Line filter - Import export

ESSBFS / ESSBFCS Suction Line Filter Drier Series are hermetic Filter Drier in compacted bead style for use on suction line. ESSBFS Series is designed for CFC and HCFC refrigerants with mineral and alkyl benzene oils. At the same time they are compatible with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants and blends. ESSBFCS Series are the Suction Line Filter Driers for the systems using CO2 (R-744) as a refrigerant. Moisture removal formula, is prepared as %70 Molecular Sieve and %30 Activated Alumina targeting maximum moisture and acid removal from the system. ESSBFS / ESSBFCS are designed for the removal of the moisture and acidity and / or removal of the acidity formed after the burn-out of the compressor. ESSBFS / ESSBFCS Series have solder type connection, – Extremely high water adsorption capacity compared to others brands, – High acid adsorption / preventation capacity, – 1/4″ Schrader unions on the inlet and outlet, providing easy and fast tracking,

Mikropor Compressed Air Filters have been designed to meet all requirements of the compressed air filtration world. These air filters provide more comfortable usage for end users with an increased endurance, higher efficiency at lower pressure drop and more port size options.The air filters have four efficiency ratings, removing contaminants as small 0.01 micron at up to 290 psi (20 bar)- 1/4” to 3” NPT/BSP pipe sizes. A protected auto float drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants. These air filters have a zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion-resistant internal coating for a long service life. Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards. These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency.

ESSDC / ESSDCS / ESSDMC / ESSDMCS Filter Drier Series are hermetic Filter Drier in compacted bead style for use on liquid line. ESSDTMC / ESSDTMCS Filter Drier Series are hermetic Filter Drier in compacted solid core for use on liquid line. ESSDC / ESSDCS / ESSDMC / ESSDMCS Series are designed for use with CO2 (R-744) in “Subcritical Zone”. Moisture removal formula, is prepared as %100 Molecular Sieve in ESSDMC, ESSDMCS, ESSDTMC and ESSDTMCS Series, %80 Molecular Sieve and %20 Activated Alumina in ESSDC and ESSDCS Series targeting maximum moisture removal and acid formation prevention. ESSDMC, ESSDMCS, ESSDTMC and ESSDTMCS Series are compatible with POE oils and additives. Properties: – ESSDC / ESSDMC / ESSDTMC Series have 45° flare type connection, – ESSDCS / ESSDMCS / ESSDTMCS Series have solder type connection, – Extremely high water adsorption capacity compared to others brands, – High acid preventation capacity

Qzer mouds series green line patterned quality FFP2 mask Our topquality mouth masks are made with trusted and durable materials. protection design uses a cotton inner layer, meltblown fabric in middlelayer, and nonwoven outer layer for premium protection, ensure full coverage of your nose and mouth.Comfortable & Breathable Soft elastic ear hooks eliminate the pressure on ear, nonpigmented super soft cotton inner is gentle on the skin, easy to put on and take off, will not cause discomfort or irritation even if wear it all day. Daily Protection Keeping you away from pollutants, and is also perfect protects against pet or pollen, and help prevent coughing and sneezing water from entering the nose and mouth.MultiUSE Designed for nonmedical use, can be used by painters and construction workers to prevent dust, pollen and other.

Balance performance and protection for optimal infusion therapy POREX ® infusion therapy set filters and vents provide the perfect balance of performance and protection for optimal infusion therapy with reduced risk of infection. Critical components of our infusion therapy solutions include: POREX ® spike vents - Complete efficient delivery of the dose solution without impacting the physical stability or introduction of microbes or foreign matter, thereby protecting the medical professional from infection and drug exposure. POREX ® in-line filters - Hydrophilic membrane protects against accidental air intrusion into the infusion line. POREX® primer vent - Hydrophobic membrane with 1.2 micron pore size that allows air to pass through but stops fluid and provides a barrier to contact contamination.

Balance performance and protection for optimal infusion therapy POREX ® infusion therapy set filters and vents provide the perfect balance of performance and protection for optimal infusion therapy with reduced risk of infection. Critical components of our infusion therapy solutions include: POREX ® spike vents - Complete efficient delivery of the dose solution without impacting the physical stability or introduction of microbes or foreign matter, thereby protecting the medical professional from infection and drug exposure. POREX ® in-line filters - Hydrophilic membrane protects against accidental air intrusion into the infusion line. POREX® primer vent - Hydrophobic membrane with 1.2 micron pore size that allows air to pass through but stops fluid and provides a barrier to contact contamination.

