Industrial heating elements - Import export

We are using CNC - technology for the laying of thin and insulated heating wires on a variety of carrier materials in order to manufacture all kinds of heating elements. We can work up to sizes of 2 x 2 m, and we can realize medium series (500 - 10.000pcs.) as well as high volume productions (up to 1 million pcs.). All voltages from 3,7V up to 480V are possible. With our elements we can reach temperatures of up to 200°C. Please do not hesitate to contact us!

Aramid fibers are suitable for very demanding applications and they are widely used in the firefighting industry (manufacturing of firefighters’ clothing) because of their flame retardant properties. Aramid is not only fireproof, the aramid fibers also have a high tensile strength, which is why they are often used for bulletproof vests (military and police) or for armoring selected emergency vehicles. A special property of aramid nonwovens is its good thermal insulation. The laid heating wire creates a very high heat output, which is insulated by the nonwoven. Aramid has a high heat resistance, which is an enormous advantage since laying the heating wire generates a very high heat output which is further enhanced by the insulation provided by the aramid nonwoven carrier. In addition, the nonwoven is either not combustible or flame retardant and can be used for a temperature ranges of up to 200°C.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

InduStrip EZ2 radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators are for commercial use like in department stores, warehouses or industrial buildings. The heating elements emit no light and thanks to the clear design, the EZ2 inconspicuously integrates into the electrical installation. Recommended mounting height up to 3.5m.

It is characterized by good susceptibility to machining. It is very susceptible to hot forming and forging. It is widely used in the production of forged parts with complicated shapes parts for pipe fittings industrial terminals heating elements plumbing industrial fittings We also have other nonferrous materials on sale.

The protective tube of silicon nitride material has high thermal conductivity, high temperature resistance, corrosion resistance,non-wetting with molten metal, and electrical insulation, making it the best choice for heating body protection tubes. The advantage of the immersion holding furnace is very obvious, and in order to achieve the immersion of the heating element into the molten metal, it is necessary to have a protective tube which can protect the heating element well. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Metallic heaters made from ML or tungsten are made for very high temperatures between 1000 °C (1 832°F) and 2 800 °C (5 072 °F). Plansee supplies heating elements for all types of high-temperature furnace in the form of ribbon, sheets, rods, twisted wire, wire bundles and wire mesh heaters. Plansee's materials belong to the group of refractory metals. Molybdenum and tungsten are the two materials that are most commonly used in high-temperature thermal processes. Thanks to their high melting points, they do not soften even at very high temperatures. Refractory metals have a lower coefficient of thermal expansion and better thermal conductivity than steel.

Mechanically durable and thermally shock resistant, PBN/PG heaters are unaffected by vibration under most conditions and can be tailored to thermal gradients for specific requirements. With an ultra-fast response and low thermal mass, PBN/PG heaters demonstrate a power output of 35 watts/cm 2 (225 watts/in 2 ) and higher.Size customization, please let me know the use temperature, current and voltage. -Crystal growth (VGF, LEC Crucible) -Molecular Beam Epitaxy(MBE) Crucible -MOCVD Heater -PBN Infrared Window -Traveling Wave Tube (TWT) (PBN Support Rod) -PBN Coating Graphite -High temperature, vacuum equipment insulator

Electric 12V 13V Alumina Ceramic Heating Element Heater Rod for Oxygen Sensor Advantages Ceramic Heater for Oxygen senster is used for heating oxygen sensors that detect the exhaust gas of vehicles and is equipped to most of automobile gasoline engines. Because the temperature can be rapidly raised, it is possible to activate the sensor immediately after the engine start which provides useful feedback to reduce emissions. 1.Based material: a.white alumina ceramic b.the content of alumina is no less than 95%. c.the tungsten slurry is printed on the ceramic tape, laminated by hot pressing, and thensintered under the protection of a hydrogen atmosphere at 1650 ° C 2.Ni-wires:N6 Ni-wires with 0.6mm diameter 3.Brazing material: siliver-copper braging alloy

Underfloor heating pipes are the most important component of an underfloor heating installation. Thanks to its features, it will provide a homogeneous heat distribution in the house or building where heating is desired. Since it will be laid under the floor and covered, choosing the highest quality products is the most important factor for years of trouble-free use. Aldea oxygen barrier underfloor heating pipe is made of high quality material and will perform its heating function without any problems for many years when applied according to the rules. Since underfloor heating systems operate at lower temperatures, they heat up and cool down slower. Once full heating is achieved, much more efficient heating can be achieved by consuming much less energy compared to radiator or blower systems.

Aldea Luxury Type Collector Cabinet is made of high quality sheet metal. Universal pipe outlets are delivered pre-drilled. The frame is removable and adjustable. In this way, after the construction work is completed, you can complete the installation process by adding the frame cleanly. Usage areas: It can be used safely as a collector (manifold) cabinet in all areas where underfloor heating installation applications can be made.

Aldea ALD100 SET wireless room thermostat is the component that is extremely easy to install and use and maximizes energy efficiency in a heating system. Connect the receiver to your existing combi boiler, heat pump, etc. After connecting it to your device, you can start using it directly by placing the transmitter either on the stand or on the wall hanger in your environment. The product controls whether your heating device will be activated or not, depending on the ambient temperature you are in and the temperature value you specify. When the temperature drops 0.5 °C below the level you set, the thermostat activates and enables your device to work, and when the ambient temperature reaches 0.5 °C above the value you set, it stops your device from working.

Aldea ALD100 room thermostat is the component that is extremely easy to install and use and maximizes energy efficiency in a heating system. Existing boiler, heat pump etc. After connecting your ALD100 room thermostat to your device by pulling a cable from your device to the area where you want to position the room thermostat, you can start using it directly by mounting the wall hanger on the wall. ALD100 room thermostat controls whether your heating device will be activated or not, depending on the ambient temperature you are in and the temperature value you specify. When the temperature drops 0.5 °C below the level you set, the thermostat activates and enables your device to work, and when the ambient temperature reaches 0.5 °C above the value you set, it stops your device from working.

Aldea BLT 8-3 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-14 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-22 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-16 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-12 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 2-18 DN25 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea corner trimmer is the components that should be used in underfloor heating installations where 90° turns of pipes are required.

Aldea pipe holder hook is one of the necessary components for fixing pipes in underfloor heating installations.

Aldea pipe connection fitting is one of the necessary components for pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea female return fitting is one of the components required to provide pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea male return fitting is one of the components required to provide pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea automatic air vent is used to automatically evacuate air that may occur in heating and ventilation systems. In this way, noise that may occur in your heating system, damage that may occur in the circulation pump, corrosion of other components in the system and regional thermal imbalance that may occur at the installation end points are prevented.

Aldea PEX corner radiator valve ensures that temperature control in radiator installations is completely in your hands.