Results for
FRANKE GMBH
Germany
Franke Bearing Assemblies Type LVA are ready-to-install bearing assemblies with steel housing rings and integrated bearing element. They are suitable for medium rotational speeds and accuracies. They are available at short notice, some of them even from stock. Designed as 4 point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. Type LVA bearing assemblies are sealed on both sides and adjusted with preload.
Request for a quoteFERPLAST SNC
Italy
SHORT MANUAL PALLET TRUCK MODEL FPBF25 L950 Structure in drawn steel with rounded fork tips. Hydraulic unit built entirely of steel mounted on high precision thrust bearing. Control lever 3 positions with adjustable lowering speed. Lifting operated rudder and automatic recall upright. Safety valves for hoist limit and overload. Directional wheels aluminum with rubber elastic diameter 200 mm. mounted on ball bearings. Load nylon rollers diameter 82 mm with double ball bearings.
Request for a quoteFERPLAST SNC
Italy
SHORT MANUAL PALLET TRUCK MODEL FPBF25 L800 Structure in drawn steel with rounded fork tips. Hydraulic unit built entirely of steel mounted on high precision thrust bearing. Control lever 3 positions with adjustable lowering speed. Lifting operated rudder and automatic recall upright. Safety valves for hoist limit and overload. Directional wheels aluminum with rubber elastic diameter 200 mm. mounted on ball bearings. Load nylon rollers diameter 82 mm with double ball bearings.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of friction and rolling bearings of all kinds at all permissible speeds and subject to high pressure loads, in particular of heavily loaded rolling and taper roller bearings, e.g. on rolling stands, hot and cold shearing systems, sliding blocks and spindles Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to heavy loading Highly effective due to outstanding EP additives and high resistance to water
Request for a quoteFERPLAST SNC
Italy
GALVANIZED MANUAL PALLET TRUCK MOD. FPGS25-G - CAPACITY 2500 Kg. The FGS25-G hand pallet truck is built with a galvanized structure and is therefore suitable for use in the pharmaceutical or chemical industry or in humid or saline environments such as fish markets and fishmongers. The internal pump is made of brass with excellent resistance to humidity and oxidation. This model is characterized by: - Structure in galvanized steel sheet -- Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm. mounted on ball bearings. - Double nylon loading roller diameter mm.
Request for a quoteKIS ANTRIEBSTECHNIK GMBH & CO. KG
Germany
Designed to efficiently support axial and radial forces and tilting moment loads, crossed roller bearings are suitable for applications subject to high loads and speeds. Due to the special crosswise arrangement of the cylindrical rollers in crossed roller bearings, designs with two bearing positions can often be reduced to one. Due to their high rigidity and running accuracy, they offer enormous precision and are used, for example, in robotics, medical technology and lathes. Depending on the application requirements, we at KIS manufacture cross rollers in different configurations. We are happy to advise you on the optimum solution for your application.
Request for a quoteKIS ANTRIEBSTECHNIK GMBH & CO. KG
Germany
With decades of experience, we manufacture spherical roller bearings at KIS that can support large radial and axial forces in both directions. The perfect solution for applications that have to withstand massive loads. Due to the design of two rows of pendulum-shaped rollers in a common, hollow-ball raceway in the outer ring, our spherical roller bearings can support large radial and also axial forces. This makes them perfect for applications that have to withstand high loads and shocks and compensate for shaft bending or misalignment. In addition to conventional spherical roller bearings (which have no seal and have either a tapered or cylindrical bore), there are also application-specific variants developed for special requirements (e.g. sealed spherical roller bearings or bearings with optimised load ratings). Spherical roller bearings offer high performance and efficiency and are available in a wide range of sizes and designs.
Request for a quoteVESTA PETROKIMYA URUN. VE ENERJI SAN. TIC. LTD. STI.
Turkey
This grease is meticulously formulated from highly refined paraffin-based oils and thickened using lithium soap (hydroxystearate). It incorporates antioxidant, anticorrosive, anti-wear, and extreme pressure additives. Ideal for general industrial greasing purposes. Suitable for use in rolling mills. Effective for lubricating couplings, chains, guides, and shearing bearings. Well-suited for all types of load-bearing and vibration-supporting rollers, including those in iron and steel industry mills, rolling mills, mining, and public works machinery. It operates effectively within a temperature range from -20 ºC to 120 ºC.
Request for a quoteVESTA PETROKIMYA URUN. VE ENERJI SAN. TIC. LTD. STI.
Turkey
This grease is meticulously formulated from highly refined paraffin-based oils and thickened using lithium soap (hydroxystearate). It incorporates antioxidant, anticorrosive, anti-wear, and extreme pressure additives. Ideal for general industrial greasing purposes. Suitable for use in rolling mills. Effective for lubricating couplings, chains, guides, and shearing bearings. Well-suited for all types of load-bearing and vibration-supporting rollers, including those in iron and steel industry mills, rolling mills, mining, and public works machinery. It operates effectively within a temperature range from -20 ºC to 120 ºC.
