Results for
SEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS COVER is an indoor coating that can be Airless sprayed. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivatives, preservation agent and various additives. The resulting paste is white and its consistency is adapted to its airless application. ACCEPTED SUBSTRATES • Fair-faced concretes. • Plasters boards. • Old droplets • Porous concrete PACK SIZE 25 kg. Plastic bags and tubs. SUITABLE SURFACES The SEMIN AIRLESS GARNISSANT layer can be applied with the help of an acrylic or gloss paint. TECHNICAL CHARACTERISTICS • Dry extract : 72% • Density : 1;88 • COV : < 1g/ litre APPLICATION SEMIN AIRLESS covering layer is sprayed in two steps : the first must be smooth with the help of a 60 cm blade, after drying the second one must be smoothed with the blade. The product must be sprayed at about 80 cm from the support. TIP : Lift filters before spraying.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.
Request for a quoteSEMIN
France
TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
Our focus lies on heat-sealable adhesion promoters for thermoplastics, thermosets and vulcanization adhesion promoters for elastomers. However we also provide functional coatings with special properties such as electrical conductivity, abrasion resistance, sliding properties, temperature resistance and much more.
Request for a quoteVATROSTALAC D.O.O.
Croatia
Keraplastol is installed in various heat aggregates such as furnaces of steam boilers, blacksmith furnaces, furnaces with aggressive slag, and other types of metallurgical furnaces. It can withstand a temperature of around 1600 ° C. Keraplastol is also used for lining induction furnaces for melting aluminum and its alloys and for melting zinc.
Request for a quoteSCHOCK GROUP
Germany
With SCHOCK Powder Coating, we achieve high-performance and visually appealing product surfaces with long-term corrosion protection and individual color customization. SCHOCK Powder Coating operates with state-of-the-art technology, fast color change cycles, and sustainable, energy-efficient production. Our coating facility is located at the central logistics hub of the SCHOCK Group in DE-72296 Schopfloch. This ensures our customers receive punctual, reliable, and cost-effective deliveries. Electrostatic powder coating relies on the attraction between parts with opposite electrical charges. When high requirements for impact resistance and weather resistance are needed, powder coating is indispensable. These properties have led industries such as equipment manufacturing, machinery manufacturing, medical technology, heating and ventilation technology, household appliances, store fixtures and furniture manufacturing, as well as the automotive industry to largely transition from wet paint
Request for a quoteHESKINS LTD
United Kingdom
Heskins squeegee is a useful tool in the application of reflective tape. The squeegee helps to remove air bubbles and prevent tearing on the application. A squeegee is a reusable tool made from ABS resin that is strong enough to not break, but flexible enough to not cause any damage to the material. Heskins squeegee is available in blue. For more information, or to place an order, you can contact us by phone, Live Chat or the contact us form.
Request for a quoteHESKINS LTD
United Kingdom
Heskins seam rollers are available to help increase the durability of your anti-slip tape or floor marking tape application. By using the seam roller once you have applied your anti-slip or floor marking tape, by applying pressure to the surface with the seam roller, this increases the bond between the adhesive and floor surface. This results in a quickly cured surface with a durable application. The seam roller is made from a semi-ridged foam, that will allow pressure to be applied without damaging the surface. The handle is made from plastic, coated in rubber to enhance grip and comfort.
Request for a quoteHESKINS LTD
United Kingdom
Heskins rubber mallet is intended for use on our conformable Safety Grip. Used to help conformable to conform to any irregular surface it is applied to, the mallet head is rubber to prevent damage to the surface, but increase the service life of conformable anti-slip tape. Heskins provide rubber mallets with a wooden handle to reduce vibration and increase comfort. It is varnished to prevent splintering. The mallets weight is 525 grams. You can view the rubber mallets use in the video under the video tab.
Request for a quoteHESKINS LTD
United Kingdom
Heskins H3510 keying agent is an advance in adhesive technology, in the battle against low energy surfaces. All self-adhesive bases are liquid-based and as such, they need to ‘wet out’, which means they need friction to bond with a surface. The less friction, or energy, the less efficient the bond will be. H3510 keying agent, applied in small amounts, will increase the amount of energy in a surface and help create that efficient and durable bond. H3510 is only required for a very small amount of surfaces, normally these are PUR, some PPs etc, these surfaces typically exhibit low surface energy levels. For further clarification as to when H3510 may help please speak with our technical sales team.
