Industrial machinery equipment - Import export

Machine features Clamping force 2,600 kN. Size of the platens 500 x 630 mm (or 560 x 630 mm optional). Injection volume 1,000 or 2,000 or 5,000 cm³.

These are made by aluminium, used for the mechanical support and connection, after process then doing sandblasting + natural oxidation.

Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible

In the laboratory of Istanbul Dokum, for all productions, chemical analysis, mechanical yield – tensile – elongation tests, and when required hardness tests, UT, MT and MPI tests are provided.

The prime drink is made up of 10% coconut water and contains electrolytes, vitamins B, and the BCAA. And the manufacturer also stated with zero added sugar and caffeine and has around 20 calories per bottle. Hydration and energy drinks are renewed by boosting productivity when one engages the tedious activities. And although prime hydration is one of the Americans have turned to recently. Prime hydration more in the following sections including its founders and the variants and the storage. 12 Cans Box Prime Blue Raspberry Energy Drink Can | 355mL 12 Cans Box Prime lemon Lime Energy Drink Can | 355mL 12 Cans Box Prime Strawberry Watermelon Energy Drink Can | 355mL 12 Cans Box Prime Orange Mango Energy Drink Can | 355mL 12 Cans Box Prime Tropical Punch Energy Drink Can | 355mL 12 Pack Blue Raspberry Prime Hydration Drink | 500ml 12 Pack Ice Pop prime Hydration Drink | 500ml 12 Pack Grape Prime Hydration Drink | 500ml

ZWP is one of Germany’s largest independent gear, pinion and shaft manufacturers. We manufacture according to customer drawings and supply renowned customers from a wide variety of industries. We also supply renowned customers on an international level with our products for mining technology. Here is an overview of our production possibilities: Internal toothed rings hardened and grinded Module up to 20 mm Diameter 100 to 1,800mm Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Interlocking shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible We manufacture for different customers: mining, rail, wind power, shipping, industry and special machinery. Production is carried out according to customer drawings and standards. Further information in the first interview. We look forward hearing from you.

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable and scalable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Functional design for installation in R&D area Techanical features • Batch size: 1,4 / 3 / 7 / 20 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm

Pressure vessels, reactors, Pharmaceutical and biotech pressure vessles, Process containers, storage tanks, Modules, components, plants, High-pressure apparatuses,Heat exchangers, vaporisers, condensers, Cryo pressure vessels, technologies Nuclear technology, Vacuum chambers, vacuum apparatuses, Columns, according to PED (EN13445 / AD-2000), ASME (U-Stamp), China Stamp (A1), TP TC 032/2013 (EAC) Pharmaceutical and biotech apparatuses are calculated and manufactured according to your requirements. Stainless steel and special materials are used in the production. After that, the products are grinded, electropolished and tested using non-destructive testing methods, such as ferrite measurements, used for the determination of the ferrite content, or by using the riboflavin test to measure total discharge and CIP/SIP capability. All materials, methods and processes used have been documented in full in detailed QA documents and can be tracked at any time. You can depend on KASAG.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and ring gears. We supply already well-known manufacturers for gear boxes, drive technology and are looking forward to new customers. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / ring gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English. ZWP is looking forward hearing from you.

NP-LC automatic spindle capper is almost a universal capper, it is sutiable for capping screw caps, flip flop caps, spray caps, drops caps, metal caps, twist off caps. An automatic spindle capping machine is a device used to cap containers with screw-on caps. The machine works by placing the containers under a series of rotating spindles, which spin the caps onto the bottles or jars. The spindles are adjustable to fit different sizes and shapes of containers, and the speed can be adjusted for different production rates. The machine may also include features such as a cap sorter and feeder, a conveyor system to move the containers through the process, and controls to ensure proper torque and alignment of the caps. Automatic spindle capping machines are commonly used in industries such as food and beverage, pharmaceuticals, and cosmetics, where precise and efficient capping is necessary for product safety and quality.

With the thread adapter made of high-quality stainless steel 1.4301 (304) a pump, a drain cock or any other connection with thread G 2" (Whitworth pipe thread) can be screwed onto a container with G 1 1/2" thread. The thread adapter adapts and thus compensates for different thread shapes. The drum adapter ensures that decanting is liquid-tight; a seal made of ePTFE reliably seals the connection. The thread adapter made of stainless steel is electrically conductive and highly chemically resistant. It can therefore be used for filling solvents and other flammable liquids (e.g. alcohols, petrol, diesel etc.) as well as for weak alkalis and acids.

With Novartos Multi double sampling, a double multi-point sample can be taken from multiple predefined sample zones. Depending on the lenght, four, seven or nine sample chambers are each fitted with two sample inserts for the double sampling.

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

Due to the individual speed control, the Roots pumps of the innovative HiLobe® series offer a nominal pumping speed range of 520 - 2,100 m³/h and can be perfectly adjusted to customer-specific requirements. In general, Roots pumps need a backing pump adapted to the gas flow and which is suitable for the application in order to operate.

