Industrial steam boiler - Import export

Thanks to large contact surface of water with smoke pipes, high operational safety and longer boiler life are guaranteed. The small water volume provides a better inside circulation and safe heat transfer with faster steam generation time. Increased strength and flexibility with corrugated furnace that is manufacturing by Eralp in 900°C degrees. In 3-pass Shell boiler design, the heat load of furnace is less than 1,2 MW/m. The result of this design is an ideal combustion with less NOx emissions, thus it causes lower fuel consumption. Further gains in efficiency can be obtained by using economizer for feeding water by preheating and air-heater for combustion air heating. The energy of flue gas can be recovered and the efficiency of boiler system is increased 5-8%. According to pressure of boiler, efficency increase up to %91. Eralp manufactured the highest efficent boiler (totally efficiency=%98,4) with two economisers which efficency tested and approved by Notify Body.

They are high-quality steam generating equipment used in all industrial plants to obtain steam required for processing. Steam boilers with flame smoke pipes can be produced as flat ashtrays and hot ashtrays. Solid, Liquid and Gas fuels are used as fuel type. Eralp Makina Kazan In 2005, it is proud to be the most productive employee of Turkey with double economy working with natural gas (total system efficiency = 98,4%). Yield tests of our product produced by Yildiz Technical University and ISKAV Foundation.

We manufacture a full range of steam boiler water treatment products including traditional oxygen scavengers, dispersants, alkalinity builders, condensate line corrosion inhibitors and antifoams. A full range of polyamine (film forming amine) all in one steam boiler treatment products including an NSF approved incidental food contact product are also available.

10 - 130 HP STEAM BOILERS

The construction of a boiler involves a diverse range of materials and components, broadly categorized into boiler steels, structural steels, and bought-outs (BOs). These materials are chosen based on factors like weldability, strength, and compliance with safety standards to ensure integrity and reliability.

The construction of a boiler involves a diverse range of materials and components, broadly categorized into boiler steels, structural steels, and bought-outs (BOs). These materials are chosen based on factors like weldability, strength, and compliance with safety standards to ensure integrity and reliability.

With impressively low emissions and its ability to be converted for biofuels or hydrogen, the UL-S is designed to be future-proof. — Very high efficiency for low running costs and emissions — Complete system with customer-specific equipment and future-proof technology — Extremely well proven design “Made in Germany”, highly durable and easy to maintain — Consistent steam quality for reliable supply — Custom designs available for heat recovery boilers, hybrid or superheated steam — Smart boiler control and seamless system integration with digital assistants

— For the convenient operation of steam boilers up to 4,000 kg/h of steam — Appealing price-performance ratio for steam boilers up to 4,000 kg/h of steam — Colour touch display for easy operation and clear visualisation of operating status — Flexible installation and small space requirement: installed on the boiler at the factory or loose control cabinet for wall mounting — Power electronics for fuel supply, feed water pump, blow-down and desalting — Optional: fully automated and conductivity-controlled blow-down and desalting

The steam boiler CSBs low emissions already comply with future requirements of the MCP Directive (EU) 2015/2193. — Large output range from 300 to 23,600 kg/h for pressures ranging between 0.5 and 16 bar — High efficiency thanks to the integrated economiser and helical heat exchanger pipes — Versatile design for use with different fuel types and as a multi-fuel firing unit (oil, natural gas, bio gas, up to 20 % hydrogen) — Compliant with even strict emission levels when used in combination with our burners and controls — Telescopic reversing chamber makes cleaning, maintenance and inspection simple — Easy to operate with CSC boiler control (up to 4,000 kg/h) and boiler control

— Three-pass boiler for a small to medium steam demand of 200 to 2,000 kg/h at up to 16 bar — Lower space requirement for easy installation — High level of efficiency due to the integrated economizer — Versatile design for use with different fuel types and as a multi-fuel firing unit — Intuitive touchscreen operation and PLC control — Easy wiring on site thanks to plug-in connections

Two independent firing units and flue gas paths offer very high flexibility in the ZFR thanks to a doubled modulation range. — Very high efficiency across the entire power range — Reliable solution for highly fluctuating steam demand — Project-specific equipment and optional components, for example superheated steam generation — Future-proof with options for low-NOx and CO2-neutral operation — Smart boiler control and seamless system integration — Stable supply and durable design Made in Germany

— Environmentally friendly generation of steam from available waste heat — The perfect addition to energy concepts involving combined heat and power generation — High efficiency through efficient tubular heat exchanger and thermal insulation — Additional efficiency gain thanks to optional integrated economiser — Matched, modular system for easy planning and fast installation

