Results for
KEBA FASTENINGS
Germany
are self-tapping screws designed to securely mount thin sheet metal joints. Strong screw joint Circular cross section for better thread engagement Quick alignment and low installation torque for an easy and safe assembly High stripping torque Metric compatible
Request for a quoteVOLFI VOLKER FISCHER GMBH
Germany
Extra-wide spacers for paving joint widths of up to 40 mm, green joints or grass cross spacers. For stack bond, stretcher bond or as line spacers.
Request for a quoteKOREMA® GMBH & CO.KG
Germany
Each expansion joint is tailor made. Layers of material are assembled on a frame which conforms exactly to the required profile. Bellows type expansion joints incl. or without reinforcing rings/frames. Diaphragms Expansion joints for varying cross sections and transitions. Construction from round to rectangular Construction according to drawings Non-standard high temperature seals Compound movement
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Protection and Drainage Board FKD 60BU under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5Under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5 Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Drainage and Storage Board FKD 60BO under intensive roof greening in multi-layer construction and temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16Under intensive roof greening in multi-layer construction filled with Drainage Material Perl 8/16 Under temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16 Unfilled installation under intensive roof greening is possible with a substrate height of up to 400 mm in combination with Optigrün Filter Fleece FIL 300 (it is not possible for vehicles of any kind to drive over the unfilled Optigrün Drainage and Storage Board FKD 60BO) Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SPM - SOCIÉTÉ PYRÉNÉENNE DE MÉTALLURGIE
France
Drillstar Industries can provide you with the full range of cross-overs and subs, with sizes up to 20" OD : - Straight OD subs. - Cross-Overs or reduced section subs. - Bit subs. - Saver subs - Rotary subs - Pup joints - etc. All our Cross-Overs and subs are made according to API specifications (7-1 and/or 5CT) and API standard features can be added (stress relief grooves, bores for API float valves, etc.) They can be fitted with the whole range of API drill stem (REG, API, etc.) and casing threads (STC, LTC, BTC...). VAM premium threads can also be used, as well as other special connections (Hydril FJWP, etc.) Our subs are fully machined from certified AISI 4145H alloy steel. Other materials such as non-magnetic steel, inconel, monel, stainless steel, aluminium, titanium, etc. can be used.
Request for a quotePROFORM GMBH
Germany
Bars for small glass holding strips when using noise insulation glass or angled window casements edges, i.e. where bar height 10 mm or 13 mm cannot be used. Can be combined inside/outside with G25, G45 and G75 because of exactly equal widths. Simple cross joint cutting 45° in a template permits the use of quick tack bonding technology.
Request for a quotePROFORM GMBH
Germany
Trapezoid Window Bars G18 x 10, G35 x 13 Antique window bars for the architectural design of window casement systems with bevelled profile design and long lips. G 18 x 10 for smaller window units and fulfilling requirements for the protection of historical monuments. Comply with the special cutting notes for the 45° cross joint in accordance with the installation instructions. Nostalgic Window Bars G22 x 10 Nostalgic window bars for a visually appealing bar design. For appropriate window casement systems, small windows or to fulfil specifications relating to historical buildings. Bar design with long lips enables easy adhesion following cross joint cutting. Installation notes with cutting equipment. We can supply special cutters.
Request for a quotePROFORM GMBH
Germany
Bars with simple and straight contours, suitable for corresponding window casement systems. Simple 15° cross joint cut with limited visibility of the bar lips. 4 bar widths offer a wide range of combination possibilities, e.g. accentuation of lower and upper part of the window and nostalgic window bar design.
Request for a quotePROFORM GMBH
Germany
For rounded and nostalgically formed window casement systems. Visually appealing bar layout when used in combination, e.g. vertical D36 x 12, horizontal D30 x 9. In the meanwhile the product range has been extended in D36 x 9 and D48 x 9. Simple 30° cross joint cut and visible faces that appear to have the same width.
Request for a quotePOUGET
France
USE : - Lining of the rails and Track. - Switches and Crossings Jointing. ADVANTAGES : Simple, Accurate and Tough. MC-1 Track Lining Ratchet-Wheel (for Standard rails) includes : - 1 Ratchet-Wheel, 100 m. of nylon Wire retaining catch and quick Device for fastening to the Rail Flange. - 1 Line Base with Lateral Adjustment of the Nylon Cord and Device for quick Attachment to the Rail Gauge. - Total Net Weight : 5.2 Kg (This Set doesn't engage the Track Gauge). PB-1 Bill Handles - Steel Body Ø 140 mm with Central Handle - Hardened Steel Toe-Piece Ø 12 mm in contact with the rail Flange - Nylon Cord 10/10th x 100 m rolled on Bill Handle Body. - Unit Net Weight : 670 gr. The PB-1 includes 2 Bill Handles . OPTIONS : Device for Tram Tracks (Grooved Rails) - Ref. MC-2
Request for a quoteSAMTRUCK
Turkey
Shaft Bearings, Joint Cross, Strap, Nuts, Seal Rings etc. We have all Trucks spare parts. Just contack us by mail or whatsapp number: export@samtruckt.com.tr Whatsapp: +90 535 830 18 19 Exports sales: Sami Caner
Request for a quoteResults for
Joint crosses - Import exportNumber of results
13 ProductsCountries
Company type