Industrial ventilation - Import export

ADIABATIC COOL BOX PREMIUM adiabatic boxes to cool and add moisture to an air flow Adiabatic modules increase the relative humidity of the environment and in turn reduce the air temperature, they are very valuable and efficient systems in UTAS (air treatment units) providing fresh and humid air without the contribution of external energy. The cooling process is based on the evaporation of water that removes energy from the air, yielding sensible heat and cooling the environment. This phenomenon is known as evaporative cooling and its use is common in industrial premises where conventional air conditioning systems are not economically viable, they are systems with very low energy consumption and therefore very economical cold production

DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.

LUX ROOF AXIAL FAN is designed to extract large volumes of air in roof installations, without long ducts. For instance: ventilation of industrial buildings (factories, warehouses etc.), stock farms

EFKC filtered shelter fans are used to supply fresh air. It can be used in two different positions thanks to the by-pass cell. Normally, the air is sent indoors only by passing through the G4 Filter. When we want the air to be cleaned, it is passed through the G4 cassette filter, active carbon cassette filter and M6 cassette filter, which is more sensitive than the coarse filter, and sent indoors. By-pass air dams are made with a sliding system.

Air Handling Unit Production with 800 - 100,000 m3/h flow rate. 20 different models and a wide selection. Ability to be disassembled thanks to the modular system Easy pointing and mounting Tolerant values and maximum efficiency in the selection of fon, heater, cooler, filters, dompers, electric motor, heat recovery device and muffler.

USAGE AREAS -It is used in the heating industry for burning solid and liquid fuels in boilers and providing secondary air in a controlled manner. -In the ventilation of closed environments -In industrial machinery belonging to the jewelery sector -in the textile industry -In mines and mushroom farms -In plastic injection machines -In the combustion air supply of gas, diesel burners -In humid and humid environments -In the greenhouse industry -In chicken coops -Used in many areas of the manufacturing industry

tubolars ,roof top & wall types

Fans in different sizes, sucking or blowing from SPAL in the 12V range. We also offer 24V, 230V and 400V fans.

Our synthetic 3Vcell excels in its technical performance and is tested according to various standards (EN779, ISO16890, Ahsrae 52.2). The Vcells are widely used in air conditioning and ventilation industry and process filtration thus an excellent choice for tough applications. IREMA 3Vcells feature a highly improved filter lifetime and energy efficiency.

Merbenit HS60 is a high modulus, elastic adhesive with high strength. It adheres to a wide range of materials. Merbenit HS60 has been approved for use in the food industry and for ventilation and airconditioning systems. The product is permanently elastic from 40 °C to +90 °C and possesses high mechanical strength. It is furthermore characterised by its very good sealing properties.

We provide ventilation with our own production of snail fans using polypropylene material. 2) DETAILS General Features: We provide ventilation with our own production snail fans using polypropylene material. Technical Specifications: Areas of Use:

Introducing the MPR Synthetic Media Filter – a high-performance solution for diverse air filtration needs. Crafted with a molded plastic frame and synthetic media, it achieves efficiency levels from G4 to M6. Ideal for automotive, gas turbines, and general ventilation in offices, industrial, food processing, and labs. Boasting a low initial pressure drop, high dust-holding capacity, and a rigid self-supporting design, it ensures durability and energy efficiency. Plus, it's incinerable, aligning with eco-friendly practices. Upgrade to MPR for reliable, efficient filtration in various applications.

PVC rubber sound barrier is a material used to provide sound and heat insulation. This sound insulation barrier is made of PVC rubber material, which is high temperature resistance and corrosion resistant. PVC rubber insulation barrier is often used in building insulation. Applied to walls, ceilings or floors, it can reduce outside noise and cold. It can also be used in ventilation systems and industrial applications.

Felt pvc rubber barrier is a material used to provide sound and heat insulation. This sound insulation barrier is made of PVC rubber material, which is high temperature resistance and corrosion resistant. PVC rubber insulation barrier is generally used in building construction acoustic insulation. It can reduce the noise and cold outside by applying to common walls, under parquet, under screed or on the ceiling. It can also be used in ventilation systems and industrial applications

Orgeco Ltd. specializes in the production of protective covers and guards for fans, offering a comprehensive range of solutions tailored to meet our customers' needs. Our expertise lies in crafting covers made from wires, as well as combinations with sheet metal, ensuring robust protection for various fan applications. We pride ourselves on our ability to deliver customized solutions, working closely with our customers to fulfill their specific requirements. With a dedicated focus on quality and innovation, we currently offer over 200 different shapes of protective covers, with sizes reaching up to 2000mm. Whether it's for industrial, commercial, or residential use, our protective covers are designed to enhance safety and prolong the lifespan of fans, providing peace of mind to our customers across diverse industries. At Orgeco, we are committed to excellence in both product quality and customer service, striving to exceed expectations with every project we undertake.

• Very slim, light-weight construction for shirt or coat pocket, with clip • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With ultra-bright LED torch in the clip • The twist mechanism allows four different profiles to be activated. • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • The twist mechanism allows eight different profiles to be activated. • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Particularly easy-to-handle version • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Plastic adapter with 1/4" bit-holder and retaining chain, approx. 20 cm • Bit (1/4") made from high-quality tool steel and specially hardened • Made of zinc casting (GD-Zn)

• For almost all common closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, public services e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • With strong chain and snap hook • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows eight different profiles to be activated. • Made of zinc casting (GD-Zn)

• Very slim, light-weight construction for shirt or coat pocket, with clip • For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows three different profiles to be activated. • With ultra-bright LED torch in the clip • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations, for venting heating systems and many more • Universal key for almost all common switch cabinets & closures • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

Ceiling fans for the recovery of stratified heat in the ceiling Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30% Its use can be commercial and / or industrial and its installation can be on ceilings from 4m to 9m in height. The fans can be mounted individually or in groups with their corresponding speed regulator.

3m diameter ceiling fan with remote control and reversible MEGA AXIAL 3000 BRUSHLESS ceiling fans can be used to recover the stratified heat on the ceiling during winter and ventilate in summer, using the fan in winter allows us energy savings of up to 30%. Its use can be commercial and / or industrial and its installation can be in ceilings from 4m to 10m in height. The fans can be mounted individually with their remote control.

Ceiling fans to cool in summer and save in winter DVW ceiling fans allow them to be used to ventilate in the summer and recover the stratified heat on the ceiling in winter, using the fan in winter allows us to save energy of up to 30%. Its use can be at a domestic, commercial and / or industrial level and its installation can be on ceilings from 2.3m to 10m high. The fans can be individually assembled with their corresponding speed regulator or up to 10 units can be grouped using our model RV10 electrical panel with regulator.

VIS MANN industrial air curtains are the perfect solution to prevent cold air in winter and hot air in summer. In addition, they provide an invisible barrier that prevents insects from entering the premises. VIS MANN A - Air only curtains VIS MANN E - Air curtains with electric resistances VIS MANN BAR - Air curtains with water coil

High flow industrial roof extractor for the extraction of stale air HELIX BOX MANN industrial roof extractors have an extraction capacity from 21,000 m3/ h to 39,800 m3 / h and are the perfect solution for the extraction of stale air in industrial buildings, warehouses, farms, greenhouses, etc. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - External structure made of galvanized steel. - Overpressure shutter made of galvanized steel. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Roof supports. - Air inlet with protection grid. - Anti rain visor.

High flow wall fans for extraction and/or ventilation This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure and overpressure slats in galvanized steel to avoid premature corrosion. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Side inserts for easy transport.