Knife cut - Import export

For punching film or plastic packaging, manufactured according to customer requirements

• cutting knife principle • with cap lifter in the handle • hardened knife and transport wheel

Clean, efficient, versatile. transfluid's knife cutting method is ideal for postbending cuts. Even with extreme geometries it is possible to have perpendicular cuts with sharp edges. In both cases both chips can easily be detected in the process. Extreme requirements are also not a problem, as up to two blades can be used. An internal mandrel can also optimise the process.

TYPE OF MACHINE : ERCA, ARCIL, … The cutting plate is movable while knives are fixed. Different coatings are available. Plate dimensions can be adjusted to the number of slot needed. 1 / Fixed knife 2 / Moving plate

TYPE OF MACHINES : TIROMAT, ...

1 / Counter-knife 2 / Cutter knife 3 / Cutter knife

Machine Type ERCA, ARCIL,... Standard models are available (see. table). However we can manufacture on demand according to your technical specifications.

Various shapes are available according to transversal or longitudinal cut N°1 Perforating circular knife N°2 Circular knife for a longitudinal cut N°3 Serrated knife for a cross cutting N°4 Knife for a cross cutting

Lengthwise cutting N°12 - Dished knife N°13 - Holder N°14 - Crush perforating knife Cross cutting N°15 - Serrated knife

Unit dose pipettes precutting N°3 - Lengthwise precutting knife N°4 - Cross-cutting knife Precutting of unit dose pre-filled syringes N°5 - Precutting blade N°6 - Precutting knife for sealing machine Precutting for blister pack N°7 - Cross-cutting blade Precutting for blister packof medical reagents N°8 - Precutting knife

Different blades exist regarding the blister pack of your unit dose pipettes. N°1 Transversal precutting knife N°2 Longitudinal precutting blade N°3 Blister cutting knife

Glass wool transversal cutting N°1 - Chopper blades Glass wool lengthwise / transversalcutting N°2 - Saw with slots and scalloped teeth N°3 - Saw with slots and perforations Rock wool cutting N°4 - Saw with slots N°5 - Circular knife with carbide inserts Hemp wool cutting N°6 - Knife with cooling slots Polystyrene cutting N°7 - Single bevel knife with slotted holes Cardboard cutting of plasterboard N°8 - Toothed knife

Desinfectant wipes cutting N°9 - Set of blades Powder pouchs cutting N°10 - Serrated knife for a cross cutting N°11 - Perforating circular knife

CUTTING AFTER TUBES FILLING TYPE OF MACHINES : UNIPAC, TONAZZI, KALIX, AXIOMATIC, ... On your tube fillers lines, once tubes filled and sealed, they are cut using a knife and a counter knife. N°1 Counter knife UNIPAC N°2 Knife UNIPAC N°3 Moving blade TONAZZI N°4 Fixed knife TONAZZI N°5 AXIOMATIC cutting die

Longitudinal cut N°1 - Holder N°2 - Counter knife N°3 - Slitting knife Transversal cut N°4 - Moving plate N°5 - Fixed knives Design cut N°6 - Magnetic counter knife N°7 - Blade with TIN coating Transversal cutting tool N°8 - Block N°9 - Gear N°10 - Moving blade N°11 - Counter knife

Paper core cutting N°1 - Pneumatic knife holder N°2 - Crush knife N°3 - Perforating knife Precutting blade for rewinder machine N°4 - Precutting knife N°5 - Counter precutting knife Blades for transversal cutting machine N°6 - Log saw Ø610 N°7 - Grind wheel B64 - 3 fixation holes N°8 - Grind wheel B64 - 4 fixation holes

Food stretch film is a packaging material widely used in the food industry. It aims to preserve the freshness and hygienic conditions of food products with its flexible and transparent structure. Food stretch film prevents food from being exposed to oxygen, moisture and external factors, thus extending the shelf life of the products.

Whether cutting, sawing or perforating tooth, for all printing machines and grammages. Manufactured from conventional steel strips to high-alloy and powder metallurgical steels.