Steam is a pressure vessel manufactured to store excess steam or waste vapors out of the operation of aquaria and to be used again when necessary. They are mainly used in gas concrete installations especially for the purpose of recovering the waste steam from the process. There are water and vapor phase zones in the steam chamber. The volume is 4/3 water phase. Steam The steam is stored in the battery in the hot water phase by injecting the steam into the water by means of the diffusers located below the water level and dissolving it in the water. When the steam is needed, the pressure of the hot water is lowered and the steam produced by the resulting phase change is transferred to the process to be used again. Using a steam bath; Up to 25% energy saving is achieved. They can both discharge steam and discharge at the same time. Suspended solid materials which are dragged together with the steam collapse under the liquid and the bluff is removed from the environment and the steam is

Steam boilers with water pipes are boilers in which the water circulates and evaporates in the pipe. This high-capacity, high-capacity, high-capacity steam boiler. The combustion chamber is surrounded by a pipe-pipe-pipe joint. As a fuel in water pipe steam boilers; They use solid fuel, liquid fuel and gas fuel. n terms of safety, the water is more secure due to circulation in the pipes. Because of their lower water volumes, they are boilers that enter the regime more quickly.

Bundles are used for generating superheated, saturated steam and hot water to meet the requirment of process by utilising waste heat in power plants. We manufacture bundles according to ASME and EN standard with high frequency welded fintubes which is produced by Eralp. *We are manufacturing Solid and Serrated Type. *We can weld fin material thickness between 0,8 mm - 2 mm for high frequency welded spiral finning tubes. *It is possible to weld fin thickness less than 0,8 mm but it is not recommended. *Pitch distance is determined according to pipe diameter and thermodynamic calculation. We are able to manufacture fintubes pitch in the range of 3,5 - 20 mm.

1 ton/h to 18 ton/h Industrial Fire tube Steam Boiler, generating superheated or saturated steam, fired Gas, Liquid and/or Solid fuels, turnkey project flexible solutions as per customer demand.

We are boiler brokers for all industrial steam boilers, hot water boilers and thermal fluid heaters - new, reconditioned or for hire. You tell us what you want and we arrange for appropriate suppliers to quote you direct, at no charge to yourselves.

— For the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Fast and easy assembly, requires just a small number of connections before it can be used Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For recovering heat from flash steam from thermal water treatment — Heat recovery and thus efficiency improvement — Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For maintaining constant pressure — Preassembled for fast installation — Increased operating reliability — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For intelligent control of multi-boiler systems and individual boiler systems — Easy connection to higher-level visualisation and control systems — Integrated monitoring and protection functions to prevent faulty operation — Extensive storage of operating parameters and operating signals — Secure remote access via MEC Remote — Intuitive operation with graphical symbols and state-of-the-art touchscreen displays

— Fully automatic softening of the fresh water prevents the formation of limescale — Reliably soft feed water for preventing calcification of the boiler surfaces — Ensures efficient heat transfer, high efficiency and long service life of the boiler — High level of operational reliability and integration into the boiler control system — Needs-oriented automatic operation possible for unsupervised operation, even with fluctuating raw water hardness — Ideal in combination with the fully automatic water analysis device

The water analyzer measures residual oxygen concentration, pH values and conductivities of the boiler feed water and pH values of the boiler water. — For the fully-automatic measurement and monitoring of the boiler water quality — Increase in operating safety thanks to continuous monitoring of the water values — Automated monitoring with constant measurement of the pH value, oxygen content and conductivity — Savings on chemicals thanks to needs-based dosing of additives — Increased system efficiency through reduced desalting losses and saving of exhaust vapour energy — A water analysis device can monitor up to three boilers at a time and be integrated into plant control systems with control technology

— For the reliable fuel supply with oil — Preassembled for fast installation — Reliable recording of oil throughput — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— Save up to 1.8% in fuel costs through a higher level of waste heat utilisation — Easy retrofitting to older systems thanks to a small space requirement and simple piping — Matched control for safe operation of the boiler and components — Quick amortisation, even on systems with few operating hours — Ready for operation with just a few connections — Simple commissioning, operation and maintenance

— For distributing the steam mass flow to the relevant consumers — Reduction in network loss due to centralised distribution in systems with complex consumer structures — Savings thanks to centralised operation and maintenance Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the prewarming of viscous fuels — Suitable for all Bosch boiler systems with oil burner and ring mains supply — Increased operating reliability — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— Blow-down, expansion and cooling module for cooling blow-down water to the permissible temperature — Fast and easy assembly, requires just a small number of connections before the Blow-down, expansion and cooling module can be used — Rigorous compliance with official requirements thanks to automatic operation

— For increased system efficiency and reduced fuel consumption of up to 2% — Prewarming of the combustion air takes over a small portion of the thermal output of the burner — Lower investment costs in comparison with conventional solutions, low amortisation time — Lower maintenance and servicing costs