Liquid co2 - Import export

• Small required space • Integration in injection molding machines, especially for in-mold-decoration • Easy installation on robots, linear axle and brackets • Separate 24V control of compressed air and CO2 • Liquid CO2 supply with CO2 cylinder bundles including dip tube or CO2 tanks • Short response time due to additional CO2 valve on the nozzle • Automated cleaning of injection molds, metal and plastic parts

The ASCO CO2 Dew Point Tester reliably indicates the dew point (moisture content) of your CO2. This equipment makes it easy to measure the dew point of liquid and gaseous CO2. A laminated, illustrated stepbystep short instruction sheet in A3 format and a detailed instruction manual are supplied with each tester. The ASCO CO2 Dew Point Tester (stainless steel) can be used either wallmounted or freestanding. easy handling no calibration required ready for immediate use for gaseous and liquid CO2

The ASCO CO2 Carbonation Tester is used to identify any strange odour and/or taste in CO2. With this simple, easy to use kit you can check the quality of your liquid or gaseous CO2 from bulk tanks or CO2 cylinders. The set includes a CO2 carbonation unit, CO2 cartridge with special inner coating, adaptors made of stainless steel and emptying device for CO2 cartridge and easy instructions. Following the easy, laminated an coloured stepbystep instructions with pictures, a sample of water carbonated is tested. The carbonated water is compared for taste and smell with a noncarbonated sample of the same water. easy handling no calibration required ready for immediate use quick and cheap testing method for gaseous and liquid CO2

ASCO CO2 Gas Revert Recovery Systems are engineered to efficiently recover the revert CO2 gas from ASCO Dry Ice Pellet and Block Machines which normally direct the revert (flash) gas to the atmosphere. When dry ice is produced the conversion rate from liquid CO2 to dry ice is approx. 4045 %. This means 5560 % is lost to the atmosphere. This conversation rate is a physical fact and therefore, unfortunately, not to change. With a CO2 Revert Recovery System, however, most of the CO2 can be recovered which leads to a final conversion rate of approx. 9095 %. This way, the dry ice production costs are reduced up to 50 %.

The ASCO LH900 Liquid CO2 Filling Pump has been developed as an universal unit for filling high pressure CO2 cylinders by weight. Like all ASCO Equipment, the Cylinder Filling and Weighing System is thoroughly factory pretested before despatch. Thanks to the separate control unit, the pump can be placed in a different location. Easy operation Switch on your ASCO LH900 and the unit automatically tares itself to „0“ which will show on the indicator display. After placing a cylinder on the platform, the display will show the accurate tare weight of the cylinder, allowing the operator to check whether the empty cylinder weight is correct. The chosen filling weight can now be set on the display by pressing the relevant keys (when filling the same size of cylinder, the filling weight needs only be entered once). When the desired filling weight is reached and displayed, the solenoid valves of the ASCO LH900 will automatically switch to run the system in bypass.

The ideal and reliable highflow CO2 pressure reducing valve for use with CO2 gas or liquide. Constructed in brass (C31) and meehanite (C2K32) with stainless steel trim Abrasion and dirt resistant rubber valve seats Dome loading either from inlet line or separate gas supply Stable and noiseless operation Positive gastight shutoff Highflow contoured passages

PharmaHemp® premium CBD e-liquid contains purified CO2 extract and selected flavours that are dissolved in pharmaceutical grade solvents. The product contains a high concentration of CBD, a wide range of other cannabinoids and bioactive compounds creating an ‘entourage effect’.