Cutting- and perforating of foil- and plastic webs

plastic handle*interchangeable blade*made from hard metal*length 185 mm

Robust and durable As a naturally renewable raw material, wood is not only one of our favourite building materials, it can also be disposed of and recycled with comparative ease. For old wood recycling, tables, kitchens, damaged railway sleepers or chipboard are recycled using singleshaft shredders. In these machines, our cutting crowns and knife holders in a very wide variety of sizes and versions have been used for many years and have proven themselves in practice day after day.

Coats cutting knife

Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice.

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.

There is virtually nothing this powerful and versatile knife can`t do. It is used for chopping, cubing, slicing and dicing vegetables, meat and other ingredients. If you cook big cuts of meat often, chef’s knife is a must have. The blade curves at the end in the German fashion, making it useful for chopping in a rocking motion, so the tip of the knife doesn’t leave the cutting board. The overall lightness of the knife together with comfortable olive wood handle will make different kitchen tasks easy and your wrist and arm will not get tired. Presentation blade size: 18 cm Unlike other kitchen tasks, cutting, chopping, slicing and dicing are still mostly done by hand. While many of us have modernised our kitchens with high-tech toasters, smoothie machines and slow cookers, possibly the most ancient device of all, the knife, remains. Felix has been making knives in Solingen, the "City of Blades", since 1790 and still today stays true to its centuries-old tradition.

Synchronized transmission and drive by gear with one belt. The change of transmission belt will be finished quickly. Compared to the type of traditional multilayer whose change and maintain need more than six hours, its maintenance is easy and maintain is simple, so it doesn’t influence production. 2.Cutter head unit: The new style cutting knife droved by servo motor, with high speed, more stable and precise, shrinks perfectively.Synchronous locating device enables the tolerable error to ±1mm.Unit cutter head plane design in China which applies to the container of D30mm—D130mm.You never need to change or debug it. Cutter head original transducer is inside the cutter head and when you take down cutter head, you do not need to correct the synchronous belt. It also has unique light touch human-machine screen, that means, auto search original location as well as safety and convenience which is ahead of other congener products. 3. Label feeding unit: Single material shelf with

secutex has developed the new “TopDrain” structure surface for lifting wet or oily components. Most of the damages at sharp or rough edges are caused by the movement of the load across the sling. In the case of loads with a “sharp edge” or with a very rough surface, a protective sleeve or fixed coating must be used to protect the textile lifting sling. If the load moves sideways, a cutting movement on the edge is the result. Similar to a knife blade, the edge can cut through the fibers of the textile sling. The new “TopDrain” surface drainage provides good adhesion of the protective sleeves and the coated lifting slings even on wet and oily materials. The liquid can drain off into the surface hollows and the load lies securely in the lifting sling. The “TopDrain” structure works like a drainage and ensures the frictional connection of the secutex coating to the load.

Small but mighty, this knife is great for precision-cutting tasks, like peeling and coring fruits, deveining shrimps, slicing garlic or scoring pastries. Many chefs consider it the second most important knife to own besides the chef’s knife. Be in control of these very specific tasks with this most versatile, multi-task knife. Light-weight and easy to hold, olive wood paring knife has a 9 cm or 12 cm long, straight cutting-edge blade. Presentation blade size: 12 cm Unlike other kitchen tasks, cutting, chopping, slicing and dicing are still mostly done by hand. While many of us have modernised our kitchens with high-tech toasters, smoothie machines and slow cookers, possibly the most ancient device of all, the knife, remains. Felix has been making knives in Solingen, the "City of Blades", since 1790 and still today stays true to its centuries-old tradition.

Small but mighty, this knife is great for precision-cutting tasks, like peeling and coring fruits, deveining shrimps, slicing garlic or scoring pastries. Many chefs consider it the second most important knife to own besides the chef’s knife. Be in control of these very specific tasks with this most versatile, multi-task knife. Light-weight and easy to hold, olive wood paring knife has a 9 cm or 12 cm long, straight cutting-edge blade. Presentation blade size: 9 cm Unlike other kitchen tasks, cutting, chopping, slicing and dicing are still mostly done by hand. While many of us have modernised our kitchens with high-tech toasters, smoothie machines and slow cookers, possibly the most ancient device of all, the knife, remains. Felix has been making knives in Solingen, the "City of Blades", since 1790 and still today stays true to its centuries-old tradition.