Results for
LÖDIGE INDUSTRIES GMBH
Germany
Lödige Industries has more than 70 years’ experience in heavy goods lifting. Our Aircraft lifting equipment is known for its reliability, accuracy and durability. Reliable equipment for raising staff to the aircraft to enable your team to work on the undercarriage, access the cabin and all assembly areas. Mobile or fixed Lödige lifting platforms ease and speed up the painting of aircrafts. We have also developed lifting equipment for working on the aircraft interior.
Request for a quoteIGUS® GMBH
Germany
Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space
Request for a quoteFERPLAST SNC
Italy
DOUBLE PANTOGRAPH WHEELED PLATFORMS Double pantograph lifting platforms with pedal pump, 4 wheels, 2 fixed and 2 pivoting, holding brake, chrome handle for pushing, hand lever for the descent at a controlled rate, enamel paint dried in the oven.
Request for a quoteFERPLAST SNC
Italy
Mechanical platform with wheels and single pantographwith actuation by crank. The platform consists of a sturdy steel frame and is equipped with polyurethane wheels with locking brake. The movement ascent and descent takes place through the actuation of a crank with threaded pin which opens and closes the pantograph. Turning the handle clockwise opens the pantograph and the platform is lifted, naturally turning counterclockwise this lowers. (is the system of mechanical cric). The mechanical crank platform is used primarily as a work surface and where you have to make a few lifting because it is slower than the hydraulic models. It 'also suitable for assembly of molds or mechanical components in tight spaces because it does not have the the driving tiller and is not bulky.
Request for a quoteFERPLAST SNC
Italy
ALUMINUM LIFT TABLE Aluminum lift table, lightweight and practical with 100 kg capacity and maximum lifting height mm. 755. Folding handle.
Request for a quoteLAWECO MASCHINEN- UND APPARATEBAU GMBH
Germany
LAWECO lift platforms are mainly used for rationally stacking and destacking wood up to a stack weight of 120 tons. Additional typical applications include overcoming height differences as well as rapid raising and lowering of individual pallets. In use with a two-floor magazine
Request for a quoteFERPLAST SNC
Italy
The HD series lifting platforms are lifting equipment to be installed in a fixed position and are driven by an electro-hydraulic control unit. The double pantograph structure allows a high stroke and reduced overall dimensions (only the minimum height increases). Built according to accident prevention guidelines, they are equipped with a fall protection valve and a safety perimeter. General characteristics: Very robust structure in painted steel Construction according to CE safety standards Upper platform in smooth sheet Aluminum safety perimeter on the upper platform High quality hydraulic power unit, internally positioned, designed for intermittent use of 30% Push-button panel with low voltage controls Hydraulic system with safety valve for overload Control valve for descent speed Oversized hydraulic cylinders with anti-fall valve in case of broken pipes Anti-shearing safety distance between the pantograph arms Joints with self-lubricating bushings
Request for a quoteHOVMAND A/S
Denmark
When the going gets tough, the IMPACT 200 is the most reliable and durable lifter. This is because it effortlessly copes with of up to 200 kg total weight. And with amazing stamina, too. Thanks to its exchangeable batteries, it can work 24 hours a day for you without loss of power. We have designed a range of electrical and manual tools for really heavy tasks, and you can configure these as required. You can easily move reels or drums by remote control for example, according to your choice. This not only makes your processes more fluid, it also gives you a whole new level of flexibility in terms of the efficiency of your existing production processes. In addition, you can choose the right mast height, undercarriage and platform to suit your operations.
Request for a quoteFERPLAST SNC
Italy
FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.
Request for a quoteFERPLAST SNC
Italy
PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.
Request for a quoteGSW SCHWABE AG
Germany
A stationary production aid everywhere where bigger loads have to be lifted or lowered, e.g. as loading table behind compact feed lines Stroke from 800 1600 mm Electrohydraulically driven lifting and lowering, controlled via hand sensor device (Totmann) on a 3m cable.