Balance performance and protection for optimal infusion therapy POREX ® infusion therapy set filters and vents provide the perfect balance of performance and protection for optimal infusion therapy with reduced risk of infection. Critical components of our infusion therapy solutions include: POREX ® spike vents - Complete efficient delivery of the dose solution without impacting the physical stability or introduction of microbes or foreign matter, thereby protecting the medical professional from infection and drug exposure. POREX ® in-line filters - Hydrophilic membrane protects against accidental air intrusion into the infusion line. POREX® primer vent - Hydrophobic membrane with 1.2 micron pore size that allows air to pass through but stops fluid and provides a barrier to contact contamination.

Balance performance and protection for optimal infusion therapy POREX ® infusion therapy set filters and vents provide the perfect balance of performance and protection for optimal infusion therapy with reduced risk of infection. Critical components of our infusion therapy solutions include: POREX ® spike vents - Complete efficient delivery of the dose solution without impacting the physical stability or introduction of microbes or foreign matter, thereby protecting the medical professional from infection and drug exposure. POREX ® in-line filters - Hydrophilic membrane protects against accidental air intrusion into the infusion line. POREX® primer vent - Hydrophobic membrane with 1.2 micron pore size that allows air to pass through but stops fluid and provides a barrier to contact contamination.

Balance performance and protection for optimal infusion therapy POREX ® infusion therapy set filters and vents provide the perfect balance of performance and protection for optimal infusion therapy with reduced risk of infection. Critical components of our infusion therapy solutions include: POREX ® spike vents - Complete efficient delivery of the dose solution without impacting the physical stability or introduction of microbes or foreign matter, thereby protecting the medical professional from infection and drug exposure. POREX ® in-line filters - Hydrophilic membrane protects against accidental air intrusion into the infusion line. POREX® primer vent - Hydrophobic membrane with 1.2 micron pore size that allows air to pass through but stops fluid and provides a barrier to contact contamination.

Balance performance and protection for optimal infusion therapy POREX ® infusion therapy set filters and vents provide the perfect balance of performance and protection for optimal infusion therapy with reduced risk of infection. Critical components of our infusion therapy solutions include: POREX ® spike vents - Complete efficient delivery of the dose solution without impacting the physical stability or introduction of microbes or foreign matter, thereby protecting the medical professional from infection and drug exposure. POREX ® in-line filters - Hydrophilic membrane protects against accidental air intrusion into the infusion line. POREX® primer vent - Hydrophobic membrane with 1.2 micron pore size that allows air to pass through but stops fluid and provides a barrier to contact contamination.

Balance performance and protection for optimal infusion therapy POREX ® infusion therapy set filters and vents provide the perfect balance of performance and protection for optimal infusion therapy with reduced risk of infection. Critical components of our infusion therapy solutions include: POREX ® spike vents - Complete efficient delivery of the dose solution without impacting the physical stability or introduction of microbes or foreign matter, thereby protecting the medical professional from infection and drug exposure. POREX ® in-line filters - Hydrophilic membrane protects against accidental air intrusion into the infusion line. POREX® primer vent - Hydrophobic membrane with 1.2 micron pore size that allows air to pass through but stops fluid and provides a barrier to contact contamination.

We produce basket filters and wire basket inserts of any kind according to customer specifications. Normally perforated plates with round or square perforation as well as wedge wire elements serve as base bodies. The filter baskets are lined inside or covered outside with plain or with pleated wire cloth, according to customer requirement.

Efficient, High-Volume Fluid Filtration Systems PRAB’s line of vacuum filters eliminate high sludge volume produced in machining centers and grinding applications. Systems range from standard off-the-shelf units to custom-engineered designs, with filtration capability up to 3,000 GPM for efficient, high volume fluid filtration.

Low-profile, cost-effective filtration technology for solids filtration. Low-profile solid/liquid separation of ferrous and non-ferrous metals perfect for grinding applications with flow rates up to 130 gpm. Paper bed filters remove particulate down to 5-microns, prolonging coolant and tool life. Filtered fluid can be reused or recycled lowering operational costs. Standard units ship in 5 days or less. Extend tool life by an average of 27%, improve surface finish and prolong coolant life with PRAB’s line of paper bed filters. Standard paper bed filtration systems are available with flow rates up to 130 gpm with different classes of filter fabric allowing for adjustments of micron clarity. The disposable filter rolls are suitable for applications of low to medium stock removal of ferrous and non-ferrous metals, as well as organic and inorganic contaminants, such as glass, rubber and plastic. Drum-type models occupy one-third the floor space and can process up to 500 gpm of fluids