Request for a quoteHESKINS LTD
United Kingdom
Heskins H3502 edge fix sealer greatly helps to prevent the lifting of the Safety-Grip antislip in high traffic areas. One simply applies the edge fix down the side of the tape using the narrow nozzle built into the tube, it helps to secure the product and extend its life. A 140ml tube will cover approximately 35 linear metres, for larger quantities, we can offer an automated pressure pot system. A pressure pot system is a method of applying the edge fix sealer with rapid production line speed, all it requires is a compressed airline to be in place, Heskins will then supply the pot chamber and the applicator, the pressure pot system enables huge material cost savings compared to 140ml tubes.
Request for a quoteHESKINS LTD
United Kingdom
To effectively clean surfaces before our grip tape is applied we recommend Heskins H3508 IPA cleaner, it helps to remove contaminants, it does not leave behind a greasy residue unlike methylated spirits, petrol etc. Isopropyl alcohol (IPA) as an alcohol-based cleaner is fast drying, so will leave your application surface clean and dry very quickly. Available in 1-litre bottles, this provides substantial cleaning as only a very small amount is required.
Request for a quoteHESKINS LTD
United Kingdom
Heskins surface primer is ideal for sealing porous surfaces such as wood, concrete or stone prior to application of our anti-slip tape to prevent moisture degrading the adhesive; it also greatly helps to create an extra bond on other surfaces. The normal tin size is 1 litre which covers approximately 5m², it is simply brushed into place. For larger applications, we can also offer 5L and 25L tins which offer substantial cost savings.
Request for a quoteHGGDHDH
Qatar
FLOORING ACCESSORIES ACCORDION-FOLDED SHEET ACCORDION-FOLDED SHEET PUZZLE ADHESIVE TAPE SOLID AQUA STOP LVT FLOORING UNDERLAY ROLL SHEET SHEET XXL UNDERLAY FOR HEATED FLOORS
Request for a quoteOSUPP ASPHALT & BUILDING EQUIPMENTS AND CHEMICALS
Turkey
POLYURETHANE TRANSPARENT TILE INSULATION DOUBLE COMPONENT 17+3 KG IT PROVIDES PERFECT WATER ISOLATION. IT IS HIGHLY ECONOMIC COMPARED TO THE MARKET. WITH ITS TRANSPARENT DESIGN, IT DOESN'T BAD AESTHETIC, IT PROVIDES A RENOVATED SURFACE. MADE WITH THE BEST RESIN BRANDS. EASY TO APPLY TO THE SURFACE, DRY QUICKLY. THE USAGE AREA IS EXTREMELY WIDE. It is a two-component, self-leveling, solvent-based floor coating product based on POLYURETHANE RESIN. After drying, it forms a highly elastic and unique layer. It is not affected by UV and external weather conditions. It does not turn yellow, fade, break or lift over time. It shows high resistance to abrasion. It is not affected by human and vehicle traffic. It is resistant to chemicals and acids. Its adherence (adhesion) is in the perfect position. usage areas As a smooth surface coating on all industrial floors.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EAB ASSOCIATES
United Kingdom
EABASSOC Elastotherm AC keeps buildings cool on hot, sunny days by reflecting sunlight and emitting heat. It provides protection from UV, weathering and pollution. It is waterproof whilst allowing the building breathe and it also has anti-carbonation properties. With a lifetime of over 20 years it is a durable finish that will last.
Request for a quoteGEOMEMBRAN PROTECH
Turkey
KULLANIM ALANLARI Katı atık depolama sahaları Sıvı atık toplama ve arıtma istasyonları Altın ve diğer madenlerin sızıntı su toplama havuzları Petrol tankı ve petrol sahaları izolasyonu Çökeltme havuzları Gübre çukurları Eğer istenirse bina temel bohçalama işleri Göletler Tüneller Sulama kanalları Biyoenerji üretim tesisleri ÜRÜN ÖZELLİKLERİ Kimyasal maddelere karşı yüksek dirençlidir. UV dayanımlıdır. Pürüzlü yüzey sayesinde sürtünme payı azalır. Organik ve inorganik çözeltilere yüksek direnç gösterir. Çatlamalara karşı son derece dayanıklıdır. Doğal koşullara dayanıklıdır. Delinme ve çatlamalara dayanıklıdır. Geçirgenliği düşüktür. Çekme mukavemeti yüksektir.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER STANDARD 160 is a good ratio of price and quality. The goods are in special demand among large construction companies in Ukraine. The fiberglass mesh protects the facades from cracks and destruction – it reliably strengthens the surface during external plastering, as well as in facade insulation systems in houses with increased number of storeys. The STANDARD series is accompanied by European and Ukrainian certificates of conformity. For the national market, the product has a certificate issued by UkrSEPRO, mass per unit area of the mesh 160 g/m2 meets the State Building Standards of Ukraine (DBN). The material has tensile strength (≥30 / ≥48 N/mm), is resistant to acids, alkalis, temperature and moisture. The fiberglass mesh is ease to use. The STANDARD series reliably reinforces the facade and is able to maintain its integrity for 20 years.