Request for a quoteFERPLAST SNC
Italy
The HZ series lifting platforms are lifting equipment to be installed in a fixed position and are operated by an electrohydraulic control unit. Manufactured according to the anti-accident guidelines, they consist of two lower and upper planks and a pantograph system operated by a hydraulic cylinder. TECHNICAL FEATURES: Sturdy structure Construction according to CE safety standard Top plate in smooth sheet Aluminum safety perimeter on the top deck European production hydraulic control unit, positioned externally, designed for intermittent use of 30% Pushbutton with low voltage controls Hydraulic system with overload safety valve Control valve for descent speed Over-dimensioned hydraulic cylinder with anticadut valve in case of pipe breakage Safety distance between the arms of the pantograph Self-lubricating sleeves Removable lifting hooks for transport and installation Yellow color RAL 1028 painting
Request for a quoteFERPLAST SNC
Italy
Lifting platform HY 1001 pantograph with low profile. Also included in the price is the access ramp of 1200 mm length, for the discharge and the load by pallet truck. Features: Structure in high thickness sheet steel with high thickness Construction according to European safety standards Electrohydraulic control unit positioned externally Keypad with protection IP 54 positioned on the hydraulic power pack Security perimeter aluminum on the upper platform Hydraulic power unit designed for intermittent use by 30%. Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Joints with self-lubricating bushings Lifting hooks removable for transportation and installation Mechanical lock for maintenance Painting with yellow RAL 1028 Access ramp length 1200 mm for pallet truck
Request for a quoteFERPLAST SNC
Italy
The lifting platforms HW-C series are lifting equipment to be installed in a fixed position and are driven by a hydraulic power pack. Manufactured according to the accident prevention, they consist of two platforms (upper and lower) and a pantograph system actuated by a hydraulic cylinder. The HW-C series is characterized by the perimeter protection bellows. Main Features: Very strong structure in painted steel Construction according to CE safety standards Upper platform in smooth metal sheet Perimeter protection bellows Hydraulic unit of European production, positioned internally, designed for intermittent use by 30% Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Antishearing safety distance between the arms of the pantograph Joints with self-lubricating bushings Lifting hooks removable for transportation and installation
Request for a quoteFERPLAST SNC
Italy
Lifting platform single pantograph with U or E profile (FPHU/FPHE 1000) for the insertion of the pallet. On request it is possible to make a modification to the platform transforming the profile from U to E in order to have a central support for the pallet. This variant guarantees the lifting of heavy pallets without risk of flexing. For correct operation of the platform the load must be distributed evenly regardless of the type of profile in use. Features: Structure in high thickness sheet steel Construction according to European safety standards Electrohydraulic control unit externally positioned Keypad with protection IP 54 positioned on the hydraulic power pack Security aluminium perimeter on the upper platform Hydraulic power unit designed for intermittent use by 30%. Hand control with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with fall arrest-valve in case of breakage of the pipes
Request for a quoteFERPLAST SNC
Italy
FP SPA 800-DE-1V DOUBLE PANTOGRAPH PLATFORM - ELECTRICAL FEEDING AND ELECTRO-HYDRAULIC LIFTING Double pantograph wheeled lifting platform, completely electric with motorized advancement and lifting. The platform is equipped with: - Driving tiller with feed and lift controls - Two pivoting steering wheels - Two traction wheels - Geared motor for feeding - 24 V electrohydraulic power unit - Chrome cylinder for lifting - 2 long-lasting batteries of 12V / 60Ah each - Single-phase 220 V battery charger supplied
Request for a quoteFERPLAST SNC
Italy
PLATFORM ON WHEELS 800X1600 - LOAD 500 KG The manual lifting trolley is a special model with a large and sturdy structure in sheet steel with reinforced edges. With a lifting height of 900 mm, it transports all types of goods to a comfortable working height. It is equipped with a sturdy pedal pump, which allows effortless lifting of the table.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
BATTERY LIFTER FOR BOXES AND REELS FP PS 04 E - LOAD 400 kg Lifter with manual pushing and lifting with electro-hydraulic pump, allows to lift loads (axis, bags, containers, minipallet, etc.) with maximum weight of 400 kg up to a height of mm. 1510. The elevator FP PS 04 E is compact and easy to handle. Is equipped with polyurethane wheels of large diameter for a high smoothness (two fixed and two steerable complete with brake). It is supplied with loading forks with a length of 650 mm. The battery 12 V-80 Ah. without maintenance, combined with the robust engine and control electronics with overload protection ensures safe and reliable operation. The battery charger is integrated.
