Results for
POR METAL URUNLERI INSAAT TURIZM VE SANAYI TICARET LIMITED SIRKETI
Turkey
It is a simple base lock system designed for linear opening doors. Its structure consisting of arm, connection apparatus and latch enables the wing to be fixed on the bollard. The lock, which is manufactured in a padlockable structure, is offered as a standard material with sliding doors, galvanized.
Request for a quotePOR METAL URUNLERI INSAAT TURIZM VE SANAYI TICARET LIMITED SIRKETI
Turkey
It is a simple locking system designed for circular opening doors. With its structure consisting of an arm, connection apparatus and magnet, its function is only to fix the wing onto the bollard and it does not have a locking feature. The standard color of the material is RAL 9005 and textured paint is preferred.
Request for a quotePOR METAL URUNLERI INSAAT TURIZM VE SANAYI TICARET LIMITED SIRKETI
Turkey
It is a one-way keyed handle lock model that can be fixed from the inside. It is a material that is especially suitable for multi-purpose cabins at an optimum scale. It is mounted on K/B doors by drilling directly into the door leaf, and on BVK doors by using a bracket.
Request for a quotePOR METAL URUNLERI INSAAT TURIZM VE SANAYI TICARET LIMITED SIRKETI
Turkey
It is an alternative locking system from simple base locks to magnet locks, designed for circular opening doors. Its structure consisting of arm, connection apparatus and latch enables the wing to be fixed on the bollard. Manufactured in a padlockable structure, the lock is among the locks offered as standard material with BVK doors, galvanized.
Request for a quotePOR METAL URUNLERI INSAAT TURIZM VE SANAYI TICARET LIMITED SIRKETI
Turkey
It is a classic lock type. It has the feature of being keyed from both directions. It is used especially in K/B doors. It is mounted directly to the slot that opens into the wing without requiring a bracket, the tongue slot is created in the bollard or frame profile.
Request for a quoteFATIH WROUGHT IRON
Turkey
19788 - 2,5x16,5 cm - 0,33 kg 19789 - 3x22,5 cm - 0,61 kg 19790 - 3x28,5 cm - 0,71 kg 19791 - 4x37 cm - 1,00 kg 19792 - 4x59 cm - 1,32 kg
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 0,23 kg Height: 26 cm Width: 12,5 cm Material: 1 mm
Request for a quoteTRIBUNAS & FIGUEIREDO, LDA
Portugal
Production of light metalwork such as railings, doors, and gates among others.
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 1,00 kg Height : 21,5 cm Width : 41,5 cm Material: 6 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 0,98 kg Height: 36 cm Width: 20 cm Material: 3 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 0,16 kg Height: 17 cm Width: 6 cm Material: 3 mm
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV MCB lock dog It may be the easiest and the most common miniature circuit breaker lock for general use. This “switchover lock” is simply collared on the switchoverposition of the MCB. Features: Low cost; Prevent access to the Breaker during maintenance procedures; Extremely easy to install.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.
Request for a quoteTOSYALI MAKINA A.S.
Turkey
A locking device is a mechanical component that prevents mated shafts and other machine elements from moving out of position when subjected to external forces. Operating conditions such as initial installation error, temperature changes, vibration, and others can all cause problems. These are critical components. Our locking devices consist of two interlocking conical rings used in the connection of power and motion transmission organs such as chain hoists, pulleys, sprockets, sprockets, timing gears, couplings, etc., without using wedges. It can transfer low pressure and high torque, and can be installed and disassembled quickly and safely. They are machine fasteners that strongly fix the shaft passing through them and the hubs passing around them by pushing each other in opposite directions by tightening the bolts on the piston rings.
Request for a quoteCLIXAR
Ukraine
PGK is a valve locking device made of polycarbonate and used to restrict access to the valves of taps supplying gas or water. The product consists of two parts that are installed on the tap. To attach the locking device, it is required to put the sealing rope through the special holes on the locking device. The process should be completed by installation of a rotary or latch seal which is securely fastened with a cable to the blocker and also prevents the chance to remove the locking device without any visible signs of damage to the seal. The is used to restrict access to the valves both in residential houses and at industrial sites. And the seal enables you to check whether there was an attempt to open the locking device with the intention to steal gas or water.
Request for a quoteResults for
Locks - Import exportNumber of results
679 ProductsCountries
Company type
Category