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER ECONOMIC 160 is quality at an affordable price. The product is produced for the Ukrainian construction market and is an indispensable element for strengthening the surface during external plastering, as well as in facade insulation systems of medium and low buildings. The ECONOMIC series is accompanied by Ukrainian certificates of conformity issued by UkrSEPRO, international ISO 9001:2015 and Quality Passports. The material has tensile strength (≥22 / ≥36 N/mm), is resistant to acids, alkalis, temperature and moisture. The fiberglass mesh is ease to use. The ECONOMIC series reliably reinforces the facade and is able to maintain its integrity for 15 years.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER STANDARD is a good ratio of price and quality. The goods are in special demand among large construction companies in Ukraine. The fiberglass mesh protects the facades from cracks and destruction – it reliably strengthens the surface during external plastering, as well as in facade insulation systems in houses with increased number of storeys. The STANDARD series is accompanied by European and Ukrainian certificates of conformity. For the national market, the product has a certificate issued by UkrSEPRO, mass per unit area of the mesh 140 g/m2 meets the State Building Standards of Ukraine (DBN). The material has tensile strength (≥30 / ≥44 N/mm), is resistant to acids, alkalis, temperature and moisture. The fiberglass mesh is ease to use. The STANDARD series reliably reinforces the facade and is able to maintain its integrity for 20 years.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER ECONOMIC 140 is quality at an affordable price. The product is produced for the Ukrainian construction market and is an indispensable element for strengthening the surface during external plastering, as well as in facade insulation systems of medium and low buildings. The ECONOMIC series is accompanied by Ukrainian certificates of conformity issued by UkrSEPRO, international ISO 9001:2015 and Quality Passports. The material has tensile strength (≥22 / ≥34 N/mm), is resistant to acids, alkalis, temperature and moisture. The fiberglass mesh is ease to use. The ECONOMIC series reliably reinforces the facade and is able to maintain its integrity for 15 years.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER PROFESSIONAL 145 is manufactured as a premium export product. It is used at External Thermal Insulation Composite Systems (ETICS). The fiberglass mesh professionally reinforces and powerfully fixes the surface even in the case of thick plastering on large areas of tall buildings and skyscrapers. Thanks to the smaller mesh size (4×5 mm), the fiberglass mesh perfectly adheres to the wall with a large number of small inclusions. The mesh has increased mechanical tensile strength (≥32 / ≥44 N/mm), resistance to acids, alkalis, temperature and moisture. The characteristics of fiberglass mesh from PROFESSIONAL series are confirmed by European certificates (ETA, FPC). This product complies with the requirements of ETAG004 and is СE marked. The fiberglass mesh is characterized by superelasticity and practicality. It is convenient to use. The PROFESSIONAL series reliably reinforces the facade and is able to maintain its integrity for 25 years.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER PROFESSIONAL 165 is manufactured as a premium export product. It is used at External Thermal Insulation Composite Systems (ETICS). The fiberglass mesh professionally reinforces and powerfully fixes the surface even in the case of thick plastering on large areas of tall buildings and skyscrapers. Thanks to the smaller mesh size (4×5 mm), the fiberglass mesh perfectly adheres to the wall with a large number of small inclusions. The mesh has increased mechanical tensile strength (≥34 / ≥58 N/mm), resistance to acids, alkalis, temperature and moisture. The characteristics of fiberglass mesh from PROFESSIONAL series are confirmed by European certificates (ETA, FPC). This product complies with the requirements of ETAG004 and is СE marked. The fiberglass mesh is characterized by superelasticity and practicality. It is convenient to use. The PROFESSIONAL series reliably reinforces the facade and is able to maintain its integrity for 25 years.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
mesh for plaster, which makes the facade durable
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER ECONOMIC is an essential element for strengthening the surface during external plastering works, as well as in External Thermal Insulation Composite Systems (ETICS). Its main purpose is to protect the facade from cracks and destruction.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER STANDARD is an essential element for strengthening the surface during external plastering works, as well as in External Thermal Insulation Composite Systems (ETICS). Its main purpose is reinforcement of plaster layer, protection of the facade from cracks and destruction.
Request for a quoteTRADE HOUSE LATYMER LIMITED COMPANY
Ukraine
Fiberglass mesh LATYMER PROFESSIONAL is an essential element for strengthening the surface during external plastering works, as well as in External Thermal Insulation Composite Systems (ETICS). Its main purpose is reinforcement of plaster layer, protection of the facade from cracks and destruction. The PROFESSIONAL line is a certified export product!
Request for a quoteResults for
Insulating coatings - Import exportNumber of results
65 ProductsCountries
Company type
Category