Laser machining - Import export

Laser cutting is carried out by special machines. All of the machines have the latest technological features. A fine and successful cutting technique is applied. It also provides the expected success in PVC cutting. Because the machine is strong; it applies a fast process in thick material cutting, aluminum, galvanized cuts. In particular, laser cutting, foil-coated cutting processes give more effective results than other materials. The burn trace is minimal and minimal. Our company is successful in this regard.

Do you have individual requirements for your laser processing center that our standard laser system of the LS series cannot meet? We develop together with our customers from stand-alone systems to integration into existing lines. In doing so, system know-how meets automation and laser technology: - robot solutions - portal variants - rotary table machines - sliding table systems - scanner solutions - integrated solutions based on VARIOMODUL® or, - at your request, on standard laser machines of the LS series For further information please take a look at our homepage.

Due to their compact and flexible design, LS series laser machines guarantee an easy entry into the world of laser processing. We offer manual and automated solutions: - Palletising systems - Bar and coil feed systems - Pick-and-place systems - Robots You can realize the following laser material processing with the LS series: - laser machining for welding, clean welding, cutting, drilling, hardening, and structuring - micro processing - integration of CO2 , Nd: YAG, diode, fibre or disk-type lasers and ultra-short pulsed laser Please get furher information at Download.

WiTEC Performance is the perfect solution for the most precise and fastest machining of your sheet material! The Performance is the flagship solution of the WiTEC machine family. A machine concept based on a FEM optimized design, built using premier precision components, and equipped with linear magnet motor technology, the Performance is able to achieve the highest levels of precision and speed, up to 80m/min! Thanks to the combination of Wissner’s innovative and patented hold&press Technology and sophisticated Vacuum System, you can mill even the smallest parts all the way through the finishing cut-out! No need for any adhesive paper or foil, no need for leaving connector tabs, and no deburring or cleaning is necessary! The ready-finished parts will go directly from the machine table to the end customer!

Das Laser Cutter- und Gravur-System L-1200 bietet einzigartige Präzision und Schnittqualität bei höchsten Schnittgeschwindigkeiten, die sich je nach zu bearbeitenden Material durch individuelle Laserleistungen anpassen lassen. Alle eurolaser Cutter-Systeme sind mit Laserleistungen von 60-650 Watt erhältlich. Für Sie bedeutet das anwendungsbezogene Effizienz. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Plywood sheets are available in various thicknesses between 1 and 40 millimeters. The standard size these sheets can be found in is 1 by 2 meters, this makes our BRM Open Bed laser machine the best option with its larger size when it comes to cutting plywood sheets. Not only is the work surface larger, but it is also more flexible than that of the closed laser machines. The table can be adjusted separately from the rest of the machine. Some models come with an automatic height adjustable work table, this allows the machine to be set to the correct focal height with the touch of a button. This is very useful when you often change materials with different thicknesses when cutting and engraving. Many possibilities with plywood Many different kinds of plywood are tailored to the application of the finished product. For example, there is Construction plywood which is widely used in wood construction. The focus here is mainly on the strength of the material because

TL 8525 is a high-capacity tube laser cutting machine designed for top productivity. It handles lengths up to 8500 mm and diameters up to 250 mm round or square. The TL 8525 comes equipped with leading-edge features, including a 45-degree tilt-axis cutting head with NC-Focus, 6-position front loader, 2 kW IPG fiber laser, and a large X-axis cutting head range of 1190 mm to maximize material usage. KEY FEATURES Accommodates tube and profile lengths up to 8500 mm, diameters up to 250 mm High-performance cutting head with NC-Focus and bevel function +/- 45 degrees Magazine style 6-position automatic tube load system Leading edge detection for variable tube lengths Automatic bow detection and compensation system Automatic twist compensation system Outfeed tube support with accompanying conveyor table Siemens CNC control is PC-based with touchscreen PERFORMANCE-ENHANCING OPTIONS 4 kW fiber laser source 6100 mm outfeed extension Part evacuation conveyor Automatic weld seam detection

High performance cutting machine with excellent cutting quality. 1. High positioning accuracy - ±0.1mm 2. Bridge structure - High strength, long life 3. Precision track units 4. High torque drive system 5. Vertical drive mounting bracket offer the best motion performance 6. CCD Camera 7. Laser protection glass windows to protects from laser beam exposure 8. Add-on options Available to Enhance Efficiency and Performance. 9. Cuts and Marks Various Metal Types.

The laser welding systems of the AL series can be used universally. They might be integrated into existing machine structures or used with an application device for manual welding. In combination with our NC-controlled laser machining table AL-T you get a real professional solution. We offer the required performance class for every application. You can choose between 75 and 900 W. There is a wide range of processing lenses and equipment options for these laser systems. Regardless of whether you use a simple 90 ° deflection lens, the tilt-swivel lens or our circular welding lens - the laser beam always reaches the desired point on the workpiece with pinpoint accuracy. Additional equipment options are optionally available for the AL, such as: • Micro welding device for a welding spot diameter <100 µm • Rotary axis module for cylindrical welds • automatic wire feeder • Workpiece holder • camera system •…and much more

The ALM laser system is particularly suitable for welding large molds and tools, housings and machine components - wherever mobility and maneuverability are required. With the ALM you have exactly the mobility you need for welding. No matter whether in your own workshop or on site at the customer. The laser is ready for use within a few minutes. The arm can be quickly adjusted to the area to be welded and fixed in the desired working position using electro-hydraulic brakes. The operator then has the option of welding manually using a joystick or semi-automatically. One or more axes are automatically moved at a preset speed and with the joystick curves can be driven or small corrections made.