Main Parameters: -5.6 inch TFT screen -Pretty and very light -Full digital imaging technology, crystal-clear Image -Display screen: 5.6" TFT colr screen -Scanning manner: Electronic convex array, electronic linear array -Working frequency: 2.0MHz~10MHz -Display mode: B, B+B -Scanning range: Convex array 60°~150° -Amplification factor:1.0, 1.2, 1.5,2.0 -Image processing: 8 γ corrections, frame correlation, point correlation, line correlation, digital filtering, digital edge enhancement and pseudo color processing, etc -Conventional measurements: distance, perimeter, area, volume -Obstetric measurement: horses, cattle, sheep, dogs, cats obstetric measurement -Image gray-scale: 256 levels -Scanning line number: 512 lines/frame -Frame rate: 30 frames/second -Digital scanning conversion: 512×512×8 bits -Battery capacity: 3000mAH/7.4V,can work more than 2 hours -Memory capacity: 8GB, can optional to 32GB -Report function: auto make report -Output interface: USB port, video.

Main Parameters: -Display size: 7 inch TFT -Scanning manner: Electronic convex array, electronic linear array -Working frequency: 2.0MHz~10MHz -Display mode: B, B+B, B+M, M, 4B -Scanning range: Convex array 60°~150° -Amplification factor:1.0, 1.2, 1.5,2.0 -Gain control: 8 segments TGC and overall gain can be adjusted respectively -Image processing: 8 γ corrections, frame correlation, point correlation, line correlation, digital filtering, digital edge enhancement and pseudo color processing, etc -Image gray-scale: 256 levels -Scanning line number: 512 lines/frame -Frame rate: 30 frames/second -Digital scanning conversion: 512×512×8 bits -Memory capacity: ≥2GB -Conventional measurements: distance, perimeter, area, volume -Obstetric measurement: horses, cattle, sheep, dogs, cats obstetric measurement -Report function: auto make report -Battery capacity: 3000mAH/7.4V,can work more than 2 hours -Display screen: 7" TFT -Output interface: USB port, video.

Module vertical bag filters constitute a line of traditional de-dusting units with bags attached in a vertical system. They are intended to extract dry dust from gases in all industry sectors. They are characterized by ability to purify great quantities of gases. BENEFITS •An advanced way gases are entered ensures their uniform flow into all of the bags. •Downstream direction of certain quantity of gases supports falling of the dusts in the filter's chamber. •Both-side filtrating bags positioning and preventing them from their displacement eliminates effect of mechanical wear in case ends of bags contact each other. It is very important in case of long bags. •Modern regeneration system - Twin-jet enables applying of purified gas originating from the filter clean chamber to carry out this process. In this way efficiency of regeneration grows up and, at the same time, compressed air consumption goes down.

STAUFF Return Line Simplex Filters SRFL-SW are specially developed for direct installation into the pipeline of industrial water cycles. Depending on their size, SRFL-SW filter housings are suitable for nominal flow rates up to 13.330 l/min / 3.300 US GPM at a maximum operating pressure of 16 bar / 232 PSI. The SRFL-SW have been designed to be used in the steel industry for pre-filtering or coarse filtering in descaling plants. For use with deminerlised water we recommend the Return Line Filters SRFL-SW in Stainless Steel. The filter element construction as a Stainless Steel basket screen filter ensures a long service life. Valves (available as an option) ▪ Drain valve Clogging Indicator (available as an option) ▪ Differential pressure gauge Filter Elements ▪ Filter elements of REL series Construction ▪ Industrial filter, designed for in-line applications in water cycles ▪ Version: Simplex Operating Pressure ▪ Max. 16 bar / 232 PSI Nominal Flow Rate ▪ Max. 13330 l/min / 3521 US...

STAUFF RFS Carbon Steel Return Line Filters are designed as tank top or in-line filters. They are mounted directly on the tank top and if 100% of the system oil is filtered, they provide the optimum removal of contaminants from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed with a connection, threaded or flanged, for extending the return oil beneath the surface thus preventing the entrainment of air. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 365 PSI Nominal...

STAUFF RFB Return Line Filters are designed as tank top filters. They are mounted directly on the tank top and if 100% of the system oil is filtered they provide the optimum removal of contaminant from the system. This provides the pump with clean oil thus reducing contaminant generated wear. Because of it’s low weight and compact design, the STAUFF RFB Filters are ideally suited for mobile hydraulic applications. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Air Filter Element (available as an option) ▪ Filter paper micron rating 10 µm, other filter materials and micron ratings on request Filter Bowl with Threaded Connection (available as an option) Filter...