Request for a quoteFERPLAST SNC
Italy
Lift height mm. From 1500 to 2000. Robust and reliable. Forklift with manual traverse and battery lifting. Practical and manageable is very useful for lifting loads up to 100 kg or 200 kg depending on the model. Depending of the optional mounted, can be used to lift boxes, handling reels or hooking products to hook "G". The lowering frame allows it to fit under the standards pallets to achieve reels or boxes positioned in the center to the pallet. Supplied with batteries and charger. Available in the following versions: BIG 100/150 capacity 100 kg Lifting height 1500 mm BIG 100/175 capacity 100 kg Lifting height 1750 mm - mast height mm. 2170 BIG 100/200 capacity 100 kg Lifting height 2000 mm BIG 200/150 capacity 200 kg Lifting height 1500 mm BIG 200/175 capacity 200 kg Lifting height 1750 mm - mast height mm. 2170 BIG 200/200 double capacity: 200 kg with lifting height 1500 mm / 100 kg with lifting height 2000 mm
Request for a quoteFERPLAST SNC
Italy
LIFT WINCH STACKER WITH AUTOMATIC CLUTCH MOD. ARG W 181 Practical and functional allows to lift loads of 180 kg up to a maximum of 2450 mm. The exclusive hand winch can lift the load with minimal effort and, through the built-in automatic clutch, you can stop to any point in the ascent lifting. The descent of the load is only possible if the operator acts on the winch and intentionally causes its gradual descent.Equipped with strands of rope fiber core, push handles horizontal system of brake pedal, aluminum and epoxy powder coating oven-dried. Painting RED - BLUE - YELLOW according to availability.
Request for a quoteHOVMAND A/S
Denmark
When it comes to handling large and heavy paper, cardboard and plastic reels, COMPACT is the right choice. The smallest battery-operated lifter on the market features a combined boom with wheel for easy lifting of rolls up to 100 kg and a rotating V-block for special reels with axle up to 60 kg. A cost-effective alternative for those who like to keep things simple. This ensures your reels are transported safely from A to B – and all the way to the packaging machine (perhaps better: further processing machine?). Our COMPACT lifter is a simple, self-explanatory lifting solution, specially developed for the printing and packaging industry. And it’s so simple: pick up the reel on the boom or the V-block, run to the machine, apply the brakes and then comfortably push the roll from the boom or V-block into the machine.
Request for a quoteFERPLAST SNC
Italy
BATTERY FORKLIFTER FPBINGO 150 N Forklift with manual traverse and lift battery. Available with platform, forks or spike reel holder. Complete with battery charger. The lifter lifting speed without charge is approximately 17 seconds (90 mm/sec.) for the total stroke up to 1500 mm. The product comes with the standard support surface but it can be equipped with other accessories by purchasing them separately.
Request for a quoteFERPLAST SNC
Italy
HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.
Request for a quoteFERPLAST SNC
Italy
INCLINABLE LIFTING PLATFORMS The tilting lifting platform BL series are specially designed to allow operators to fill or empty boxes and containers with maximum comfort, without having to perform repetitive movements harmful to health. The inclination is automatic and maximum lifting height reaches 45°, this greatly facilitates the removal of small parts at the bottom of containers. The lifting is by foot pump and the BL 15 to reach the maximum height takes only 20 pump strokes. The load floor is equipped with a robust containment drawer side.
