Industrial ethernet - Import export

Modern automation solutions need universal communication cabling for the differentnetworks. High speed connectors are demanded in the circuit between the office world and the production level. The M12x1 X-coded connectors have been developed for such applications. These components are designed for transmission technology according to CAT6A and 500 MHz/10 Gigabit, and are standardised to IEC 61076-2-109. The X-coded connectors have 4 shielded pairs, for reliable high speed data transfer, and industrial grade materials for harsh environments, all in the small M12 connector.

Bus technology has advanced over the last few years in industrial automation. The connectors required for data transmission are very bus-specific in their design. To access the very complex world of bus technology, CONEC offers connectors for Profibus DP, Device- Net and Industrial Ethernet 10 Gbit. Profibus is a manufacture-dependent, open field bus system for a variety of applications in manufacturing, processing and building automation. Industrial Ethernet is the general term for all applications that use the Ethernet standard to network devices used in industrial automation.

In industry and transport, M12 connectors are used for sensor / actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role. The new CONEC M12 field attachable connector with screw connection offers the appropriate solution and is available in codings A, B, D, and X.

Modern automation solutions need universal communication cabling for the differentnetworks. High speed connectors are demanded in the circuit between the office world and the production level. The M12x1 X-coded connectors have been developed for such applications. These components are designed for transmission technology according to CAT6A and 500 MHz/10 Gigabit, and are standardised to IEC 61076-2-109. The X-coded connectors have 4 shielded pairs, for reliable high speed data transfer, and industrial grade materials for harsh environments, all in the small M12 connector.

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

In industry and transport, M12 connectors are used for sensor/actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role. The new CONEC M12 field attachable connector with crimp connection offers the appropriate solution and is available in codings A, B, D, and X.

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual iinear or slider adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Electronic position indicator with plug connection for magnetic sensor. Integrated Industrial-Ethernet-Fieldbus. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Display accuracy up to 0.01 mm. Absolute function via internal backup. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. IP53 type of protection, IP65 as an option.

The IF2035 interface modules are designed for easy connection of Micro-Epsilon sensors to Industrial Ethernet controllers, e.g., plant control systems. The PROFINET and EthernetIP modules are compatible with sensors that output data via an RS422 or RS485 interface. These modules operate on the sensor side with up to 4 MBaud and have two network connections for different network topologies. Installation in switching cabinets is via a DIN rail.

With a maximum nominal torque of 14 Nm, the new AG24 is a real power pack for format adjustment Easy mounting. Stainless steel hollow shafts up to max. Ø 20 mm. “Manual” traveling without control via micro-button. Brushless 160 W, 24 V DC motor with long service life. Integrated absolute position encoder on the output shaft. Integrated positioning controller. Integrated spring-operated brake (option). 2-line LCD for target and position value and operating keys. Integrated Industrial-Ethernet-Fieldbus. M12 component mounting technology. Manual emergency adjustment.

Compact dimensions, high power density. Easy mounting and commissioning. High flexibility, high protection category. Stainless steel 20 mm hollow shaft, robust housing. Brushless EC motor with a long service life. Solid absolute sensor, magnetic sensing technology. Integrated power and control electronics. Integrated Industrial-Ethernet-Fieldbus. Integrated positioning controller. M12 component mounting technology.

Ultra-compact and powerful actuator with hollow shaft, Industrial Ethernet interface and 5 Nm nominal torque for demanding, fully automated positioning jobs. Small dimensions, high power density. Easy mounting and commissioning. High flexibility, high protection category. Stainless steel 14 mm diam. hollow shaft, robust housing. Brushless EC motor with a long service life. Solid absolute sensor, magnetic sensing technology. Integrated power and control electronics. Integrated Industrial-Ethernet-Fieldbus. Integrated positioning controller. M12 component mounting technology.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual machine adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Integrated Industrial-Ethernet-Fieldbus.Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S and AP10 position indicators. IP53 type of protection, IP65 as an option