STAUFF RTF10/25 Return Line Filters are designed as tank top filters with a maximum operating pressure of 3,4 bar / 49 PSI. STAUFF RTF20 Return Line Filters are designed as tank top filters with a maximum operating pressure of 10 bar / 145 PSI and flow rates up to 115 l/min / 30 US GPM. The filter bowl is designed to return the oil beneath the surface thus preventing entrainment of air. RTF20 series compact design and integral breather make them ideal for mobile hydraulic applications. STAUFF RTF40 Return Line Filters are designed as tank top filters with a maximum operating pressure of 6,9 bar / 100 PSI. The filter bowl is designed to return the oil beneath the surface thus preventing entrainment of air. The Filter Elements RTE-48 interchange with the popular “K” series and Filter Elements RTE-49 interchange with the“RE-409” series elements. STAUFF RTF50 Return Line Filters are designed for tank top applications with a maximum pressure of 6,9 bar / 100 PSI. The fi lter bowl is...

STAUFF Return Line Filters RF are designed as tank top filters. They are mounted directly on the tank top and when 100% of the system's oil is filtered they provide the optimum removal of contamination from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed to return the oil beneath the surface thus preventing the entrainment of air by the returning oil. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection ( available as an option ) Filter Bowl with Threaded Connection ( available as an option ) Filter Elements ▪ Filter elements of RE series Construction ▪ Return...

STAUFF RFA Return Line Filters are a one piece design and can be used as a tank top or an in-line filter. They are mounted in the return line and if 100% of the system oil is filtered, provide the optimum removal of contaminant for the systems. This provides the pump with clean oil, thus reducing contaminant generated wear. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection (available as an option) Filter Bowl with Threaded Connection (available as an option) Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 265 PSI Nominal Flow Rate ▪ Max. 110 l/min / 30 US...

STAUFF Return Line Simplex Filters SRFL-S and Duplex Filters SRFL-D are designed for in-line hydraulic applications. With its compact construction and the easy to maintain assembly the SRFL-S and SRFL-D Filters are suitable for flow rates up to 7000 l/min / 1850 US GPM. The two housings of the Duplex Filter SRFL-D are connected with a special gate valve that is operated with a level or hand wheel. Therefore the filter may be serviced without shutting down the hydraulic system. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Differential pressure switch with visual gauge indicator Filter Elements ▪ Filter elements of RE series Construction ▪ Two versions: Simplex or Duplex ▪ With switch control for maintenance...

STAUFF provides a complete range of Spin-On filters which can be used either as suction filters or as return line filters for low pressure applications. The various ranges meet international standards. The corresponding STAUFF Filter Elements are available from stock. Clogging Indicators (available as an option) ▪ Visual clogging indicator with coloured segments ▪ Electrical clogging switch ▪ Other types available on request Constructions ▪ In-line Spin-On filter head ▪ In-line Double Spin-On filter head ▪ Tank Top Spin-On filter head Operating Pressure ▪ Max. 14 bar / 200 PSI Nominal Flow Rate ▪ Max. 460 l/min / 120 US GPM Connections ▪ Option of BSP, NPT, SAE flange or SAE thread, others on request Material ▪ Filter head: Aluminium Media Compatibility ▪ Mineral oils, other fluids on request

ISO ePM10ISO ePM1 / M6F9 stable, twosided hot meltsealed filter plates closely pleated, progressivelystructured filter media synthetic, multilayer microspunbond INTERMELT pleating system rugged KALTHOFF filter casing of black plastic 25 mm flange profile high dustholding capacity resistant to high humidity arbitrary installation position enables easy installation high filter efficiency with low pressure drop

ISO ePM10ISO ePM1 / M6H11 stable, multisided sealed filter plates closely pleated, progressivelystructured filter media synthetic, multilayer micro spunbond INTERMELT pleating system rugged KALTHOFF filter casing with blue vertical struts 25 mm flange profile very high levels of mechanical strength and stability, with high efficiency burst pressure clearly above 3000 Pa high dustholding capacity resistant to high humidity arbitrary installation position enables easy installation high filter efficiency with low pressure drop

ERC Flow Guard Premium is a flow enhancer with very good mixing behaviour for the use of diesel fuel and heating oil in the winter. THE EFFECT Heating oil and diesel fuel are already relatively winter-proof, but when it is very cold, the contained paraffins can separate and agglomerate. Consequently, they clog lines and filters, in which case the heating system or the engine no longer runs properly or can even shut down. THE RESULT ERC Flow Guard Premium contains so-called nucleating agents which are available in surplus in the cooling paraffin condensation cores. As a result, smaller growth crystals form instead of larger. The minuscule growth crystals can easily pass through lines and filters without causing clogging. In addition, a surface limiter envelops the paraffin crystals and keeps them in suspension. As a result, larger clumps cannot form at a later time, either.