The task of storing liquids hazardous to water or to their processing must be handled responsibly. In the building of the corresponding process containers, storage tanks, stainless steel containers, different factors must be taken into consideration. They are designed according to regulations, such as PED (AD-2000, SVTI, EN13445) or according to special standards, such as the Basel chemical standard BN76 and manufactured in stainless steel. Process containers and storage tanks have half-pipe coils, jackets or laser-welded structures (pillow plates) for heating and cooling purposes. KASAG is the competent place if you are looking for replacement, modification, extension or reconstruction of complete tank plants. We will share your responsibilities.

This machine is used for plastic round, shaped or square bottles unscrambling equipment. No matter what the status of the bottle feeding, the machine can automatically complete the bottle feeding, bottle unscrambling, flip, arranging, bottle output, and connected with later packaging equipment. The machine uses high quality stainless steel or non-toxic pollution-free engineering plastic, adopts mechanical transmission technology, different bottles can work on a machine by adjusting machine parts, has stepless adjustable speed, simple operation, high degree of automation.

Fully Automatic Tracking Capping Machine Emotion Control is designed base on inline pick and place capping machine, it solve the low capacity of the inline pick and place capping machine, its movement is control by Motion Controller more efficient and accuracy than PLC, the capping heads are moving tracing with the bottles going when capping. it can be equipped with one or two capping heads, capacity is from 40b/m to 70b/m without thinking the size of the bottle and cap (base on 100ml to 5000ml bottle). This machine has the advantage of bottle non-stop working, so after the filling machine, even almost full of liquid inside, the liquid will not splash out when capping. It applies high efficient servo system, including the belt servo, horizontal moving servo, up and down moving servo, and servo capping head system Automatic gripping and capping are completed by the servo motor, and the movement is precise and the speed is fast.

it is widely application for the container pasting with two front and back labels, it is one type of self adhesive labeling machine, single and double side labeling is option, using for round container, square and flat container, also carton, boxes ,ect. It is automatic controlled by PLC easy operating. It can change specifications easily. It adopts servo motor, achieved closed loop control low malfunction rate. High efficiency. Double sides labeler we also call it as front and back labeling machine, for it is pasting two labels front and back. Advantages: 1. PLC CONTROL, Automatically check the length of labels 2. Equipped with warning device of insufficient labels, broken labels 3. No bottle, no labeling 4. No labels, no labeling 5.Servo motor control, stable labeling

NP-HL Automatic horizontal Labeling machine is designed for the vial bottles and container such as ampoul, blood tubes. It adopts horizontal transmission and horizontal labeling to increase stability and improve labeling efficiency. The label can be printed with the production date, batch number and spray bar code. It can be equipped with inkjet printer to the conveyor belt, which can print the production date, batch number, bar code and other information on the product before or after labeling. Automatic horizontal round bottle labeling machine is suitable for labeling on the circumferential surface of round bottles, can be labeled single label and double label, the spacing between the front and back double standards can be flexibly adjusted, such as gel water round bottle, food round can and other labels, widely used in cosmetics, food, medicine, disinfectant water and other industries

The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

For the formation of pre-defined package units downstream of a Bizerba labeling system The fully automatic TU 100 unit maker consists of an electrically driven, two-part package removal station with an electro-pneumatic diverter arm. It makes units according to predefined criteria, optimizing the packing process and the control of sum labels for the packages. Up to 100 packages per minute are possible. The TU 100 can be optionally fitted with a roller conveyor or a belt conveyor. (optional)

The Flottweg Belt Press is in use in many mechanical separation technology areas, especially in the production of fruit juice, concentrate and vegetable juice. But other products, too, such as algae extracts, coffee grounds, herbal extracts, soy, and starch, are produced using belt presses. Flottweg Belt Presses: ►Maximum quality: You obtain not just the best possible quality, also maximum yield at lower costs. ►Minimum operating difficulty: Its clear design makes it easily accessible for cleaning, operation and maintenance. Automatic belt control provides optimum tension and guidance of the belts. ►Long-lasting design: The consistent use of stainless steel means that the belt press not only meets the requirements of strict hygienic standards, also is built tougher to last longer. ►Flottweg Service: We are at your side at any time with years of experience and comprehensive know-how.

With this animation, we try to give a brief and clear explanation of our system for the food industry in a playful way. More details on this and possibly other Reinasan systems can be found here on Europages, our website and on our YouTube channel. We'd love to hear from you! Feel free to send us a message via this platform. Have fun watching!

This machine offers high-efficient removal of production-related elastomer residues on metal and thermo/duroplatstic parts – without using chemicals. The T30 is, like any of our machines, designed for high performance at low consumption of nitrogen and electric energy. The machine is especially designed for mid to high batch needs. This machine will be manufactured individually in accordance to the costomer needs!

This machine offers high-efficient removal of production-related elastomer residues on metal and thermo/duroplatstic parts – without using chemicals. With its small footprint, the compact machine can be integrated into the production line easily. This saves temporary storage or extra transports and finally corresponding time loss and costs. The T10 is, like any of our machines, designed for high performance at low consumption of nitrogen and electric energy. The machine is especially designed for smaller batch needs. This machine will be manufactured individually in accordance to the costomer needs!

This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.

cryogenic decoating of big-sized parts Take advantage from our experience! We offer customized solutions for: ■ decoating of big-sized parts (e.g. vulcanized metal housings, tools, etc) ■ devices for metal shringking-work The individuel customized solution will be performed according to customer specification!