Industrial Ethernet Profile AG26 Fieldbus/IE: compact dimensions, high power density easy mounting and commissioning High flexibility, high protection category stainless steel 20 mm hollow shaft, robust housing Brushless EC motor with a long service life solid absolute sensor, magnetic sensing technology integrated power and control electronics integrated Industrial-Ethernet-Fieldbus Integrated positioning controller M12 component mounting technology

Industrial Ethernet Profile AG25 Fieldbus/IE: Small dimensions, high power density easy mounting and commissioning High flexibility, high protection category stainless steel 14 mm diam. hollow shaft, robust housing Brushless EC motor with a long service life solid absolute sensor, magnetic sensing technology integrated power and control electronics integrated Industrial-Ethernet-Fieldbus Integrated positioning controller M12 component mounting technology

The Kuhnke FIO Controller 116 CNC is a PLC based on i.MX6 with integrated CODESYS PLC. In addition to the POUs made available in CODESYS SoftMotion, CODESYS SoftMotion CNC contains POUs for CNC functionality, different kinematic transformations with the appropriate visualization templates and the robotics axis group editor. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events.

The Kuhnke FIO Controller 116 is a PLC based on i.MX6 with integrated CODESYS PLC. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. As far as mechanic properties and form factor are concerned, the controller matches the FIO I/O modules, which can be attached directly to form a mechanically and electrically homogenous unit. Using an additional extender module also the control of remote EtherCAT slaves is possible. It can be easily integrated by the number of interfaces (Industrial Ethernet, RS232, CAN) and supported systems into existing control concepts. ; Fanless ARM processor technology; To be extended with FIO modules; CODESYS V3 with EtherCAT®; Optional: CODESYS SoftMotion

ODOT-MS100T series is a basic plug and play industrial-grade unmanaged Ethernet switch, euqipped with 5/8/16 10/100 MB ports, all ports supports IEEE802.3/802.3u/802.3x, supports broadcast storm protection, adapt to various industrial environment, protection grade is IP20. The product adopts metal sheel and supports 35 mm DIN-rail installation. ODOT-MS100T series is a basic plug and play industrial-grade unmanaged Ethernet switch, euqipped with 5/8/16 10/100/1000 MB ports, all ports supports IEEE802.3/802.3u/802.3x, supports broadcast storm protection, adapt to various industrial environment, protection grade is IP20. The product adopts metal sheel and supports 35 mm DIN-rail installation.

Elap encoders MEM-Bus EtherNet/IP can be easily integrated in any EtherNet/IP net, as they comply with all EtherNet/IP interface requirements, according to directives IEC61784-1. The encoder features the encoder profile 22H according to CIP™ protocol specifications.The encoders are ODVA conformant certified, including CIP Sync certification.MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments. MEM-Bus EtherNet/IP are UL certified for the Canadian and United States market.

Thermal imaging system based on the Raytek MP150 infrared linescanner Automatic temperature and quality monitoring in continuous web processes Detect thermal problems early Faster product changes and reduced setup time Communicate with process control system via OPC Reduce scrap APPLICATIONS Plastics, metals, paper, and building industries, combustion prevention, hotspot detection, flat and float glass production, automotive, food processing and numerous other industrial applications FEATURES Onboard Ethernet TCP/IP communication Product specific configurations or “recipes” Custom measurement sectors Optional analog and digital outputs for each sector Analog outputs 3 x 4 – 20mA PC-independent alarm output Visualisation on PC Software supports English, German, French, Finnish, Dutch and Italian languages

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

M12 Power L-coded - A new standard for miniaturised power supply. M12 Power with L-coding as the new standard connector for 60V/16A DC power supply. The connector is standardized to IEC 61076-2-111

The CONEC connector series with bayonet quick locking system allows safe and quick locking even in areas that are difficult to reach and/or not visible. With the "three-point" bayonet locking it is possible to lock the connection by hand with a 90 ° turn. You get a direct tactile and acoustic feedback as soon as the connector is locked. The connectors are designed according to the draft standard IEC CD 61076-2-011/Ed1. In order to meet the mechanical requirements with regard to tightness to dust and liquid media in industrial environments, no additional tools are required for the new M12 bayonet version by CONEC. When locked, the requirements of protection degrees IP65, IP67 and IP69K are met. In addition, the new series is shock and vibration resistant according to the railway requirements IEC 61373:2010, class 1B. The CONEC bayonet locking variant thus offers simplified handling and at the same time secure transmission of signals and data to the user.