TETRASOL is an aqueous solution of purified potassium salts of tetrahydroiso-humulone produced from the alpha-acid fraction of a hop liquid CO2 concentrate extract in an all aqueous process. The product is free of any solvent residues. The benefits of the use of TETRASOL in comparison with traditional hopping are high flexibility in beer bitterness adjusting, improved foam, enhanced cling and light-stability. AVAILABILITY TETRASOL is available in 10% (+/- 0.5%) tetrahydroiso-humulones in aqueous solution ready for direct addition to beer without pre-warming nor dilution. DILUTION If dilution is desired for metering pump requisites for example TETRASOL chould be diluted 10 times. Soft or deionized water equal to nine times the weight of TETRASOL 10 is needed. (Hard water may cause cloudiness). The pH of the soft water is adjusted to 10 to 11 using potassium hydroxide. The 1:9 dilution is prepared by slowly adding the weighed amount of TETRASOL to the stirred soft pH10-11 water (T...

TETRASOL is an aqueous solution of purified potassium salts of tetrahydroiso-humulone produced from the alpha-acid fraction of a hop liquid CO2 concentrate extract in an all aqueous process. The product is free of any solvent residues. The benefits of the use of TETRASOL in comparison with traditional hopping are high flexibility in beer bitterness adjusting, improved foam, enhanced cling and light-stability. AVAILABILITY TETRASOL is available in 10% (+/- 0.5%) tetrahydroiso-humulones in aqueous solution ready for direct addition to beer without pre-warming nor dilution. DILUTION If dilution is desired for metering pump requisites for example TETRASOL chould be diluted 10 times. Soft or deionized water equal to nine times the weight of TETRASOL 10 is needed. (Hard water may cause cloudiness). The pH of the soft water is adjusted to 10 to 11 using potassium hydroxide. The 1:9 dilution is prepared by slowly adding the weighed amount of TETRASOL to the stirred soft pH10-11 water (T...

ISOHUMULEX is an aqueous solution of purified potassium salts of isohumulones produced from a liquid CO2 concentrate extract of hops in an all aqueous process. The product is free of any solvent residues. The benefits of the use of ISOHUMULEX in comparison with traditional hopping are high flexibility in beer bitterness adjusting, improved foam and enhanced cling. AVAILABILITY ISOHUMULEX is available in 10% and 20% (+/- 0.5%) isohumulones-UV in aqueous solution. DILUTION ISOHUMULEX can be used directly or can be diluted (for example 10 times). Soft or deionized water is needed. (Hard water may cause cloudiness). The pH of the soft water is adjusted to 10 to 11 using potassium hydroxide. The 1:9 dilution is prepared by slowly adding the weighed amount of ISOHUMULEX to the stirred soft pH10-11 water (T = 50°C). ADDITION The recommended addition point is at any point between the end of fermentation and the final filtration. The recommended procedure, injection of the aqueous...

LT Liquid cooled systems are designed to supplement the existing refrigeration arrangement with an already installed chiller. This unit can be cooled by glycol provided from a currently existing chiller and provide additional low temperature cooling. It is perfect for achieving particularly low refrigeration temperatures that can go down to -35 °C degrees. Such solutions are mostly used for warehouse cooling and other industrial applications. GREEN SOLUTIONS | This unit is a part of Refra‘s environmentally friendly product group, as it is made using natural refrigerants. Such low GWP solutions are designed to have better efficiencies and capacities, as well as less environmental damage.

Flexible foams are elastic PU foams that are used in many different applications thanks to their usually excellent padding properties. In addition to the seating furniture industry, applications include motor vehicle and rail vehicle seats. However, they can also be used in seals and loaded damping components. Typical properties Moulded part density of 40–250 kg/m³ Adjustable compression load deflection Dimensional stability under heat up to 100°C Water is usually used as the foaming agent, but liquid CO2 is also possible Special formulations and versions Viscoelastic Barium sulphate loaded for acoustic applications, e.g. in aviation FIPFG seals for PU high-pressure processing Dimensional stability under heat up to 150°C in special applications Emission-free pursuant to RAL-ZU 38 Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S3, SR2, ST2), EU TL 45545 Aircraft construction: ABD 0031, FAR 25.853 Furniture industry: California 117 Section A Part 1