SIGN ENGRAVING AND CUTTING MACHINE With a working area of 610x305mm exactly matching ¼ sheet size, the LS100EX is a signage engraving and laser cutter above the rest1. Be it plastic, wood, metal, or glass, any signage material can be engraved and cut. This can be your favorite sign making machine, with a large range of consumables available with up to 2 color layers, for a contrasted and professional result. INDUSTRIAL LASER FOR SERIES PRODUCTION The large dimension combined with a gantry laser technology makes the LS100 EX the perfect CO2 laser machine for small production series. Load your items or parts to be engraved, and create your engraving job with the Gravostyle software. Several industrial functions are available, such as the Matrix mode or automatic date stamp. 2 LASER SOURCES AVAILABLE The LS100 EX is available with a CO2 laser source or a Fiber laser source, to match all of your applications.

With the laser cutting and engraving machine XL-1200 for acrylics eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2,270 mm x 1,230 mm (89.3" x 48.4"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

Acrylics can be cut and engraved on a processing area of 1,800 mm x 3,200 mm (70.8" x 126.0"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The cutting machine M-1600 offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for applications like foils, acrylics, wood and textiles. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

The eurolaser laser cutting machine M-1200 for acrylic glass is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size materials. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

Various materials can be cut and engraved on a processing area of 1,800 x 3,200 mm (70.8" x 126"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

The eurolaser laser cutting machine M-1200 is a compact model with a processing area of 1,330 x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

Wood can be cut and engraved on a processing area of 1,800 x 3,200 mm (70.8" x 126"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space.

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size textiles. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size.

Textilies can be cut and engraved on a processing area of 1,800 x 3,200 mm (70.9" x 126"). This CO2 laser machine is one of the largest among the eurolaser cutter series and is available with many optional features. An ideal machine size for all applications requiring plenty of space.

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size wooden plates. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size.

The CO2 laser machine XL-3200 with a processing area of 2.270 mm x 3.200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size acrylic plates. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size.

The eurolaser laser cutting machine M-1200 for textiles is a compact model with a processing area of 1,230 x 1,330 mm (48.4" x 52.3"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off!

The eurolaser laser cutting machine M-1200 for wood is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off!

The Speedy 360 Run on Ruby® laser engraver is a laser device for engraving and cutting different materials. It is available with CO2 or fiber laser. — Processing area: 813 x 508 mm — Laser power: C02 flexx: 60 - 120 W — Laser power fiber flexx: 20 - 50 W With the Speedy laser engraver you can engrave or cut these materials: Acrylic, glass (engrave), wood, plastic, leather, metal (engrave), paper, stone (engrave), textiles, and many more. Ruby® Laser Software: The Speedy Laser comes with our intuitive Ruby® laser software. Speedy Laser product benefits — Flexx Technology (optional): CO2 and fiber laser in one device. — CeramiCore®: unique laser source for high engraving quality and long laser life. — InPack TechnologyTM: protection of laser components for high quality engraving results. — Interchangeable processing tables: different processing tables for best engraving and cutting results.

The Speedy 300 laser engraver is a laser device for engraving and cutting different materials. It is available with CO2 or fiber laser. — Processing area: 726 x 432 mm — Laser power: C02 flexx: 30 - 120 W — Laser power fiber flexx: 20 - 50 W With the Speedy laser engraver you can engrave or cut the following materials: acrylic, glass (engraving), wood, plastic, leather, metal (engraving), paper, stone (engraving), textiles and more. Ruby® laser software: The Speedy laser comes with our intuitive laser software Ruby®. Speedy laser product advantages — Flexx technology (optional): a CO2 and fiber laser in one device. — CeramiCore®: a unique laser source for high-quality engravings and a long laser service life. — InPack TechnologyTM: Protects the laser components for high-quality engraving results. — Interchangeable processing tables: a range of different processing tables for perfect engraving and cutting results

The Speedy 100 laser engraver is a laser device for engraving and cutting different materials. It is available with CO2 or fibre laser. — Processing area: 610 x 305mm — Laser power: C02 flexx: 30 - 60 W — Laser power fiber flexx: 20 - 30 W With the Speedy laser engraver you can engrave or cut the following materials: acrylic, glass (engraving), wood, plastic, leather, metal (engraving), paper, stone (engraving), textiles and more. Ruby® laser software: The Speedy laser comes with our intuitive laser software Ruby®. Speedy laser product advantages — Flexx technology (optional): a CO2 and fiber laser in one device. — CeramiCore®: a unique laser source for high-quality engravings and a long laser service life. — InPack TechnologyTM: Protects the laser components for high-quality engraving results. — Interchangeable processing tables: a range of different processing tables for perfect engraving and cutting results