The award winning MATRIX-F II FT-NIR spectrometer allows the direct measurement in process reactors and pipelines, leading to a better understanding and control of the process. Accurate in-line results in seconds Multiple components per measurement Non-destructive analysis Optional built-in 6-port multiplexer Direct method transfer Rugged design Ethernet connectivity and industry standard communication protocols

The HIPERDRIVE HDA 70 positioning drive allows adjustment procedures for positioning and auxiliary axes to be performed efficiently, at low cost and with a high degree of precision. The HIPERDRIVE is available with Industrial Ethernet interface for direct connection to a control module. Status massages retrievable via bus. With an durable EC motor.

ALL-IN-ONE CONTROL - performs all machine functions in a unified hardware design; Logic Control, Operator Interface, I/O and Networking. MODERN MEMORY ARCHITECTURE - based on a custom designed SOM (System on Module) utilizing a powerful ARM microprocessor and 100% non- volatile memory for reliability. HIGH-PERFORMANCE LOGIC ENGINE - fast scan times solving user logic using Variable-based Advanced Ladder logic or the IEC 6-1131 language set. ONLINE PROGRAMMING - make logic changes without stopping the controller. nearly instantaneous screen updates. ADVANCED HIGH-SPEED COUNTER - four built-in counters supporting frequencies over 500 kHz. INDUSTRIAL ETHERNET AND REMOTE CONTROL - Ethernet IP, Modbus TCP and BACnet IP; FTP file transfer, Email. WebMI* for web-based Remote Monitoring; Push data to the cloud with MQTT* Sparkplug. *WebMI/MQTT require one-time license. PLUG-AND-PLAY DATALOGGING - record machine and process variables to microSD or USB Flash Drive.

Simple and trustful CDMA 450, 2G, 3G, 4G LTE Cat.3, LTE 450 MHz Cat.1 routers DIN-rail mountable, universal router product family with wireless data forwarding capabilities, Ethernet port and industrial design. The device uses the open source OpenWrt operation system and provides web admin interface. Communication • Supporting the CDMA 450, 2G, 3G, 4G LTE Cat.3 and the LTE 450MHz Cat.1 (Telit modules) • Ethernet LAN/WAN Software/Configuration • Easy to use open source OpenWRT® software with webadmin interface • Opportunity for the developers to implement and use self-developed system or applications • Firmware & software updates and parametrizing remotely by the M2M Device Manager software Security • System monitoring, auto restart mode • High availability and stable IP connection Application - Wireless data transmission, routing - Secondary/backup route - Industry, DVR

TKD | 03 BUS, LAN, FO-, coaxial & video cables in the field of production automation for reliable data and energy transmission (e.g. between sensors, actuators and controllers), for high flexible applications (e.g. power chains, gantry robots, pick&place units, conveyors, machine tools, automated production systems, etc.) - BUS | FIELDBUS technology – for industrial, process & building automation - LAN | ETHERNET-Technologie –for structured industry & building cabling - FO BUS-Technologie – optical data transmission - Coaxial & video cable Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized, listed > for fixed installation > for high flexible drag chain & robotic applications Excerpt of products: PROFIBUS - MULTIBUS - INTERBUS - CAN BUS - DeviceNet - FoundationFieldbus - ASi-BUS - SafetyBUS - EIB/KNX BUS - PROFINET - INDUSTRIAL ETHERNET Cat.5e...Cat.7A - POF - SIMPLEX, DUPLEX