Installation device - Import export

Many devices and machines are still moved by compressed air. The necessary hoses are professionally installed by us.

Copier Machinery manufactures compact, versatile, and easy to install modular concept clamping devices. They clamp the workpiece concentric with high precision and high repeatability. The clamping process is faster and with constant pressure with Copier’s clamping devices. Special jaw sets are used depending on the workpiece diameter, size, and shape to assure proper clamping of the workpiece. The clamping devices distinguish itself in outstanding reliability and are designed for the roughest production procedures. Copier’s clamping devices are easy to integrate into manufacturing lines and are available in manual, pneumatic, and hydraulic versions. Diameters vary from 5 mm up to 410 mm (0.2" – 16").

The housing of the 2008A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing of the 2004A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 4 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing of the 2003A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing of the 2008Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing of the 2004Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 4 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The complete floor box 2004B is made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be fitted with various floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 4 installation devices. The sockets are VDE certified. Further equipment variants on request.

The housing of the 2003Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing, the lid and the frame of the floor box 2003B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 3 installation devices. The sockets are VDE certified. Further equipment variants on request.

The housing, the lid and the frame of the floor box 2008B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 8 installation devices. The sockets are VDE certified. Further equipment variants on request.

CJS 25 HI is an electronic dosing device with load cells for semi-automatic filling of bags with max weight 25 kg. Hopper capacity 300 l, bags weight 2-25 kg. The machine is suitable for the automatic dosage of granular products with a good flowability. The dispenser is mainly formed by a welded and painted tubular steel, stainless steel, loading hopper with pneumatic closing, fast discharge channel, slow discharge channel with vibrator to achieve the exact weight, weighing hopper installed on load cells, pneumatic device for locking the empty bag, PLC operator interface and user-friendly keyboard. The dispenser can be combined with a motorized conveyor for automatic loading of the product and to a free or motorized conveyor for unloading the full bag, it can also be combinated with an automatic packaging machine. All parts in contact with the product are made of stainless steel. Ideal for packaging of pellets, granulated foods, dried pasta (short), cereals, coffee, nuts, sugar, etc.

Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

Body tempered. Ball hardened (50 - 55 HRC). Note: Self-aligning pads serve as stops, supports and thrust pads in fixture construction. They can also be installed in existing clamping devices, e.g. arness clamps. Ball is secured against rotation. Drawing reference: Form C: male thread, smooth flattened ball Form F: male thread, serrated flattened ball

IT’S QUITE SIMPLE. PLUS MORE. QUBE+For insulation drying, a comparable set of stacked MultiQubes can simply be replaced with one device – the Qube+. It achieves up to 20 % more area output while being 50 % lighter and 50 % smaller than the tower. Therefore, the transport from the service vehicle to the damage site can be effected 100 % quicker. A multi-device installation with complex hose connections can be omitted without replacement. Just set it up, plug it in, switch it on – all done! No more equipment technology is needed, the Qube+ comes ready for connection with all integrated parts: A powerful VX 5 turbine insulation dryer, a water separator, a 4-stage filter system and an efficient silencer – ultra-compact, united in a robust, stackable aluminium construction, offering clearly more advantages and at the same time causing considerably less costs than multi-device solutions.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

Areas of Usage: This cable type is used in automation panel installation and internal installations of electrical devices.

The IPC9000 is an easy-to-install box PC for installation in control cabinets. The box PC series is the ideal solution for demanding industrial applications. Installation of the IPC9000 is quick and easy. The device is installed by hanging it on the din rail in the control cabinet. Despite the fanless cooling concept, the use of powerful processors is possible. With the additional HDBaseT transmitter module, the IPC9000 can be installed in the control cabinet and connected to a monitor such as the OPD or MMD series up to 100 metres. For quick servicing, users can access the flash SSD or CMOS battery via the easily accessible service flap.

PGS is a locking device for pipes made of polycarbonate or polypropylene. It is designed to seal cap nuts to prevent their twisting and disconnection of pipes, as well as the removal of gas meters and installation of bridge cables for bypass devices for the purpose of stealing gas. The pipe locking device consists of two semicircular-shaped parts with additional holes for the sealing rope. To install the pipe locking device, it is necessary to connect both parts on the mounting nut, put the sealing rope into the special holes on the sides of PGS, and install the seal (rotary or latch one). The seal should be placed as close as possible to the locking device. The tamper-evident seal and rope will prevent intruders from keeping the fact of removal of the seal and the locking device from the nut unnoticed. When an attempt is made to perform certain actions with the aim to steal gas or water, visible signs appear on the seal, which is evidence