Request for a quoteVESTA PETROKIMYA URUN. VE ENERJI SAN. TIC. LTD. STI.
Turkey
This grease is meticulously formulated from highly refined paraffin-based oils and thickened using lithium soap (hydroxystearate). It incorporates antioxidant, anticorrosive, anti-wear, and extreme pressure additives. Ideal for general industrial greasing purposes. Suitable for use in rolling mills. Effective for lubricating couplings, chains, guides, and shearing bearings. Well-suited for all types of load-bearing and vibration-supporting rollers, including those in iron and steel industry mills, rolling mills, mining, and public works machinery. It operates effectively within a temperature range from -20 ºC to 120 ºC.
Request for a quoteVESTA PETROKIMYA URUN. VE ENERJI SAN. TIC. LTD. STI.
Turkey
This grease is meticulously formulated from highly refined paraffin-based oils and thickened using lithium soap (hydroxystearate). It incorporates antioxidant, anticorrosive, anti-wear, and extreme pressure additives. Ideal for general industrial greasing purposes. Suitable for use in rolling mills. Effective for lubricating couplings, chains, guides, and shearing bearings. Well-suited for all types of load-bearing and vibration-supporting rollers, including those in iron and steel industry mills, rolling mills, mining, and public works machinery. It operates effectively within a temperature range from -20 ºC to 120 ºC.
Request for a quoteKFB CLARFELD GERMANY GMBH
Germany
require high precision, large rated moving load, and high maximum rotation speed. By adopting the new technology of material processing, KFB has successfully manufactured bearings of long service life that are highly fatigue resistant and impact resistant. The types of bearings made by KFB for the metallurgical roller mills are: split bearings; unit rollers; support roller bearings; single row, double row, three row, four row cylindrical roller bearings, fully-loaded cylindrical roller bearings, spherical roller bearings. The use of split bearings appreciably facilitates assembly and repair operations compared to the use of nonsplit (conventional) bearings. It does away with the need for the disassembly and subsequent reassembly of intermediate parts and mechanisms, which is required when replacing conventional bearings. It also reduces costs and production losses. If provided with efficient cooling, reliable lubrication and proper sealing, split-bearing components can be used...
Request for a quotePATRY
France
MOUNTING 97.1: Wheel mounted on ball bearings, the axle is smooth and removable. MOunting 97.2: Wheel mounted on taper roller bearings, the axle is not removable. These wheels can also be mounted: 1. on an axles with external bearers (see p. 42 of the catalogue) 2. mounted with bearings in bearers, which permits motorisation (see p. 44 of the catalogue) The ball bearings (mounting 97.1) withstand lower loads than the taper roller bearings (mounting 97.2). The taper roller bearings do not permit removal of the axle from the wheel.
Request for a quoteROS ROLLENTECHNIK GMBH
Germany
ROS heavy load rollers with external bearings are used for conveying both unit loads and bulk material at medium to high loading levels. In addition to the driven version, diverse options are available for combining the individual components, depending on the specific requirement.
Request for a quoteROS ROLLENTECHNIK GMBH
Germany
In addition to precision deep groove ball bearings, ROS also employs self-aligning ball bearings and spherical roller bearings for its heavy load rollers with internal bearings. In addition to a selection of different tube and shaft designs, powered rollers are also available for use.
Request for a quoteROS ROLLENTECHNIK GMBH
Germany
ROS heavy load rollers with external bearings are used for conveying both unit loads and bulk material at medium to high loading levels. In addition to the driven version, diverse options are available for combining the individual components, depending on the specific requirement.
Request for a quoteROS ROLLENTECHNIK GMBH
Germany
In addition to precision deep groove ball bearings, ROS also employs self-aligning ball bearings and spherical roller bearings for its heavy load rollers with internal bearings. In addition to a selection of different tube and shaft designs, powered rollers are also available for use.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
These bearings are doublerow, full complement with a low cross sectional height designed for use in sheaves. There are two types, sealed and shield type. They can withstand heavy radial loads and shock loads at comparatively lowspeed rotations, and can also withstand axial loads. It is easy to fix them axially to sheaves using the stop rings of the outer ring. The width of the inner ring is designed to be larger than that of the outer ring, so they require no spacer between sheaves. The structure is stable because the doublerow of rollers can withstand the moment loads caused by rope transition. The surfaces of these bearings are also treated to provide high corrosion resistance.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Roller Bearings are heavy duty bearings with rollers incorporated in a double row. They are nonseparable bearings with a high load rating. They can withstand not only radial loads but axial loads as well, which are supported at the contacts between the shoulders of the inner and outer rings and the end faces of the rollers. They should be used at the fixing side of a shaft. Like needle roller bearings, they are also compact. Roller bearing types include caged, full complement and the type for sheaves, and they can be selected based on the operating conditions. These bearings are used in heavyduty machinery such as construction equipment, and industrial machines.