Request for a quoteHOVMAND A/S
Denmark
When it comes to hygiene, the stainless steel lifter meets the rigorous requirements of food, cosmetics, chemical and pharmaceutical production (IP66). This is due to its elaborately electropolished surface finish that permits only minimal particle adhesion. Thanks to numerous manual and electric lifters, the E300 can be used for a wide range of applications, including handling drums, tubs and vessels up to a height of 2.35 metres. For example, it can be used as an efficient reel lifter with a boom or roller grab, as a drum tipper or for stacking crates using a fork. The E300 lifter makes it possible to grip, lift, turn and tip very heavy loads of up to 300 kg. The E300 is also equipped as standard with a removable battery unit and antistatic ESD wheels to prevent discharge.
Request for a quoteFERPLAST SNC
Italy
Lift height mm 1500/2000. Stainless steel version. Forklift with manual operation and battery-lifting, with aluminum upright to guarantee lightness and great maneuverability. The frame is made of AISI 304 stainless steel and the thermoformed ABS hood guarantees hygiene and safety in hazardous environments. Practical and handy it is very useful for lifting loads up to 100/200 kg to a height of mm. 1500 or 2000, depending on the model. Depending on the optional mounted, it can be used to lift boxes, moving coils or hook products with "GX hook". The low structure allows it to fit under standard pallets and reach reels or boxes positioned in the center of the pallet. It comes complete with two 12 V/40 Ah batteries.
Request for a quoteFERPLAST SNC
Italy
Manual winch lifter with aluminum frame, 4 models with capacities from 160 to 227 kg, max lifting from 1800 mm to 4200 mm. General features: Compact design; Made of aluminum, lightweight and durable; Access to individual ports; Forks standard steel; Non-marking rear wheels of 20 cm and double front swivelling wheels of 5 cm (only on the standard base and straddle base); Rear swivelling wheels of 12,7 cm. with lateral brakes and fixed front wheels of 10 cm (only on the counterweight base); Easy to load and unload on vehicles for transport; Safety fixing of transportation; Standard winch; Reversible winch to lift heavy loads quickly. Standard features: FPLG-4 maximum height forks at the top 1,80 m - load capacity 227 Kg. FPLG-8 maximum height forks at the top 3,06 m - load capacity 181 Kg. FPLG-10 maximum height forks at the top 3,56 m - load capacity 159 Kg. FPLG-12 maximum height forks at the top 4,20 m - load capacity 159 Kg.
Request for a quoteFERPLAST SNC
Italy
Practical and functional MINI ARG allows to lift loads of 100 kg up to a maximum of 970 mm./ 1180 mm. depending on the model. The exclusive hand winch allows to lift the load with minimum effort and through the automatic clutch incorporated may stop the ascent at any point in lifting.The descent of the load can only occur if the operator acts on the winch and intentionally causes its gradual descent. The trolley ARG load 100 Kg painted is available in: MINI ARG/V lifting height 970 mm rubber wheels MINI ARG/1V lifting height 970 mm - bidirectional rubber wheels - delivery 10 days MINI ARG/2V lift height 1180 mm - large raised rubber wheels MINI ARG/4V lifting height 970 mm - 260 mm diameter pneumatic wheels - delivery 10 days MINI ARG/4V-2 lifting height 970 mm - wheels ANTI DRILLING - delivery 10 days
Request for a quoteHOVMAND A/S
Denmark
Made of electropolished stainless steel, the INOX 200 handles loads of up to 200 kg. It was specially developed for industries with rigorous requirements in terms of cleanliness and hygiene (IP66) and is therefore frequently used in the pharmaceutical and food industries. The model can be equipped with electric or manual tools, for example to move reels, Euro stacking containers or barrels – depending on the lifting task in question. All tools for the INOX 200 are made of pure stainless steel.
Request for a quoteResults for
Lifting equipment - Import exportNumber of results
257 ProductsCountries
Company type
Category