | DIN 1494 / ISO 3547 BIV-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, the relubrication intervals are greatly reduced! For high loads and oscillating movements as well as for rough operation and temperature load. For technical details, please visit the product page on our website!

Wrapped bronze sliding bearing with lubrication holes/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET®/L is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. The hole depots reduce the relubrication intervals even more! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. For technical details, please visit the product page on our website!