Industrial metal products - Import export

Ceramic bearings Si3N4. Bearing cage PTFE. For most applications Si3N4 is the preferred material for ceramic bearings. Silicon nitride bearings are light, very hard and highly wear resistant. High and ultrahigh performance bearings are used in e.g. aerospace technology, metal production industries (high application temperatures), machine manufacturing, chemical industries (chemically aggresive substances), pharmaceutical and medical industries, semiconductor and biotechnology (clean room enviroments which may not be contaminated by lubricants). On request Special version with PEEK ball cage. Without ball cage.

The bench and floor scale Midrics® is a proven tough complete scale for reliable quality control, for example in the grocery, pharmaceutical, chemical, electronics and metal industries. Boasting a long product lifetime, they are robust and easy to clean. The indicator can be set up according to the use regardless of location of the platform and can even be mounted on a stand. Two easy-to-use indicators IP65 or IP67/IP68 protection classes A variety of finishes Load ranges of between 3 kg and 3 t Readability from 0.2 g to 200 g Platforms in various designs and sizes Verification mode A range of resolutions from 3,000 d to 15,000 d A wide range of interfaces An extensive range of accessories, options and add-ons

RACK CLAD BUILDING SYSTEMS Rack Clad Building Systems eliminates the roof and exterior siding needs of the warehouse and allows you to install a racking system. It eliminates roof and exterior siding needs and allows you to have a construction free racking system. Building construction is not necessa in advance with Rack Clad Building System. Rack Clad Building Systems does not require construction investment, providing a cost advantage from 18% to 30%. Since the use of columns and beams eliminated with the Rack Clad Building Systems, more space gained. Since the Rack Clad Building Systems are in demounted structure, it can easily be mobilized to another place and assembled. Corridor distances in building-free racking systems can be altered depending on type of loading equipment used. In the Rack Clad Building Systems, concrete is applied on the land/ shelves are xed on it, then exterior su ace is constructed by the facade covering (sandwich panel).

Metal furniture is designed for furnishing in various industrial and residential sectors. The components are parts of minimum 0,8 mm steel and milled or turned parts. The quality and design of the metal furniture finishing offer a special note.

The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.

AMETEK Specialty Metal Products is committed to meeting the demands of Metal Additive Manufacturing (AM) for mass-production of industrial components. We engineer economic AM powder of mainstream stainless steel, nickel, and cobalt alloys for non-rotor-grade components made by Laser Powder Bed, Binder Jet, and Cold Spray processes. Alloys As a leader in metal powder production for additive manufacturing, we offer several different alloys and size distributions specifically tailored for different additive manufacturing processes and machines. The most common additive manufacturing powder materials produced include: 316L (including A240 grade) 304L 17-4PH® We also offer specialty austenitic and ferritic stainless steels, as well as a selection of nickel and cobalt alloy powders for 3D printing.

ANDRITZ Kaiser produces highly precise presses for the metal forming industry, thus increasing productivity, quality, and lifetime and decreasing overall operating costs. ANDRITZ Kaiser has delivered more than 8,000 presses for numerous customers world wide, each different in its application. A large number of factors have to be taken into account when deciding on the right press: technical requirements from the product, expected productivity, technical requirements on the press line, integration into the existing production lines, fixed and running costs, process control, fast availability of maintenance/service, availability of spare parts – all these considerations influence mainly the total cost of ownership. Our press solutions are: Conventional high speed presses from 630 kN up to 4,000 kN Conventional stamping and deep drawing presses from 1,000 kN up to 8,000 kN Cutting presses from 1,600 kN up to 6,300 kN Heavy presses from 10,000 kN up to 25,000 kN Servo presses from...

Our ability to process corrosion resistant, conductive and high temperature alloys enables us to engineer precision materials that are highly suited for Industrial applications. Advanced Materials for Industrial Applications The precision strip and shaped wire materials we manufacture improve product performance in critical Industrial applications including: Weld Wire Sheathing for Flux Cored Wire and Metal Core processes Nickel-Tungsten Strip (NiW) for Superconducting Substrate Material Small Engine Needle Valves Bunched Nickel Wire for Thermocouple Wire Dedicated to Meeting Your Industrial Needs At AMETEK Specialty Metal Products, we take pride in developing material solutions that match the exacting needs of our customer for their Industrial applications. With a dedicated team of full-time metallurgists, we deliver a full service from material selection to supply.

Metal separators from motan can be installed at various locations in a production and for multiple applications. The metal separators prevent damage to your processing machine, tooling and end-products

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Erhardt+Leimer type: MD 1003 Working width 2700mm Detector speed from 0.5m / min to 400m / min Detects metals below 2mg with a diameter of 0.8mm

PAF offers a wide range of metal props with different load capacities. These are adjustable Props from 0.5 m to 5.00 m opening. Props Specifications: • Plate 120x120x4 mm • Barrel Ø55 thickness 2 mm • Slide Ø48 thickness 2 mm • Mechanically welded adjustment nut • Stamped Ring • Pin Ø12 Captive • Galvanized option available.

HODA, UAB produces plastic products for the electrical industry. Our company provides that services: mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting, assembly and packaging, local and international delivery.

HODA, UAB manufactures plastic products for the furniture industry. Furniture industry companies can give any request to produce plastic parts, plastic furniture parts or any other industrial products.

Made of galvanized steel sheet 1-2 mm Standard color: RAL 7035 (powder paint) Door fitted with locks and polyurethane gasket Door opening angle: 120° Protection degree up to IP66 IEC60529

PRODUCT: -Diversity and complexity of products: -Living element: variable volume and shape. -Delicate and fragile: easy to damage during handling. Coated with gelatine, chocolate, etc. -Unsteady: Lightweight, easily dislodged. CHARACTERISTICS OF THE MACHINES: -Versatile production line that can operate with different types of trays and papers. -An Omron technology robot arm allows us to increase the versatility and efficiency of the whole line, as the same robot can work with different tray formats. -A dispenser for muffin and fiancée capsules that places the capsules on the tray. -A muffin dispenser with seven nozzles, with volumetric dose regulation. -Two interchangeable seed dispensers. ADVANTAGES -Uniformity of the product. -The automation of the whole allows us to obtain a production of approximately 8,400 macarons/hour or more than 8,000 units/hour in muffins, madeleines or financée.

Our plant is fully automated and employs industry leading pre-treatment process OXSILAN®. OXSILAN® is a new metal pre-treatment technology that is free from hazardous chemicals and provides superior corrosion resistance for a wide range of metal substrates. OXSILAN® replaces traditional iron and zinc phosphate products. The products provide a superior ecological profile. OXSILAN® is suitable for metal surface treatment, e.g. cold rolled steel, aluminium, zinc coated steels, as well as multi-metal applications.