Request for a quoteFÖHRENBACH GMBH
Germany
The series of RT2A distinguishes by compact design with integrated precision roller bearing and worm drive. The rotary tables are sealed, IP 50 and can be driven in all fitted positions. For the mounting, standard drilling plans and special mounting flange and clamps can be used. Different limit switches are available: Standard: reference impulse, PNP-NC, 2 channel.
Request for a quoteFÖHRENBACH GMBH
Germany
The new designed rotary swivel unit RT2A is the ideal solution for retrofitting your machine with a 4th and 5th axis. It is based on the proven and robust rotary tables of the RT2A series. The design is kept very compact to ensure the best possible use of space with high load capacity. The rotary tables are equipped with an integrated precision roller bearing, which ensures high torque capacity, radial and axial run-out accuracy. The rotary swivel unit RT2A is available in the size variants RT2A150/200 and RT2A100/150. Various stepper or servo motors can be used as drives. In addition, various types of end or reference point switches are available. The swivel range of the swivel axis can be individually defined, the rotary axis can be rotated without limit. Thus the RT2A rotary swivel unit combines all the advantages of a field-proven standard product with the flexibility of a special version.
Request for a quoteFÖHRENBACH GMBH
Germany
A lever clamping permits a simple, fast and exact adjusting of different working levels, without any efforts to adapt the devices. The swivel unit is available for the rotary tables RT2A075, RT2A100, RT2A150 und RT2A200. Field of applications: Assembly technologies, measuring and testing equipments, laser writing, welding, cutting, as well as special mechanical engineering. Features (RT2A100, RT2A200): Individually adjustable swiveling range from -5° to +95°. Fixed stop iin the 0° and 90°. Other positions possible by customer request. Clamp and locking effect through laterally installed, adjustable clamping lever. On one side appropriate scaling in 1° steps. Fixing of the swivel unit through four countersinking holes in the base plate.
Request for a quoteFÖHRENBACH GMBH
Germany
Rotary tables with direct drive series RT3 The rotary tables with direct drive are available in different types: RT3A100x100, RT3A100x155, RT3A080x130, RT3A150x100, RT3A150x130, RT3A250x170, RT3A200x060 und RT3G630x225 Rotary tables RT3G630 – high dynamics, high precision, high loading capacity This direct driven rotary table RT3G630 has particularly been developed for machine tool industry and assembly machines. It is characterised by its high precision, highdynamics and its high loading capacity. The rotary table is driven by a permanently excited 3-phase synchronous motor. The rotary plate and the housing are made of gray cast iron.
Request for a quoteFÖHRENBACH GMBH
Germany
While the conventional drives are dependent on an external controller unit, for the compact drives no additional controller is needed. The complete electrical parts, including the drive controller and encoder, are integrated on the motor board. Programming is done via standard PC using free software. The operation can be done without a PC, the created driving programs are stored in the compact drive and can be accessed via a separate input. Compact design Integrated motor controller and encoder RS485 or CANopen Interface Operating modes: positioning, speed, flag-position, clockdirection, analog, analog position, torque Position monitoring with automatic error correction up to 0,9° Step resolution max. 1/64 Integrated temperature monitoring Step frequency 0-50 kHz at clock-direction-mode and 0-25 kHz at the other modes
Request for a quoteFÖHRENBACH GMBH
Germany
This multisided applicable precision rotary table is available in installation size of 300 mm of rotary plate diameter. The rotation plate is stored by a tempered roller-bearing. This enabled high moment rigidity within the radial and axial range as well as free positioning at less friction moments. The drive takes place alternatively via stepper- or AC servomotors by a hardened and polished precision worm with a worm wheel of bronze. The rotary table is horizontal and vertically applicable by standard drilling plan and bolting face.
Request for a quoteFRANKE GMBH
Germany
Franke bearing asseblies type LVG are bearing assemblies made of aluminum, designed as double row angular contact roller bearings with integrated bearing elements. LVG bearing assemblies are suitable for the highest load ratings. They convince by high rigidity, low rotational resistance and low weight. Designed as roller bearings, they can support high loads from all directions and are insensitive to shocks and vibrations. Franke LVG are sealed on both sides and are set with preload. By using aluminum, Franke beaing assemblies type LVG are 60% lighter than comparable steel bearings.
Request for a quoteNORELEM FRANCE
France
Housing washer, shaft washer and rolling elements, bearing steel. Cage, steel. Note Axial ball bearings accept high axial loads from one direction but may not be loaded radially. The bearings are separable. This means the bearing parts can be fitted independently of each other. The main dimensions of the axial ball bearing conform to ISO 104 and DIN 711. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications.
Request for a quoteResults for
Load-bearing rollers - Import exportNumber of results
45 ProductsCompany type